Who is this choice relevant to?

Editing existing percussion tracks

You’re not recording again and mainly want practical headphone and monitor connections, with controls within easy reach.

Recording percussion with multiple microphones

You want to record separate microphone tracks, so you’re counting how many microphone preamps are available at the same time.

Playing live while creating

You combine editing with overdubs and decide whether you want to hear the direct input signal or the sound processed by your DAW.

What should you look for when choosing?

Start with how you work: for existing tracks, monitoring connections and easy-to-reach controls matter more than extra microphone inputs; for new recordings, the number of microphones you use at the same time is key.

What to consider What should you check? Who is this important for?
Monitoring existing tracks Check the headphone and monitor outputs, and how you control their levels. If I mainly edit existing percussion using headphones or monitors, I want practical connections and easy volume control. Around 33% of consumers prioritise monitoring existing tracks.
Number of microphone recordings Count the microphone preamps, not just the total number of analogue inputs. If I want to record several microphones to separate tracks at the same time, the number of microphone channels needs to suit my setup. Around 25% of consumers prioritise the number of simultaneous microphone recordings.
Monitoring during overdubs Decide whether you want to hear the direct input signal or the sound with DAW effects; test the buffer setting in your own project. When playing live, I want to know whether I can monitor the dry signal or need to hear effects from my DAW. Around 25% of consumers make monitoring during overdubs their top priority.
Controls at a sit-stand desk Check that connections and controls are within reach, and plan the cable routing for both desk heights. If I switch between sitting and standing, I want to be able to reach the controls I use, and the cables need to work at both heights. Around 17% of consumers prioritise setup and accessibility.

Common mistakes when choosing

  • Assuming ‘four inputs’ means four microphone channels

    An interface can combine line and microphone inputs. The Focusrite Scarlett 4i4 4th Gen has four analogue inputs but two microphone preamps; according to Behringer, the Behringer UMC404HD has four microphone preamps.

    Write down how many microphones you want to record separately at the same time, then check the number of microphone preamps specifically.

  • Confusing direct monitoring with monitoring the full DAW mix

    Direct monitoring routes the live input signal outside the DAW. You won’t automatically hear effects that are processed by the DAW first through this route.

    Decide in advance whether you need a direct signal or DAW effects while playing.

  • Assuming you should always choose the smallest buffer setting

    Ableton explains that a smaller buffer can reduce latency, but it requires more processing power and can cause audio dropouts.

    Test the setting with your own percussion project and plug-ins rather than assuming there’s one setting that works for everything.

Brands and models to consider

Focusrite

Scarlett models vary in the number of microphone preamps and available inputs. Compare the specific model with your recording and monitoring needs.

  • According to Focusrite, the Scarlett 2i2 4th Gen has a dedicated headphone volume control.
  • On the Scarlett 2i2 4th Gen, connecting a jack to a front-panel line input disables the corresponding microphone input. The Scarlett 4i4 4th Gen has four analogue inputs, including two line inputs, but two microphone preamps; the Scarlett 18i20 4th Generation has eight.

Behringer

The UMC404HD is worth considering if you want to record four microphones separately at the same time.

  • Behringer specifies four microphone preamps, a direct monitor mix and a supplied power adapter.
  • Direct monitoring applies to the input signal; effects processed by the DAW first aren’t monitored through this direct route.

Audient

With eight microphone preamps, the EVO 16 is suited to larger setups using multiple microphones simultaneously.

  • Audient describes Smartgain as a feature that sets the input levels of eight channels at the same time.
  • Smartgain is a feature described by the manufacturer, not an independent measurement of the results. You won’t need eight preamps if you’re only editing existing tracks.

MOTU

The M4 combines two microphone, line or instrument inputs with two additional line inputs, four line outputs and a headphone output.

  • According to MOTU, the headphone and monitor volumes can be controlled separately, and the device has level meters.
  • The four analogue inputs aren’t four microphone preamps, so check how many microphones you can actually connect at the same time.

Joybuy products

Related products coming soon.

Frequently asked questions

Do you need extra microphone inputs if you’re only editing existing percussion tracks?

No, not for connecting tracks that have already been recorded. First, compare the outputs for your headphones or monitors. Microphone inputs matter when you want to record new sound sources yourself.

How can you reduce latency when playing percussion while editing?

If your interface supports it, direct monitoring can send the unprocessed input signal to your monitor mix without routing it through the DAW. If you want to hear DAW effects, check your driver, plug-ins and buffer setting. Ableton notes that a smaller buffer can reduce latency, but it also requires more processing power and can cause dropouts.

What should you check when using an audio interface at a sit-stand desk?

At both the lowest and highest desk settings, check that your headphone, USB and monitor cables can reach their connections and that you can operate the volume controls you use. Connections and controls vary by model, so plan where to place the interface and how to route the cables for your setup.

What rights do you have when shopping online in the Netherlands?

According to the Dutch government, when you buy from a business at a distance, you’re entitled to a 14-day cooling-off period in many cases, subject to applicable conditions and exceptions. The Netherlands also has a statutory guarantee with no fixed statutory time limit; if a product is faulty, the seller is your point of contact.

What should you look for when buying an interface from outside the EU?

The Dutch government warns that it may not always be clear whether an online shop outside the EU complies with European safety requirements. According to the Dutch government, electronic devices placed on the EU market must carry a CE mark. For a specific version, also check the product documentation and the power supply requirements.