An outdoor wall light can make a dark entrance, exterior wall, balcony or patio much more practical straight away. However, an attractive fitting isn’t necessarily right for the spot where you want to install it. In the Netherlands, a light on an exposed wall has to cope with rain, wind, damp and limited sunlight in winter.
The most common buying mistakes come down to three pitfalls:
Read on to find out which specifications matter and which models suit different uses.
For many sheltered outdoor spaces, an IP44 outdoor light is a practical choice. The first 4 indicates protection against solid objects larger than 1 millimetre; the second 4 indicates protection against splashing water from different directions.
That doesn’t mean every IP44 light is suitable for a completely exposed wall. Ideally, don’t install one where water is likely to collect or where it could be hit by a pressure washer. Also check that the mounting plate sits flush against the wall.
With an LED outdoor wall light that has an integrated light source, the LED usually can’t be replaced by the user. With a fitting that has a GU10 or E27 socket, you can choose and replace the bulb separately.
Brightness is measured in lumens:
Colour temperature is measured in kelvin. Warm white light between 2700 and 3000 K looks softer and suits a classic or atmospheric garden. At around 4000 K, the light looks more neutral and functional. Don’t just consider the figure: think about how the light is distributed, too. A downward beam lights a path directly, while diffuse light spreads further around the fitting.
A solar outdoor light doesn’t need a fixed power supply. That’s handy for a rented home, balcony or somewhere that’s difficult to run cables to. However, performance depends on how much direct sunlight it gets. A north-facing wall, canopy or shade from trees can limit charging time.
An outdoor light with a motion sensor switches on automatically when it detects movement. Check whether the sensor detects movement only or also has a dusk sensor. Some models let you choose between automatic operation and continuous light.
A hard-wired wall light, such as an outdoor GU10 light or E27 fitting, must be connected by a qualified installer, in accordance with the product information. Switch off the power before carrying out any maintenance or installation.
Why it suits this buyer: This compact black light works without fixed wiring and can be easily removed for charging thanks to its magnetic mount. The integrated sensor and 300 lumens make it suitable for an entrance, balcony or sheltered patio.
The product information clearly lists an integrated battery, USB connection, motion sensor and IP44 protection. Bear in mind, though, that IP44 means splash-resistant, not waterproof.
Integrated LED, 300 lm, warm white 3000 K, magnetic mounting and no fixed power cable required.
Why it suits this buyer: If you’re looking for a permanent, modern outdoor light for an exterior wall or balcony, this fitting offers integrated LED lighting with 800 lumens and warm white light at 2700 K.
The specifications list both the brightness and the IP44 rating. The light isn’t designed to be waterproof, and the integrated LED can’t be replaced by the user.
Aluminium and plastic, 800 lm, 2700 K and a compact round design. Hard-wired installation by a qualified installer is required.
Why it suits this buyer: This solar outdoor light is designed for places where bright, functional lighting is needed, such as by a driveway, back door or access path. According to the product information, the model has a motion sensor and dusk function.
The stated 1,000 lumens makes it easy to check the brightness. As this is a solar-powered light, it needs to be installed somewhere with enough direct sunlight; in a shady spot, the run time may be shorter.
1,000 lm, 3000 K, integrated LED, motion sensor, dusk function and no mains connection required.
Why it suits this buyer: This black solar outdoor light is suitable for a balcony, garden or entrance without a mains connection. Its two lighting modes let you choose between automatic operation and continuous light.
The product information lists 400 lumens, 2700 K and IP44. Don’t install the light somewhere that stays dark, and keep the solar panel clear of dirt and obstructions.
400 lm, warm white 2700 K, integrated LED, motion sensor and wire-free installation.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the applicable European safety regulations.
IP44 protects against splashing water and is often used for outdoor lighting on exterior walls, balconies or covered patios. The rating doesn’t mean the light is waterproof. Check where you plan to install it, and avoid direct water jets or immersion.
Lifespan varies by model and conditions of use. For models with integrated LEDs, the stated lifespan is listed in the product specifications. A GU10 or E27 fitting has the practical advantage that you can replace the LED bulb separately. Clean the light with a soft, dry cloth and check the fixings regularly.
A solar-powered outdoor light doesn’t use electricity from the mains while it’s switched on. Its battery charges during the day via the solar panel. The actual run time depends on sunlight, the season, temperature, battery condition and how often the motion sensor is activated. So check where you can install it before choosing a solar light.