Good outdoor lighting needs to do more than look attractive. A light by the front door needs to provide enough illumination, a solar garden light needs to be positioned in the right place, and an outdoor wall light needs to withstand the conditions it will be used in. Yet purchases often go wrong because of unclear claims and unrealistic expectations.
A high lumen count sounds appealing, but it doesn’t tell you how the light is distributed. A light with a narrow beam can illuminate a smaller area more brightly than one with the same output and a wider spread. So check the beam angle, whether the lamp head can be adjusted and where you plan to install the light.
A powerful LED outdoor light with wide coverage can be practical for a driveway or large garden. For a balcony or patio, a softer light source is often more comfortable.
An IP44 outdoor light is protected against splashing water, but it isn’t designed to withstand direct jets of water or immersion. An IP65 outdoor light offers greater protection against dust and water jets. This makes IP65 more suitable for exposed locations, but the installation and connection still matter.
Also consider the difference between a solar outdoor light and one that runs on mains electricity. A 230-volt outdoor wall light must be connected by a qualified installer if fixed wiring is required.
Solar outdoor lighting relies on daylight. A panel beneath a roof, between tall buildings or in deep shade will charge less efficiently. Cloud cover, dirt on the panel and the sun’s position can also affect how long the light stays on.
A solar garden light is therefore best suited to a spot where the panel receives direct sunlight, or daylight for a sufficient part of the day. Also check whether the light has a fixed setting, a motion sensor or several modes. More features don’t automatically mean a longer run time.
Colour temperature is measured in kelvin (K):
Consider how you’ll use the light when checking its lumen output. Decorative lighting needs fewer lumens. For a driveway, garage or dark corner, a light with a motion sensor and higher output may be a better choice.
The IP code consists of two digits. The first relates, among other things, to protection against solid particles; the second relates to water.
An IP rating doesn’t automatically make a light suitable for every location. Cable connections, screws and the wall you’re mounting it on must also be suitable for outdoor use.
A solar outdoor light doesn’t need to be connected to the mains, but the solar panel does need to be positioned well. Clean the panel and sensor regularly with a soft, slightly damp cloth. For fixed façade lighting, consider the wiring, the surface and the manufacturer’s instructions.
Check whether the light source can be replaced, too. Some models have an integrated LED that can’t be replaced by the user. Other outdoor wall lights use an E27 or GU10 fitting, so you can choose a suitable LED bulb yourself.
Why it suits this profile: A wireless solar outdoor light for an entrance, balcony or small patio. It has a motion sensor, two lighting modes and an output of 400 lumens per light.
The description clearly specifies IP44, two modes and a sensor. Bear in mind that it should be installed away from direct water jets.
Solar-powered, with a motion sensor and 400 lumens; no fixed wiring required.
Why it suits this profile: For a driveway, wide façade or large patio where powerful, focused lighting is needed.
The product specifications state an output of 4000 lumens, an IP65 rating and sensor ranges of 8 metres when approached head-on and 16 metres from the side.
4000 lumens, IP65, an adjustable light head and solar power.
Why it suits this profile: For large gardens, garages, back paths and driveways where wide light coverage and motion detection are useful.
The listed specifications include 3000 lumens, three lighting modes, IP65 and a 180-degree detection angle. The actual run time will still depend on sunlight and use.
Three adjustable heads, 3000 lumens, IP65 and a stated detection range of 60 feet.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the applicable European safety regulations.
Choose a spot where the solar panel receives as much direct daylight as possible. Don’t place it beneath a roof edge or behind a dense tree. After installation, check that the light illuminates the area you want, and avoid pointing a motion sensor directly at a busy pavement, as this could cause it to switch on unnecessarily.
IP44 is suitable for many sheltered outdoor locations, such as a covered veranda, balcony or façade beneath a roof edge. This rating doesn’t mean the light can withstand immersion or direct water jets. For an exposed location, an IP65 outdoor light may be more suitable, depending on the installation instructions.
A solar outdoor light charges using sunlight during the day and doesn’t need to be connected to the mains. This means its electricity costs are effectively zero during normal use. Performance does depend on sunlight, battery capacity, temperature, dirt on the panel and how often the sensor activates the light. So, alongside the price, check the battery details, lighting modes and maintenance instructions.