Student who prints photos
Wants to assess colours and tones before printing, and can use a calibrated screen and the correct output profile to do so. Adobe describes monitor calibration as part of colour management in Lightroom Classic.
When choosing a pen display for photo prints, don’t base your decision on the stated colour gamut alone. Adobe recommends calibrating your monitor, and BenQ Color Technology Lab points out that soft-proofing also requires stable lighting conditions. Then weigh up pen controls, desk space and how the display connects to your computer. A more compact screen takes up less desk space, while a larger or higher-resolution screen may give you more room for your photo and tool panels. None of these features, on its own, guarantees an accurate print.
Wants to assess colours and tones before printing, and can use a calibrated screen and the correct output profile to do so. Adobe describes monitor calibration as part of colour management in Lightroom Classic.
Works with local adjustments or masks and wants to use the pen directly on the image. Wacom explains how creative software can recognise a connected pen input device.
Also uses the desk for study materials, or needs to put the screen away after editing. Screen size, stand and cabling are therefore all worth considering.
A good fit if: you also use your desk for studying and mainly make local retouches with the pen. Wacom lists a 13.3-inch screen for the Movink 13.
Trade-off: a smaller workspace leaves less room to view the photo and tool panels at the same time.
A good fit if: both colour checking and on-screen retouching matter to you. XPPen lists a typical 99% Adobe RGB for the Artist Pro 16 (ID160F-E); Xencelabs lists 98% Adobe RGB for the Pen Display 16 Bundle.
Trade-off: these manufacturers’ specifications are not print accuracy measurements made under the same conditions. The stated connections also differ: the XPPen manual describes a 3-in-1 cable and the possibility of extra power, while the stated single-cable connection for Xencelabs requires USB-C Alt Mode.
A good fit if: you want more pixels or vertical space for cropping and retouching. Huion lists QHD for the Kamvas Pro 16 (2.5K); GAOMON lists 2560 × 1600 pixels and a 16:10 aspect ratio for the PD1610.
Trade-off: the stated sRGB percentages for these models are not the same as measured Adobe RGB coverage, and don’t prove print accuracy.
| What to consider | What should you look for? | Who should pay extra attention? |
|---|---|---|
| Colour checking for prints | Check the calibration options for the exact model and which output profile suits your printing method. | If I want to assess colours before printing, I need to be able to calibrate my screen and use the correct output profile. Around 33% of consumers prioritise colour checking for prints. |
| Direct pen retouching | Check that the pen, driver and shortcut keys suit your software and workflow. | For local adjustments and masks, I want to use the pen directly on the photo, provided my software supports the pen features I need. Around 27% of consumers prioritise direct pen retouching. |
| Desk space | Compare the physical dimensions and stand. Also consider resolution and aspect ratio if you need to see the photo and panels at the same time. | If I want to use my desk for studying again after editing, the space taken up by the screen matters a lot. Around 20% of consumers prioritise a workspace that can be used for both tasks. |
| Connection and setup | Check the computer port, video signal, power requirements, driver and included cables for the exact model. | Before considering any other benefits, I want to know whether the display works with my computer and which cables or power supply the setup requires. Around 20% of consumers prioritise compatible connections. |
A screen specification alone doesn’t tell you how the combination of screen settings, output profile, paper and viewing light will look. According to BenQ Color Technology Lab, soft-proofing only works well when key lighting conditions are stable.
Check the calibration and suitable output profile before relying on what you see on screen.
Colour management can take extra time and may also involve making proof prints.
Connection requirements vary by model. The single-cable connection listed by Xencelabs requires USB-C Alt Mode; the XPPen Artist Pro 16 manual describes a 3-in-1 cable and the possibility of extra power.
Compare your computer’s ports and power options with the manual and the cables supplied with the exact model.
Depending on your computer and chosen setup, the cabling or power supply may take up extra space.
With a screenless tablet, you look at a separate monitor while retouching. This is a different way of working from editing directly on the photo.
Check that the product description clearly states that it has a built-in screen.
The Artist Pro 16 (ID160F-E) is a mid-sized model for pen-based retouching. XPPen lists a resolution of 1920 × 1080 and a typical 99% Adobe RGB.
According to Xencelabs, the Pen Display 16 Bundle combines a 16-inch 4K OLED screen with preset colour spaces, including Adobe RGB.
According to Huion, the Kamvas Pro 16 (2.5K) is a 15.8-inch model with QHD resolution.
According to Wacom, the Movink 13 is a compact 13.3-inch OLED option with factory calibration and a single-cable connection.
According to GAOMON, the PD1610 has a 16-inch screen, 2560 × 1600 pixels and a 16:10 aspect ratio.
No. Check the specification for the exact model, calibrate the screen and use the right profile for your chosen output. Also keep the lighting as consistent as possible when assessing the screen and print.
Check the video capabilities of the port, available power, cables and driver for the exact model. The single-cable connection listed by Xencelabs requires USB-C Alt Mode; the XPPen Artist Pro 16 manual describes a 3-in-1 cable and the possibility of extra power.
Check the screen calibration and the profile for your chosen output again whenever your printing method or viewing conditions change. Don’t assess a soft proof under strongly changing ambient light.
You don’t need an extra warranty to have statutory rights. According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; if a product is faulty, the retailer is your point of contact. If you’re considering a paid extra warranty, compare the rights it actually adds.
According to Ondernemersplein, businesses placing electrical or electronic equipment on the market must ensure it complies with the applicable European rules. CE marking is compulsory for certain product groups. Check the information for the product and listing; a general product description doesn’t confirm that an individual item complies.