Good outdoor lighting needs to suit the location, purpose and outdoor conditions. A lamp for a covered balcony has different requirements from an LED security light by the driveway. Yet many consumers choose mainly based on appearance, lumens or an attractive marketing claim. As a result, the light output may disappoint, the lamp may become damaged quickly or installation may prove more complicated than expected.
In this buying guide, you’ll discover what to look for when choosing solar outdoor lighting, an outdoor light with a motion sensor, garden path lighting and outdoor wall lights.
A high lumen count does not automatically mean that an area will be lit comfortably or evenly. A powerful beam can be very bright in one spot while the rest of the garden remains dark. So also consider:
A 300-lumen lamp may be suitable for an entrance, while a wide driveway needs greater spread and higher light output.
An IP44 outdoor light is protected against splashing water, but it is not designed for direct water jets or immersion. This differs from an IP65 outdoor light, whose housing is, according to the classification, better protected against dust and water jets.
Always check the IP rating and the recommended installation location. An IP44 outdoor wall light, for example, is suitable for a sheltered façade or covered area, but requires more care in a completely exposed location.
An outdoor solar light needs sufficient direct daylight. Shade from a roof edge, tree or tall fence limits charging. In winter and on overcast days, the operating time may also decrease.
Also check the battery capacity, the position of the solar panel and the available lighting modes. A lamp that only comes on briefly when motion is detected generally uses less energy than one that stays on all evening.
Lumens indicate the total amount of light. For atmospheric garden lighting, a few hundred lumens are often sufficient. For a driveway, garage or security function, a higher value may be more appropriate.
Colour temperature is expressed in kelvin:
Check the product details carefully. With some product descriptions, commercial names and technical values may not mean exactly the same thing.
An outdoor light with a motion sensor switches on when movement is detected. Don’t just check whether a sensor is included; also consider:
A sensor by a front door does not need to have a wide range. For a long driveway or large garden, a wider angle or adjustable lamp head is more practical.
Aluminium, plastic, glass and stainless steel are commonly used for outdoor lighting. The material partly determines the weight, appearance and maintenance requirements. For wall mounting, check that the surface and fixings are suitable.
An IP44 outdoor light offers protection against splashing water. An IP65 outdoor light is better suited to a more exposed location, but correct installation remains important. Do not position a lamp where water can collect around connections or openings.
Why it suits this profile: This spike light is designed for garden paths and borders. It is easy to install and does not require a power connection.
The product information states an IP44 rating and a charging time of 4 to 6 hours. So expect atmospheric lighting rather than powerful security lighting.
Stainless steel housing, solar panel, 6500K light and a stated operating time of 8 to 12 hours.
Why it suits this profile: Suitable for anyone looking for a broad, powerful beam by a driveway, garage or large garden area without permanent wiring.
The stated IP65 rating is better suited to a more exposed installation location than IP44, provided it is installed correctly.
According to the product information, 4000 lumens and a motion sensor with a range of up to 8 metres for direct approaches and up to 16 metres for sideways movement.
Why it suits this profile: The three adjustable light heads are designed to illuminate larger areas such as a driveway, patio, garage or spacious back garden.
The product information states a detection distance of 60 feet, an angle of 180 degrees and IP65. Before installation, check that the stated values are suitable for your situation.
302 LEDs, a stated light output of 3000 lumens, three lighting modes and an 1800 mAh battery according to the product description.
We’ve put together a complete, up-to-date list of products that fully meet these strict selection criteria and the applicable European safety regulations.
Solar outdoor lighting uses a solar panel and an internal battery. The lamp does not require permanent wiring, but it does need sufficient daylight. A rechargeable lamp with a USB connection is an alternative for balconies, storage rooms or locations with little sunshine.
The lifespan varies by model and operating time. With integrated LEDs, manufacturers sometimes state a theoretical lifespan, but performance also depends on heat, moisture, battery wear and usage. With a lamp featuring a replaceable GU10 or E27 fitting, you can replace the light source later.
A solar outdoor lamp does not use mains electricity during normal operation. A fixed LED outdoor light generally has a lower wattage than traditional light sources. Check the wattage, operating time and how the motion sensor works. A lamp that only switches on when motion is detected can reduce consumption compared with continuous lighting.