Who are these pedals for?

Drivers practising their braking points

If you want to practise braking repeatedly and turning into corners on short oval circuits, an adjustable brake and careful calibration are important. iRacing publishes information about oval racing and setting up controllers.

Drivers with a compact cockpit

When footwell space is limited, it’s important that the throttle and brake fit on the plate and that the setup stays stable. The Heusinkveld manual specifies a very rigid base for Sprint pedals.

Drivers with an existing wheel

Check that the pedals work with your PC, or with the combination of wheel and wheel base you use on your console. A standalone USB connection doesn’t automatically mean the set will also work directly with a console.

What should you look for when choosing?

Two-pedal set

Best suited if: you mainly use the throttle and brake and want to leave more room for your feet.

Trade-off: check the connection to your PC and, if it has a load cell brake, whether your pedal plate is sturdy enough.

Three-pedal set

Best suited if: you use the clutch or need a set with three pedals.

Trade-off: the extra pedal takes up space; if you’re using a console, also check which wheel base is required.

Keep or upgrade your existing pedals

Best suited if: your current pedals are stable and you want to practise your braking points first, or add a load cell brake later as a targeted upgrade.

Trade-off: check that the upgrade is compatible with your exact set, and recalibrate the pedals after making a change.

Buying concern What to look for Who is this important for?
Consistent braking Check the sensor type and available settings; recalibrate after making a change. If I want to practise braking points on short oval circuits, I need to be able to adjust and repeat the brake response. Around 29% of consumers give brake modulation top priority.
Fit and stability Measure the width and depth, and check the bolt pattern; make sure the plate doesn’t move when you brake. With limited space, I need to know whether the pedals will fit and the mounting will stay secure when I brake. Around 29% of consumers prioritise fit and stable mounting.
Compatibility Check the exact pedal and wheel base models, the connection and game support. If I want to use my existing PC or console, the complete setup needs to work with it. Around 24% of consumers give compatibility top priority.
Complete setup Check what’s included in the set and whether you need a baseplate, adapter or expansion kit. I want to know in advance which parts I’ll need for mounting and any potential upgrades. Around 18% of consumers prioritise the complete setup and upgrade options.

Common buying mistakes

  • Confusing a sensor rating with the foot pressure required

    A load cell’s measurement range and the force you actually apply to the brake pedal are two different specifications.

    Compare the brake settings and feel, and when checking figures, make sure you know exactly what force they refer to.

  • Mounting a load cell set on a flexible pedal plate

    A moving base can make it difficult to apply the brake consistently. The Heusinkveld manual specifies a very rigid base for Sprint.

    First check the plate, bolt pattern and mounting points. Make sure you have a suitably solid mount before increasing the brake force.

    Sprint may require a suitable separate baseplate if your current mounting base isn’t up to the job.

  • Treating CSL Pedals and CSL Pedals LC as the same set

    The CSL Pedals LC bundle includes a separate Load Cell Kit; the standard CSL brake isn’t the same as a load cell brake.

    Check the exact bundle contents and whether you plan to connect the pedals to a PC via USB or through a compatible Fanatec wheel base.

  • Relying on the name MOZA SR-P alone

    The product name alone doesn’t tell you which version or sensor specifications apply to the set on offer.

    Check the full model name and the specifications of the exact version before comparing it with another set.

Brands to compare

MOZA Racing

The manufacturer describes the SR-P as a two-pedal set with a direct USB connection for PC and adjustable pedal spacing.

  • The pedal spacing is adjustable, which can help you arrange a compact pedal plate.
  • Check the sensor specifications for the exact version; don’t assume every set called SR-P has the same rating.
  • According to MOZA Racing, SR-P and SR-P Lite parts are not compatible with each other.

Heusinkveld

Heusinkveld offers Sprint as a two-pedal set designed for mounting on a full frame, with mechanical and software adjustments.

  • The manufacturer specifies a maximum actual braking force of 65 kg and a wide range of adjustment options.
  • The manual requires a very rigid base. The stated braking force is not the same as the load cell’s measurement range.

Thrustmaster

The T-LCM is a three-pedal set with a load cell brake and adjustable springs, pedal height, angle and spacing.

  • Each of the three pedals can be adjusted independently.
  • The manufacturer lists PC and consoles as supported platforms; for console use, check that the complete setup is compatible with your wheel base.
  • A fixed three-pedal set takes up more space than a two-pedal layout.

Sim-Lab

The XP1 is designed for drivers who want to adjust settings such as brake resistance, preload and pedal angle.

  • Sim-Lab lists different springs and elastomers, as well as software settings for brake curves and dead zones.
  • The manufacturer distinguishes between a 200 kg load cell design and a maximum of 100 kg of pressure on the brake pedal; measure your cockpit to check the fit.

Fanatec

CSL Pedals LC is a three-pedal bundle with a separate Load Cell Kit.

  • According to Fanatec, CSL Pedals LC works independently via USB on PC.
  • A compatible Fanatec wheel base is required for console use. Also check that your chosen bundle includes the load cell kit.

Products on Joybuy

Related products coming soon.

Frequently asked questions

Do I always need a clutch to practise oval racing?

No, not just because you’re racing on ovals. Choose your pedal layout based on the cars and controls you use in the game; a two-pedal set is enough if you don’t use the clutch. In a compact cockpit, this layout takes up one less pedal position.

How do I set up a new load cell brake in iRacing?

Calibrate the pedals in iRacing and check the pedal manufacturer’s settings. The iRacing Support instructions dated 9 September 2025 recommend a Brake Force Factor of 0.00 for load cell pedals, compared with 1.60–2.00 for the position-based pedals mentioned in those instructions.

Can I use standalone USB pedals with a console without any extra checks?

No, check that your complete setup is compatible. MOZA describes the SR-P as a standalone USB set for PC; Fanatec states that CSL Pedals LC can be used with a console via a compatible Fanatec wheel base. For Thrustmaster, also check the specific combination of pedals and wheel base.

What should I do if my pedal plate flexes when I brake?

Check the mounting and the rigidity of the base before increasing the brake force. The Heusinkveld manual specifies a very rigid mounting base for Sprint, such as a thick metal plate with drilled holes or a suitable baseplate.