Who are these studio monitors for?

Percussion editor with a sit-stand desk

You switch between sitting and standing, and want to assess the stereo image and monitor direction in both working positions. Genelec recommends pointing the monitors towards your listening position.

Producer checking kick drums and bass

You want to assess the bass as well as attack and timing. Consider whether your monitors and room are up to the task, or whether you need a properly calibrated subwoofer.

Producer with a small workspace

You have limited room for two speakers and want to check the cabinet dimensions, connections and contents of the order in advance.

Buying considerations

Compact active nearfield monitors

Choose these if: you can position two speakers symmetrically and mainly assess percussion timing, stereo placement, mids and treble.

Bear in mind: a compact cabinet saves space, but its stated low-frequency limit doesn’t tell you how the bass will sound at your listening position.

Larger active monitors

Choose these if: your desk, listening distance and setup give you room to assess more bass from the main monitors.

Bear in mind: a lower stated limit won’t automatically fix room resonances and reflections.

Nearfields with a subwoofer

Choose these if: you need to assess the lowest parts of kick drums or other percussion, and have room to calibrate the subwoofer.

Bear in mind: the placement, crossover, level and phase need to work with the main monitors. Genelec notes that the position with the most bass doesn’t necessarily produce the flattest response.

Passive studio monitors

Choose these if: you already have a suitable power amplifier or deliberately want to put together a separate amplification system.

Bear in mind: you’ll need a suitable external amplifier as well as the speakers.

Buying consideration What should you check? Who is this for?
Positioning at different desk heights Check the cabinet dimensions, the space available for two speakers, and whether stands or an adjustable setup can point the acoustic axes towards your ears at both listening heights. I switch between sitting and standing and want both speakers to stay aimed at my listening position; around 31% of consumers prioritise positioning for both desk heights.
Percussion detail and stereo image Compare the space available for a symmetrical setup and the adjustment options on the exact model. Assess the result at your own listening position. When editing percussion, I want to assess hits and left-right information without overlooking the effect of an uneven setup; around 31% of consumers prioritise detail and stereo imaging.
Bass for kick drums and deep percussion Only compare frequency limits when they use the same dB definition. Check whether you can assess the relevant bass at your listening position and calibrate a subwoofer. I want to know whether the lowest parts of a kick drum are audible enough to assess where I listen; around 23% of consumers prioritise checking the bass.
Connections and a complete stereo setup Check whether the box contains one speaker or a pair, which audio inputs are available, and which cables or amplification you already have. I want to connect a working stereo system without finding out unexpectedly that I’m missing a second speaker or an amplifier; around 15% of consumers prioritise what’s included and ease of connection.

What to watch out for

  • Comparing frequency limits in hertz alone

    A stated limit using a different dB reference isn’t directly comparable. The room also affects what you hear at your listening position.

    Compare models using the same dB definition, and assess the bass where you work.

  • Assuming one speaker is a complete set

    Some models are sold individually. For stereo work, you may need two speakers.

    Check what’s included in the offer before deciding what you need for a stereo pair.

  • Assuming a larger cabinet or subwoofer will fix every bass issue

    The room affects the bass. A subwoofer also needs to be positioned and calibrated to work with the main monitors.

    Assess your listening position first, and treat any upgrade as part of the whole system.

  • Comparing active and passive monitors as if they’re equally ready to connect

    Active monitors have built-in amplification; passive monitors need a suitable external power amplifier.

    Compare the complete system with the equipment and connections you already have.

Relevant brands to consider

Genelec

The active 8020D is a compact option if space is a key consideration.

  • Genelec lists the 8020D’s dimensions as 242 × 148 × 142 mm, including the Iso-Pod, and its frequency response as starting at 56 Hz at −6 dB.
  • These specifications don’t prove that kick drum bass will be audible enough in every room.

Yamaha

The active HS range includes the HS5 and the larger HS7, allowing you to weigh up size and the stated low-frequency limit.

  • Yamaha lists XLR and TRS inputs and ROOM CONTROL/HIGH TRIM for the HS5. The stated lower limits are 74 Hz for the HS5 and 55 Hz for the HS7, both at −3 dB.
  • Yamaha states that the HS5 and HS7 are packaged individually, so check how many you need. These frequency limits are manufacturer specifications, not measurements taken in your workspace.

ADAM Audio

The active T5V is a nearfield option for a smaller workspace.

  • ADAM Audio lists the T5V’s frequency response as starting at 45 Hz at −6 dB. It has a rear bass reflex port and is compatible with the T10S subwoofer.
  • Bear in mind how close it is to the wall behind it. The −6 dB limit isn’t directly comparable with a limit stated at −3 dB.

JBL

The active 305P MkII is worth considering if you want to compare positioning adjustments for use on a desk or near walls.

  • JBL lists Boundary EQ, HF Trim and balanced XLR and TRS inputs for this model.
  • The manufacturer describes these settings as helping to compensate for the surrounding environment; that doesn’t prove they’ll fix every issue in every room.

KRK

The active ROKIT 5 Generation Five is worth considering if you want to explore different listening modes and built-in calibration.

  • KRK lists Mix, Focus and Create modes, along with 25 combinations of positioning and equaliser adjustments.
  • These are features listed by KRK, not independent proof that a particular setting will improve the sound of percussion editing.

Joybuy products

Related products coming soon.

Frequently asked questions

Do the monitors need to stay at one fixed height when you sit and stand?

Not necessarily, but check both listening positions. Genelec recommends placing a stereo pair at the same height and aiming the acoustic axes towards your listening position. So also assess how changing ear height affects the sound image.

How should you start positioning and calibrating them?

Start with a symmetrical stereo setup, with both monitors facing your listening position. Genelec recommends a 60° angle between the monitors, with the listener at the point of an equilateral triangle, as an ideal starting point. Then check how your desk and walls affect the sound, and follow the manual for the settings on your exact model.

When is a subwoofer useful for percussion?

A subwoofer may be an option if you need to assess low-frequency information that the main monitors don’t reproduce sufficiently at your listening position. Adjust the placement, crossover, level and phase. Genelec notes that a position with maximum bass output doesn’t necessarily produce the flattest response.

What should you check for a complete setup?

Check whether the offer includes one monitor or a pair, and whether you need any cables, stands, a subwoofer or an external power amplifier. Also check that the inputs match the outputs on your audio interface.

What rules apply when buying online in the Netherlands?

According to the Dutch government, many online consumer contracts with a business come with a 14-day cooling-off period. This doesn’t automatically apply to every purchase, such as buying from a private seller. The European Commission explains that the Low Voltage Directive applies to equipment within the relevant voltage range of 50 to 1,000 V AC or 75 to 1,500 V DC. So the directive doesn’t automatically apply to every speaker or version.