Who is this relevant to?

Student mixing quietly

You mainly edit existing percussion tracks using headphones. Focusrite Support explains that computers may already have a built-in audio interface, so first check that your current connection works with your headphones and software.

Creator recording small overdubs

You want to record one or two microphones at the same time as editing, and hear yourself as you do so. Focusrite Support describes direct monitoring as a way to send the input signal straight to a headphone or line output.

Recording multiple drum tracks

You want to capture different parts of a percussion setup simultaneously on separate tracks. To do this, count the suitable microphone inputs, not just the total number of inputs and outputs.

What should you look for?

First decide whether you’re only editing existing tracks or recording new sound sources too. If you plan to record, choose based on the number of sources you’ll record simultaneously and how you want to monitor the sound while playing.

What to consider What should you check? Who is this important to?
Listening back quietly Check the headphone socket, output and any separate volume control. Also check that the connection works with your computer. If you mainly edit existing tracks using headphones, you’ll want a simple setup that lets you listen back comfortably. Around 40% of consumers prioritise listening back quietly.
Separate percussion tracks Count how many microphones you want to use at the same time and check the number of microphone preamps. If needed, also check for phantom power and the power supply included. If you want to record several microphones at once, the number of suitable inputs determines your setup. Around 30% of consumers prioritise the number of separate recording sources.
Latency while playing Check whether you can use direct monitoring and whether your DAW buffer setting suits the way you work. Avoid hearing the same signal twice through direct and software monitoring. When playing live or recording overdubs, you’ll want to hear the input signal without unnecessary delay. Around 20% of consumers prioritise monitoring while playing.
Avoiding recording features you won’t use Before choosing extra inputs, make a note of the connections you need now and the recordings you actually plan to make. If you only edit existing files, you won’t want to pay for recording features you won’t use. Around 10% of consumers prioritise avoiding an unnecessary hardware purchase.

Common buying mistakes

  • Assuming editing always requires a separate interface

    A computer may already have a built-in audio output for listening to existing tracks. You don’t automatically need an extra device if your current headphone and software setup works.

    Test your existing connection first. Only buy an interface if there’s a feature or connection you’re missing.

  • Assuming four inputs means four microphone preamps

    Focusrite specifies two microphone preamps for the Scarlett 4i4 4th Generation. So the total number of inputs and outputs alone doesn’t tell you how many microphones you can connect directly at the same time.

    Count the microphones you want to record simultaneously, then check the number of suitable microphone preamps for each model.

  • Thinking direct monitoring solves all DAW latency

    Direct monitoring sends the input signal straight to the headphone or line output. It doesn’t eliminate latency caused by software monitoring or DAW effects.

    Choose between direct and software monitoring, check your DAW’s buffer setting and avoid monitoring the same signal twice.

Brands to consider

Focusrite

The Scarlett range includes compact models such as the 2i2 4th Gen, as well as the 18i20 4th Gen for setups with more microphone sources.

  • Focusrite specifies two microphone preamps for the Scarlett 2i2 4th Gen and eight for the Scarlett 18i20 4th Gen.
  • The Scarlett 4i4 4th Gen is marketed as a four-in/four-out interface, but Focusrite specifies two microphone preamps. Check which inputs suit your recording plans.

Audient

The EVO 4 is a two-in/two-out option for small overdubs, with up to two simultaneous inputs.

  • Audient describes Smartgain as automatic level setting.
  • The description of Smartgain is the manufacturer’s claim about how it works, not an independent comparison. You’ll need a different setup to record four separate microphones.

MOTU

The M2 is a two-in/two-out option worth comparing if physical controls, a headphone output and visible level meters are important to you.

  • MOTU specifies two combo inputs, a headphone output and input and output meters.
  • MOTU’s stated low latency doesn’t guarantee the same results on every computer or with every DAW setting.

Behringer

The UMC404HD is worth considering if you want to record four microphones simultaneously on separate percussion tracks.

  • Behringer specifies four microphone preamps and an included mains adapter.
  • The extra inputs may go unused if you’re only editing existing tracks.

Steinberg

The UR22C is a compact two-in/two-out option if MIDI connections or the monitor mix function matter for your setup.

  • Steinberg lists MIDI in/out and monitor mix among the UR22C’s features.
  • Check that it’s compatible with your computer and software; two inputs aren’t enough for four separate drum microphones.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need an audio interface to edit and mix existing percussion?

Not necessarily. Focusrite Support explains that a computer may already have a built-in audio output. First, check whether your current headphones and software work with it. A separate interface is most useful if you need different connections, controls or recording inputs.

Why can I hear myself twice during an overdub?

This can happen if direct and software monitoring are both switched on: you’ll hear the direct signal as well as a delayed version through the DAW. Focusrite Support recommends switching off unwanted software monitoring for that recording source.

Can I record four drum microphones separately with a Scarlett 4i4?

Not directly using four built-in microphone preamps: Focusrite specifies two microphone preamps for the Scarlett 4i4 4th Generation. Recording four microphone sources at the same time requires four suitable microphone inputs or a demonstrably suitable additional setup.

Who can help if an audio interface bought in the Netherlands turns out to be faulty?

According to the Dutch government, the retailer is your point of contact for a solution if a product is faulty. There’s no fixed statutory two-year guarantee period in the Netherlands; what you can expect from a product depends on the product and the circumstances. Any additional guarantee is separate from this.

Does a CE mark mean an audio interface sounds good?

No. Business.gov.nl explains that CE marking is not a quality mark. The relevant European regulations must be identified and followed for each specific electrical or electronic product; a model name alone doesn’t confirm this.