An outdoor wall light with a motion sensor can be useful by the front door, garage, shed, garden or driveway. The light switches on when movement is detected, so you do not have to look for your key in the dark. However, not every model is suitable for every wall or outdoor location.
Pay particular attention to these three common pitfalls:
Below, you will find the specifications to check and the models suited to different situations.
An outdoor solar light with a motion sensor does not need a fixed power connection. This makes installation by a garden wall, shed or rented property easier. However, the light must be installed where the panel receives direct or sufficient sunlight. Clean the solar panel regularly with a soft cloth.
A wireless outdoor light with an integrated rechargeable battery works in a similar way, but you need to charge it manually, for example via USB-C. This is practical in areas with little sunlight, but you will need to allow for charging.
A 230 volt model is less dependent on weather conditions and daylight. For permanent outdoor lighting, such as by an entrance or on a wall, this can provide a consistent solution. The Brilliant Todd, for example, has an E27 fitting and, according to the product information, must be connected by a qualified electrician.
Light output is measured in lumens. A modest light output may be sufficient for a balcony or a path to the front door. A wider driveway or back garden requires more light.
Colour temperature is measured in kelvin:
A warm LED outdoor wall light is often a good choice for an entrance or patio. For practical lighting on a driveway, a brighter model may be more suitable. Also check whether the LED is integrated. With an integrated light source, you cannot replace the bulb yourself as you can with an E27 bulb.
The IP code indicates how well a light is protected against solid particles and moisture. An IP44 outdoor light is protected against splashing water and is suitable for many sheltered outdoor locations. Do not install the light where it will be continually exposed to powerful jets of water.
An IP65 outdoor light offers greater protection against dust and water jets. This can be useful on an exposed wall or in demanding conditions. Also check the installation surface, the supplied fixings and the wall’s maximum load capacity.
When assessing the motion sensor, look at:
An outdoor light with a dusk sensor responds to ambient light levels. A motion sensor responds to movement. Some models combine both functions.
Why it suits this profile: This compact solar wall light is suitable for an entrance, balcony or small garden where there is no power connection. The light produces 180 lumens and has a warm colour temperature of 2700 K.
The product information clearly states the low light output and IP44 rating. This makes it easier to see that the model is mainly intended for limited, sheltered applications.
Solar power, motion sensor, dimmable function and dimensions of 11.5 × 10 × 11 cm.
Why it suits this profile: The Philips Fyns combines solar power with 1000 lumens, a motion sensor and two lighting modes. This suits users who want a clearly lit entrance or garden path without fixed wiring.
The combination of light output, sensor function and IP44 rating is stated in the product details. However, make sure the light receives sufficient sunlight for charging.
1000 lumens, 3000 K warm white light, two modes and an integrated solar battery.
Why it suits this profile: This model is designed for larger outdoor areas where a high light output is desirable. The specifications state 4000 lumens, IP65 protection and a detection range of 8 metres for direct approach and 16 metres from the side.
The IP65 rating is clearly specified and is better suited to a less sheltered installation location than IP44. Even so, position the solar panel away from prolonged shade.
4000 lumens, IP65, adjustable light head and dusk sensor according to the product information.
Why it suits this profile: This model runs on 230 volts and has an E27 fitting. You can therefore choose a suitable bulb, such as an LED bulb with your preferred light colour.
The fitting and maximum load of 60 watts are specified. It is also clear that IP44 provides splash protection rather than complete waterproofing.
E27 fitting, anthracite colour, 29 × 23 × 9 cm and integrated motion sensor.
We have put together a complete, up-to-date list of products that fully meet these strict selection criteria and the applicable European safety regulations.
Install an outdoor wall light on a firm, flat surface. With solar lighting, the panel should receive as much direct daylight as possible. Aim the motion sensor towards the route people use, rather than towards a busy road, moving branches or an area where pets regularly pass.
With a wired light, the power must be switched off during installation. According to the product information, the Brilliant Todd must be connected by a qualified electrician. For every light, use the supplied fixings and check that the housing closes securely after installation.
Clean the light and solar panel with a soft cloth. Do not use aggressive cleaning products and do not direct a powerful jet of water at an IP44 model.
It can be, but performance depends on the amount of daylight, positioning and battery capacity. In a shady corner, the light may stay on for less time. Choose a position with as much unobstructed sky as possible and keep the panel clean.
For a small entrance or balcony, around 180 to 500 lumens may be sufficient. For a driveway or larger garden area, 1000 lumens or more may be more practical. A 4000-lumen model is designed to provide very bright lighting and may be unnecessarily bright for a patio.
IP44 protects against splashing water and is suitable for many sheltered outdoor locations. IP65 offers greater protection against dust and water jets. Neither rating means that you can submerge the light. Always check the product’s exact installation instructions.