Good outdoor lighting makes an entrance easier to see, creates ambience on the patio and helps illuminate dark areas around your home. However, an attractive product photo does not guarantee that a light will suit your situation. Three common pitfalls are especially likely to cause disappointment.
Light output is measured in lumens (lm). For a garden path or decorative garden light, a modest light output is often sufficient. An entrance, garage or driveway will usually need more directed light. An LED outdoor light uses relatively little energy and often has a long stated lifespan, but also check the actual wattage and light distribution.
Colour temperature is measured in kelvins (K):
The IP code consists of two digits. The first digit concerns protection against solid particles, while the second relates to water.
The IP rating does not tell you everything about installation quality. Also check that the wall is strong enough, that cables are routed correctly and whether a fixed connection must be installed by a qualified electrician.
Solar outdoor lighting works without a fixed mains connection. This is useful for a fence, garden shed or remote part of the garden. However, performance depends on sunlight, panel surface area, battery capacity and operating time. An outdoor light with a motion sensor only switches on when movement is detected, which can make it more practical than lighting that stays on continuously.
Also look out for:
Fixed models, such as some Philips and Brilliant outdoor lights, require a 220-240 V connection. Have this carried out by a qualified electrician in accordance with local regulations.
Why it suits this profile: This compact solar outdoor wall light is designed for an entrance, patio or small balcony without existing wiring. According to the product specifications, the integrated LED provides 180 lm at 2700 K.
The stated 180 lm makes it clear that this is an orientation and ambient light, not a floodlight. The IP44 rating means it should be installed in a reasonably sheltered location.
Solar power, motion sensor, two light functions and a compact size of 11.5 x 10 x 11 cm.
Why it suits this profile: This freestanding Philips outdoor light is suitable for paths, borders, patio edges and balconies. Its aluminium housing, anthracite colour and integrated 2700 K LED are designed for atmospheric lighting.
The specifications state IP44 and 4.3 W. This allows you to use the light appropriately rather than treating it as a heavy-duty security light.
Aluminium housing, PowerShield coating according to the product description and a stated lifespan of 50,000 hours.
Why it suits this profile: This solar security light is designed for a driveway, garage, large garden or another location where a wide beam and motion detection are needed.
The stated IP65 rating is better suited to an exposed location than IP44. However, position the panel somewhere that receives direct sunlight.
302 LEDs, 3000 lm, three adjustable heads, a detection angle of 180 degrees and three light modes according to the product specifications.
Why it suits this profile: This outdoor wall light is supplied without a GU10 bulb. That means you can choose the colour temperature and light output yourself, or even add a smart bulb for your façade, balcony or garden.
You do not pay for a fixed light colour that may not suit your façade. However, check that your chosen GU10 bulb stays within the specified wattage.
Aluminium construction, replaceable GU10 light source and IP44 protection for sheltered outdoor locations.
We have put together a complete, up-to-date list of products that fully meet these strict selection criteria and the applicable European safety regulations.
It can be, as long as the solar panel receives enough direct daylight. Do not place the light beneath a solid canopy or on a north-facing wall that is permanently in the shade. Clean the panel regularly and bear in mind that operating time may be shorter after several dark days.
That depends on the application. Ambient lighting along a path requires fewer lumens than a driveway or security light. In addition to lumens, consider the beam angle, colour temperature and installation height. A wide beam can illuminate a larger area without making one particular point excessively bright.
An LED light generally has a lower stated wattage than older lighting. Consumption depends on the wattage and the number of hours it is switched on. A motion sensor or dusk switch can limit operating time. Solar outdoor lighting does not use mains electricity, but it still depends on charging capacity and the amount of sunlight.