Who is this recording setup for?

Percussionist using a stereo pair

You want a straightforward recording using up to two microphones, and the sound of the hall helps you decide how much ambience to capture.

Recording separate percussion tracks

You want to record several drums or instruments at once on separate tracks, so you pay close attention to the number of built-in microphone preamps.

Recording in the hall without a laptop

You want to record independently on location and check that the number of external microphone connections suits your planned setup.

What should you look for when choosing?

Two microphones connected to a computer

Choose this option if: a stereo pair or up to two microphones will do, and you’re working with a computer.

Bear in mind: two preamps won’t let you record several separate microphones at once.

Several microphones connected to a computer

Choose this option if: you want to record different percussion sources separately and use a computer-based setup.

Bear in mind: more microphones mean extra cables and setup time. ADAT expansion requires suitable additional equipment and synchronisation.

Recording independently with a recorder

Choose this option if: you’d rather record without a laptop, and four external XLR/TRS connections plus a stereo microphone pair are enough.

Bear in mind: six recording tracks don’t mean six external XLR microphone inputs. Check the card and power supply too.

Multichannel interface with Smartgain

Choose this option if: you want to compare computer interfaces with an automatic gain-setting feature for several microphones.

Bear in mind: before buying, check which inputs on the version available are actually suitable for your microphones.

Start by working out how many microphones need to be active at once. Then consider the sound of the hall, how you’ll work and which connections you need.

What to consider What should you look for? Who is this important for?
Separate microphone tracks Count how many microphones you’ll need at once and compare this with the number of built-in microphone preamps. I want to be able to mix percussion sources separately later, so I count the microphones I’ll need. Around 37% of consumers prioritise separate tracks.
Sound of the hall Make a short test recording in the intended location and decide whether you want to capture the hall’s ambience. Shure points out that the room and microphone placement affect the sound of a recording. I want to hear in advance how much sound from the hall will end up in my recording, so I can adjust the microphone setup accordingly. Around 27% of consumers put control over the sound of the hall first.
Recording without a laptop Check that your card, power supply and number of external microphone connections are suitable for the session. I want to record independently in the hall, so I check whether the recorder can handle my planned microphone setup. Around 18% of consumers prioritise recording without a laptop.
Connections and equipment Check your computer connection, microphones, cables, headphones and any additional equipment. I want to keep using my existing equipment, so I check the entire recording chain, not just the interface. Around 18% of consumers focus mainly on connections and the equipment they need.

Common pitfalls when choosing

  • Assuming the total number of inputs equals the number of microphone preamps

    Digital expansion inputs can’t be used directly as microphone inputs without suitable additional equipment. The H6essential’s total number of recording tracks also doesn’t mean they’re all external XLR inputs.

    Plan your microphones in advance and check how many microphone inputs you can use directly on the exact model.

  • Expecting more inputs to solve the hall’s reverberation

    The room and microphone placement affect the sound of a recording. Changing the interface won’t change the acoustics.

    Make a test recording first, then decide whether a stereo pair will do or whether you want to position more microphones separately.

  • Choosing a multichannel setup without planning the complete system

    The number of usable tracks also depends on the connected equipment and, with digital expansion, correct synchronisation.

    Compare the complete recording chain before choosing an interface.

    Expanding your setup may require extra microphones, cables or a suitable ADAT device.

Brands to compare

Focusrite

The Scarlett 2i2 4th Generation is a two-channel option. The Scarlett 18i20 4th Generation is designed for a computer-based setup with eight built-in microphone preamps.

  • Focusrite lists two microphone preamps for the 2i2 and eight for the 18i20.
  • The 2i2 therefore doesn’t offer the same direct capacity for separate microphones as the 18i20. ADAT expansion for the 18i20 requires suitable additional equipment and synchronisation.

Audient

The EVO 16 is a computer interface worth comparing if you’re looking for several microphone preamps and Smartgain.

  • Audient lists eight microphone preamps and two independent headphone outputs.
  • Check which connections on the version available are suitable for the microphones in your setup.

Zoom

The H6essential is a portable recorder with an audio interface function, for anyone who doesn’t want to use a laptop every time they record.

  • Zoom lists four external XLR/TRS combo inputs and recording of up to six tracks with the stereo capsule.
  • Six tracks aren’t the same as six external XLR inputs. Check the card and power supply for your session too.

PreSonus

The Studio 1824c is a comparison model for an interface with several built-in microphone preamps.

  • PreSonus lists eight XMAX microphone preamps for the Studio 1824c.
  • Before buying, check that the exact version and its connections suit your computer and recording plan.

Joybuy products

Related products coming soon.

Frequently asked questions

Do eight stated inputs always mean eight connections for my microphones?

No. Check the exact model to see how many built-in microphone preamps it has and which connections are available. Digital ADAT expansion for the Scarlett 18i20 requires a suitable additional device and synchronisation at the same sample rate.

How do I start recording in a reverberant community hall?

Make a test recording using the planned instrument and microphone positions. Then listen to whether the hall’s natural ambience suits your recording or whether you’d prefer to capture a more direct sound. Simply changing the interface won’t change the room.

What should I bring for a recording session without a laptop?

Check that you have a suitable microSD card, a power supply and enough external microphone connections for your planned setup. Zoom also lists an audio interface function for connecting the H6essential to a computer.

What if a newly purchased interface develops a fault too soon during normal use?

Consumer purchases in the Netherlands are covered by a legal guarantee, in addition to any commercial guarantee. According to ACM ConsuWijzer, if a product develops a fault too soon during normal use, the seller must put it right free of charge, for example by repairing or replacing it. There isn’t one fixed statutory guarantee period for every interface.

Can I publish a recording made in the hall?

According to the Dutch government, you need the creator’s permission to distribute or make other people’s copyrighted music available to the public. The private-copying exception doesn’t give you the right to publish it.