Who are these printers for?

Photographers assessing paper and colour

If you want to assess the tones and finish of work for an exhibition on your chosen paper, you’ll benefit from a suitable print size and colour management. Epson Netherlands and Canon Netherlands explain ICC profiles and colour management for specific media.

Photographers making lots of proofs

If you regularly print new edits, compare the convenience of the ink supply and running costs, while keeping paper suitability in mind. Epson Netherlands states that the ET-18100’s photo yield is based on 10 × 15 cm prints; this is not a yield guarantee for larger proof prints.

Photographers with limited workspace

If you want to print at home, weigh up your preferred print size against the space needed for the printer and paper feed. Also check that the connectivity and software suit your computer workflow.

What should you consider when choosing?

A3+ pigment inkjet

Suitable if: you want to make proof prints on matte or other suitable fine art paper, and the model supports the paper feed you need.

Bear in mind: ink, paper and potential maintenance costs; Epson notes that the SC-P700 uses ink during its initial setup.

A3+ dye inkjet

Suitable if: you mainly want to make colour and composition proofs on suitable photo paper.

Bear in mind: the Canon PIXMA PRO-200S uses eight dye-based inks; a proof on one type of paper won’t necessarily predict the result on another.

Photo printer with ink tanks

Suitable if: you regularly print lots of versions and refillable tanks suit your workflow.

Bear in mind: yield figures for small photos don’t directly reflect the cost of larger proof prints; also check paper support and print size.

Dye sublimation on dedicated photo media

Suitable if: a supported photo size and the available finish meet your assessment needs.

Bear in mind: the DNP DS820 uses specific paper-and-ribbon media and is not a direct substitute for prints on freely chosen fine art paper.

What to consider What to check Who is this important for?
Colour and tone Check that there’s a usable ICC profile and a suitable print workflow for your combination of printer, ink and paper. Epson Netherlands and Canon Netherlands explain colour settings relating to profiles and media. If I want to assess tones and dark areas before displaying a piece, I want the proof to match my printer and paper. Around 33% of consumers prioritise assessing colour and tone.
Paper, finish and size Compare your preferred proof size and specific paper type with the media and feed supported by the model. If I want to assess the finish and size of my planned display, I choose paper that matches. Around 27% of consumers prioritise paper and size.
Repeated proof printing Compare ink, paper and maintenance costs for your own proof size; don’t use yield figures for small photos as an indication of the cost of A3+ prints. If I want to print several versions of an image, I consider the ink supply and what my own print size requires. Around 20% of consumers prioritise convenience and running costs for repeated printing.
Workspace and workflow Check the space needed for the printer and paper feed, connectivity and software support, and whether you need extra features such as scanning. If I have limited space at home, I want to know in advance how much room the printer and paper will take up and how I’ll print with it. Around 20% of consumers prioritise how well it fits their space and how easy it is to use.

A print made at home won’t automatically predict what a print from another printer or print service will look like. If the final exhibition print will be produced using a different workflow or on different paper, assess a proof from that workflow too.

Common pitfalls

  • Assuming a proof on any photo paper will predict the final matte print

    Glossy and matte paper can differ in colour gamut and how they render dark tones. So a proof won’t necessarily show you how the same image will look on a different final print medium.

    Where possible, make a proof on your intended paper and use a suitable profile. Also take the workflow for the final print into account when assessing it.

    A different final print medium may mean you need extra paper and ink for a new proof.

  • Using the yield for small photos to estimate the cost of A3+ prints

    Epson’s stated yield for the ET-18100 is based on colour photos measuring 10 × 15 cm and doesn’t reflect the yield for larger proof prints.

    Compare ink use and paper costs for your own print size, rather than directly converting the yield figure for small photos.

    For large proof prints, the amount of paper and ink used per print may differ from what the yield for small photos suggests.

  • Assuming dye sublimation works on any exhibition paper

    DNP specifies its own media sets and supported print sizes for the DS820; this is not the same as printing on freely chosen fine art paper.

    Before buying, check that the available size and finish suit what you want to assess.

    You may need the compatible paper-and-ribbon media or have to choose a different printing method.

Brands to compare

Epson

The product range discussed includes the SureColor SC-P700 for specialist proof printing, as well as the A3+ EcoTank photo printers ET-18100 and ET-8550.

  • Epson states that the SC-P700 uses UltraChrome Pro 10 ink and that ink is used during initial setup. The ET-18100 has six colours and refillable tanks.
  • The ET-18100’s stated photo yield applies to 10 × 15 cm photos and isn’t a yield guarantee for larger exhibition proofs.

Canon

The A3+ models discussed follow two different inkjet approaches: the imagePROGRAF PRO-310 and the PIXMA PRO-200S.

  • Canon Netherlands specifies ten individual inks for the PRO-310, and eight dye-based inks and manual media feeding for the PRO-200S.
  • These model specifications don’t mean that every Canon model can handle every type of exhibition paper; check support for your paper.

DNP

The DS820 is a specialist dye-sublimation printer for photos on supported paper-and-ribbon media.

  • DNP lists several finishes and, among others, the 20 × 30 cm media size.
  • The printer uses dedicated media sets and doesn’t offer the standard A3+ size. Check that the available media suit the final print you want.

Products on Joybuy

Related products will be available soon.

Frequently asked questions

Can a print made at home exactly predict the final exhibition print?

Not automatically. Paper affects visible colour and how black is rendered, while a screen emits light and paper reflects it. Use colour management suited to your proof. If the final print will be made elsewhere or on different paper, assess a proof from that final workflow too.

How do I get started with colour management for a proof print?

Choose your paper first, then check whether a suitable ICC profile and settings are available for your printer. Canon explains soft proofing with media profiles; Epson explains ICC profiles and media settings. Check which software and profiles are available for each model.

What should I consider when it comes to initial setup and maintenance?

Allow for ink use during initialisation: Epson notes this for the SC-P700 and says that an additional maintenance box is included. Follow the manual for your chosen model when cleaning and carrying out maintenance.

What warranty and cooling-off period apply to online purchases in the Netherlands?

For a consumer purchase, the ACM says you’re entitled to a legal guarantee covering what you can reasonably expect from the product under normal use; this isn’t simply a fixed two-year period. For distance purchases, the Dutch government says that in many cases you have a 14-day cooling-off period. Check whether these rules apply and review the conditions for your purchase, especially if you’re buying for business.

Where can I take an old printer?

When you buy a similar new appliance, a private individual can use the free one-for-one take-back scheme for an old printer, including for online purchases. The Dutch government also lists collection points and municipal recycling centres. The one-for-one take-back scheme described here doesn’t apply to business equipment.