Who is this guide for?

Editing percussion tracks

You edit existing recordings across two screens and want to listen back through speakers or headphones. Extra microphone inputs are mainly relevant if you also record new sources at the same time.

Recording multiple percussion tracks

You want to record several instruments or microphones at once, then edit each signal separately. In this case, the number of built-in mic preamps matters more than the total number of inputs and outputs alone.

Producing with external equipment

You use equipment such as a mixer, line-level sources or digital gear alongside your computer. So look beyond microphone inputs and check that the connections and routing suit your setup.

What should you look for?

First decide whether you’ll be listening back to existing tracks or recording several microphones at once. Then check the monitoring options and connections your workspace needs.

What matters when buying What should you check? Who is this for?
Listening back to existing tracks Check the connections for your speakers and headphones, and make sure they’re compatible with your computer. If I’m editing existing percussion, I want to connect my speakers and headphones properly without choosing unnecessary recording channels. Around 33% of consumers make monitoring their main buying priority.
Recording several microphones at once Count the microphones you’ll use at the same time and compare that number with the built-in mic preamps. If I want to record several percussion instruments separately, I need enough direct microphone inputs. Around 27% of consumers prioritise recording with multiple microphones at once.
Latency while playing Decide whether you need to listen through DAW effects or want to monitor directly, and check the features of the exact model. If I’m playing along while recording, I want the timing between my playing and the sound to feel natural. Around 20% of consumers put monitoring latency at the top of their list.
Existing equipment and expansion List the line, MIDI and digital connections you need. For ADAT, check the channel count at your chosen sample rate. If I want to connect a mixer or digital equipment, the interface needs to suit my existing setup. Around 20% of consumers make equipment connections or expandability their main priority.

Common selection mistakes

  • Confusing two computer screens with two audio outputs

    Support for two computer screens depends on your computer’s video outputs and display support, not on the number of audio outputs on the interface.

    Check your computer’s display support and video cables separately. Choose audio outputs to suit your speakers, headphones and any external audio equipment.

  • Mistaking the total number of inputs for the number of microphone inputs

    According to MOTU, the MOTU 828 has two built-in mic/line combo inputs, alongside line and digital connections. So the total I/O count doesn’t tell you how many microphones you can connect directly.

    Count the built-in mic preamps, line inputs and digital channels separately for your recording setup.

    Additional microphones may require external preamps and suitable connections.

  • Counting ADAT channels without considering the sample rate

    Focusrite lists all 16 ADAT channels for the Scarlett 18i20 4th Gen at 44,1 and 48 kHz; the number available depends on the configuration.

    Check how many ADAT channels are supported at the sample rate and in the setup you plan to use.

Brands to compare

Focusrite

The Scarlett range includes models for monitoring and modest recording, as well as the Scarlett 18i20 4th Gen for recording with more microphones at once.

  • According to the official specifications, the Scarlett 2i2 4th Gen has two analogue inputs, while the Scarlett 18i20 4th Gen has eight built-in mic/line preamps.
  • The Scarlett 18i20’s extra ADAT channels require a suitable digital setup. The number available depends on the sample rate.

PreSonus

The Studio 1824c is worth considering if you want to connect several microphones directly to record separate percussion tracks.

  • PreSonus specifies eight built-in mic preamps and ADAT expansion.

MOTU

The 828 is designed for setups with line-level sources, digital equipment and extensive routing.

  • MOTU specifies two built-in mic/line combo inputs, eight TRS line inputs and two ADAT banks.
  • The total I/O count isn’t the same as the number of built-in mic preamps.

RME

The Fireface UCX II is an option for a compact setup with external equipment and extensive routing.

  • RME describes TotalMix routing, ADAT and standalone recording to USB storage.
  • According to RME, the UCX II has two built-in mic/line preamps. You’ll need extra preamps to connect more microphones directly.

Arturia

The MiniFuse 2 is a compact option for monitoring and modest recording, with MIDI connections.

  • Arturia specifies two inputs, two outputs, a headphone socket and MIDI I/O.
  • This model isn’t designed to record more than two separate analogue sources directly at the same time.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I connect my two computer screens to the audio interface?

No. Your computer needs suitable video connections and display support for the screens; the audio interface handles audio connections. Check Apple Support or your computer’s documentation to see how many screens your exact model supports.

How do I connect speakers and headphones?

Compare the outputs on the exact interface model with the inputs on your speakers, and use suitable cables. According to Arturia, the MiniFuse 2 has speaker outputs and a headphone output with its own volume control.

What can I do if I hear latency while playing?

A lower buffer setting can reduce latency when monitoring through software, but it requires more processing power and may cause audio dropouts. Ableton describes direct monitoring as a way to listen to the input signal directly. If you use this option, make sure you’re not also monitoring the same signal through the recording track.

What warranty and cooling-off period apply to an online purchase in the Netherlands?

If there’s a problem with a consumer product, the seller is your point of contact for the statutory warranty, according to Rijksoverheid. For a standard online product purchase, you usually have 14 days from delivery to change your mind, subject to legal exceptions; ACM ConsuWijzer explains the cooling-off period. Check whether an exception applies to your purchase.

What does a CE mark tell you about an audio interface?

A CE mark isn’t a quality mark and doesn’t prove that an interface is right for your recording needs. Business.gov.nl outlines the relevant European rules for electrical and electronic equipment; also check the documentation for the specific product.