Good outdoor lighting needs to suit the location, its purpose and the weather. Yet many shoppers focus mainly on looks or a low price. As a result, an outdoor light can turn out to be too dim for the driveway, too vulnerable to rain or difficult to install.
Three common pitfalls keep cropping up:
With the right checks in place, you can make a choice that better suits your garden, balcony, entrance or patio.
For a driveway, steps or front door, you mainly need functional light. A wall light with a motion sensor can be handy here: the light switches on when movement is detected. Do check the detection range and mounting height in the product information.
For a patio or balcony, it's more often about atmosphere. A portable rechargeable LED lamp, string of lights or table lamp offers flexibility without fixed installation. Pay attention to the battery life and charging method, especially if you plan to leave the light outside often.
For a garden path or border, solar lights with a ground spike are practical. They don't need a cable, but work most reliably in a spot with plenty of sunlight. Don't place them directly under a canopy, close to a tall fence or beneath dense foliage.
Lumens (lm) indicate how much visible light a lamp produces. A decorative light with around 100 to 200 lumens mainly creates ambience. For an entrance or path, more light may be desirable, depending on the distance and the level of visibility you want.
Colour temperature is expressed in kelvin (K):
An LED outdoor light typically uses little energy relative to its light output. However, with integrated LEDs, the light source is often not replaceable by the user. So check the stated lifespan and warranty conditions.
The IP code consists of two digits. The first digit relates to protection against solid particles; the second to water.
A higher IP rating doesn't automatically make a product suitable for every situation. Also look at the material, the fixing, cable entry and any maintenance instructions.
Why this fits the profile: This solar outdoor light works without fixed wiring and, according to the product information, has two light modes, a daylight sensor and a motion sensor. That makes the light practical for a wall, shed or entrance with enough sunlight.
The product information states IP44 and advises placing it where the solar panel receives direct light. So don't expect optimal charging performance on a dark north-facing wall or under a canopy.
Solar powered, integrated LED, warm white light at 2700 K and a stated light output of 400 lumens per light point.
Why this fits the profile: The metal outdoor wall light has a classic design, an E27 fitting and room for a bulb of your choice. That's handy when appearance, replaceability of the light source and matching an existing style are important.
The light is supplied without a bulb and requires fixed installation. So check beforehand whether you need a suitable E27 bulb and an electrician.
E27 fitting, metal housing, maximum bulb rating of 60 W and IP44 for sheltered outdoor locations.
Why this fits the profile: This set is designed for garden paths, borders, driveways and flower beds. The ground spikes make placement easy when you want to spread several light points without cables.
The stated IP65 protection is higher than IP44, but the lights still need to be placed in a sunny spot. According to the product information, the charging time is 4–6 hours and the burn time is 5–8 hours after a full charge.
Six lights per set, warm white LED, integrated rechargeable battery and a stated IP65 rating.
Why this fits the profile: The portable lamp is designed for a table, balcony or patio. The USB charging function, touch dimmer and RGB lighting give you flexibility when you don't want to install a fixed outdoor light.
The light is IP44 and intended for splash water, not for prolonged exposure to heavy rain. Store it in a sheltered place during bad weather or out of season.
Integrated 1 W LED, stated light output of 140 lumens, touch dimmer, RGB function and USB power supply.
We've put together a full, up-to-date list of products that fully meet these strict selection criteria and comply with current European safety regulations.
With a fixed outdoor wall light on 220–240 volts, professional installation is required. Switch off the power before mounting and follow local regulations. Check that the wall is stable and that cables and connection points are suitable for outdoor use.
A wireless outdoor light or solar garden lighting requires less installation, but not zero maintenance. Clean solar panels and light windows regularly with a soft cloth. With ground lights, check that the spike is firmly in place so it doesn't become a trip hazard. For rechargeable models, it's wise to charge the light according to the instructions and not to open the built-in battery yourself.
That depends on the location. An IP44 outdoor light is protected against splashing water and often suits a sheltered wall, balcony or covered patio. For a fully exposed spot, a higher protection rating, such as IP65, may be more suitable. Always check the full product instructions.
The burn time depends on sunlight, season, temperature, battery capacity and light mode. In winter, solar lights in the UK often charge for less time or less fully. A stated burn time is therefore a product specification under certain conditions, not a fixed guarantee for every night.
An LED outdoor light usually uses very little energy, but consumption depends on the wattage, burn time and number of lights. A sensor can prevent lighting from staying on unnecessarily. Solar and battery models don't use mains power during use, but they do need to be charged sufficiently to remain available.