Good outdoor lighting makes an entrance, patio, balcony or garden more usable after dark. However, an attractive product photo is no guarantee that an outdoor light is right for your needs. For example, it may not provide enough light, may have the wrong protection rating or may be difficult to install.
The most common buying mistakes are:
The IP rating consists of two digits. The first indicates protection against solid particles, and the second indicates protection against water. An IP44 outdoor light is suitable for many sheltered locations, such as an outside wall, covered veranda or entrance. If you’re installing the light in a fully exposed spot where it will regularly be hit by heavy rain, check whether a higher protection rating is available.
According to their product specifications, the Philips Hara and Brilliant Parson have an IP44 rating. This makes them suitable for general outdoor use, but not for direct jets of water. The Philips Zyren has an IP65 rating, which offers a higher level of protection against dust and water. Also, always check that seals, glass covers and connection points are fitted correctly. The stated protection rating only applies if they are.
Lumens indicate how much visible light a lamp produces. A lower light output may be enough for atmospheric garden lighting. For a driveway, side path or dark entrance, a brighter light is often more practical.
Colour temperature is measured in kelvin:
An outdoor light with a motion sensor doesn’t need to shine brightly all night. The sensor switches the light on when it detects movement. Check the detection direction, mounting height and desired range.
A fixed outdoor wall light with an E27 or GU10 fitting gives you the freedom to choose your own LED bulb. Check the maximum wattage, mains voltage and whether a bulb is included. The Philips Ulio, for example, has an E27 fitting and is supplied without a bulb. According to the product information, the Brilliant Jelani takes a GU10 bulb and needs to be professionally installed on a 230V connection.
Solar outdoor lighting doesn’t need a mains cable, but it does rely on receiving enough daylight. An integrated battery may also need periodic maintenance or replacement, following the manufacturer’s instructions. For smart models, check the connection too: Bluetooth Mesh can link multiple lights, but you can only control them within the system’s range.
Why it suits this profile: This compact black outdoor light is solar-powered and doesn’t need to be connected to the mains. It’s a practical choice for a balcony, shed or entrance without existing wiring.
The product information clearly lists the integrated LED, 180 lumens, 2700K, motion sensor and IP44 rating. You can see straight away that this is mainly an atmospheric guide light, not a powerful spotlight.
Integrated solar battery, warm white light, dimming function and motion sensor. Measures approximately 11.5 × 10 × 11 cm.
Why it suits this profile: This fixed outdoor wall light is a good choice if you want to choose your own bulb and light colour. Its aluminium and glass design works well on an outside wall, patio or covered entrance.
The E27 fitting makes it clear that a bulb isn’t included. You can choose a suitable LED bulb in advance, but you’ll need to order it separately.
Aluminium and glass, E27 fitting, IP44 rating and dimensions of approximately 20 × 25.2 × 22.7 cm. The bulb is replaceable.
Why it suits this profile: A higher light output is useful for a driveway, large garden or dark side wall. According to the product specifications, this solar-powered light produces 4000 lumens, has an adjustable head and detects movement up to 8 metres away when approached directly.
The IP65 rating means you won’t use an IP44 light in a location exposed to harsher weather. Make sure you place the solar panel somewhere it will receive direct daylight.
IP65 rating, integrated LED, 5000K, motion and dusk sensors, and an adjustable light head. According to the product description, a fully charged battery can provide light for several nights.
Why it suits this profile: Magnetic mounting, an integrated battery and USB-C charging make this light a good choice for a balcony, rented home or anywhere you don’t want to install fixed wiring.
You avoid a fixed 230V installation. Take care when mounting it: the light is splashproof to IP44 and the magnetic plate must be securely attached to a suitable surface.
300 lumens, 3000K, integrated motion sensor, USB-C connection and magnetic fixing. The light source is integrated.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the current European safety regulations.
Before you order, check:
A black outdoor light often works well with modern exterior walls and garden furniture, but consider the material too. Aluminium, glass, plastic and metal all react differently to moisture, dirt and damage. Follow the manufacturer’s care instructions and clean solar panels regularly with a soft cloth.
For many sheltered outdoor locations, IP44 is sufficient. This rating protects against splashing water, but not water jets or immersion. For a fully exposed location, a fitting with a higher IP rating, such as IP65, may be more practical. Always check the installation instructions.
It depends on the hours of sunshine, shade, temperature and battery capacity. In winter, the panel often receives less direct light, which can reduce how long the light stays on. Position the panel somewhere as open as possible, keep it clean and check whether the light has an energy-saving sensor mode.
An integrated LED outdoor light generally uses little electricity compared with traditional light sources. Actual consumption depends on the wattage and how many hours it is on. A motion-sensor outdoor light can help reduce consumption because it doesn’t stay on continuously. With solar outdoor lighting, the energy comes from the integrated battery, but charging performance still depends on receiving enough daylight.