An outdoor wall light can make a dark entrance, façade or veranda more functional. However, many people buy a light based on appearance without checking whether the fitting, brightness and protection are suitable for the location. As a result, the light may turn out to be too dim, difficult to maintain or unsuitable for a façade that is directly exposed to rain.
The three most common pitfalls:
The IP code indicates how well an enclosure is protected against dust and moisture.
An IP rating does not automatically make a product suitable for every situation. Also check the installation instructions and ensure that all connections are properly sealed.
An LED outdoor wall light with an integrated LED is ready to use straight away, but the light source usually cannot be replaced by the user. With a light that has a fitting, you can choose the light source yourself:
As well as colour temperature, pay attention to lumens. Around 180 to 400 lumens is suitable for orientation or ambient lighting. A wider entrance or security lighting may require a higher light output.
A solar outdoor wall light does not require a mains connection. This makes installation easier, but the solar panel must receive enough direct daylight. Shade from a roof edge, tree or neighbouring façade can limit charging performance, especially during darker periods.
An outdoor wall light with a motion sensor switches on automatically when movement is detected. Pay attention to:
A fixed outdoor wall light connected to 230 volts will usually require wiring. Have mains electrical work carried out in accordance with the applicable regulations; if in doubt, it is advisable to use a qualified installer.
Why it suits this profile: This solar outdoor wall light works without fixed wiring and has an integrated 400-lumen LED, a motion sensor and two lighting modes. It is well suited to a balcony, shed or entrance where quick installation is important.
The specifications clearly state IP44, the sensor and the requirement for positioning in direct sunlight. Bear in mind that IP44 provides protection against splashing water and is not intended for immersion.
Solar power, two modes, motion sensor and warm white light at 2700K.
Why it suits this profile: With 4000 lumens, IP65 protection, a motion sensor and an adjustable light head, this model is designed for a driveway, large façade or another location where a powerful beam is required.
The light output and IP65 rating are clearly specified. However, the light needs direct sunlight for charging, so check the installation location beforehand.
4000 lumens, IP65, adjustable head and a specified detection range of up to 8 metres when approached directly.
Why it suits this profile: This fixed outdoor wall light has a replaceable GU10 light source and an aluminium housing. This gives you the flexibility to choose the colour temperature, brightness or smart GU10 bulb yourself.
The fitting is clearly stated and the light source is not included. This means you can order a suitable GU10 LED bulb with your preferred specifications in advance.
GU10 fitting, replaceable light source, aluminium construction and IP44 rating.
Why it suits this profile: The lantern design, featuring metal, glass and an E27 fitting, complements a traditional home, veranda or patio. You can choose a suitable LED bulb for ambient or practical lighting.
The E27 fitting and the fact that no bulb is included are clear in advance. IP44 makes the light suitable for sheltered outdoor locations, but not for direct water jets.
E27 fitting, maximum 60 watts per light point, classic design and dimming capability when used with a suitable bulb and dimmer.
We have put together a complete, up-to-date list of products that fully meet these strict selection criteria and the applicable European safety regulations.
First, check that the wall is suitable for the weight and use plugs designed for brick, concrete or another substrate. With a fixed light, the circuit must be switched off before you work on the wiring. If in doubt, have a mains-powered light installed by a qualified electrician.
Keep the solar panel free from leaves and dirt. Clean light housings with a soft, dry cloth and do not use harsh cleaning products. With magnetic or freestanding installations, regularly check that the fixing is still secure.
It depends on the location. IP44 is suitable for splashing water and many sheltered outdoor areas, such as a veranda, balcony or entrance beneath an overhang. For a completely exposed façade or a location with a lot of dust and water jets, an IP65 outdoor light may be a better fit.
A solar outdoor wall light does not use mains electricity during normal operation. The battery is charged via the solar panel during the day. The amount of light and operating time depend on sunlight, the season, shade and the battery status.
Lifespan varies depending on the model and operating conditions. Integrated LED models sometimes state an expected lifespan, but the actual duration also depends on heat dissipation, moisture and the power supply. With a GU10 or E27 model, you can replace the light source without replacing the entire fitting.