A light that only comes on when someone approaches your driveway, garden or front door is practical and can help make dark areas around your home easier to see. However, not every outdoor light with a motion sensor is suited to the same situation. A compact solar wall light for a balcony has different requirements from powerful lighting for a driveway.
Look out for these three common pitfalls:
For an entrance, balcony or path, around 180 to 500 lumens may be enough for visibility and ambience. For a driveway, garage or larger garden, a higher light output makes more sense. Also consider the colour temperature:
A motion-sensor light does not need to stay brightly lit all the time. Check whether it has different modes, such as switching on only when it detects movement, a dimmed background setting or a constant-light setting.
The IP code describes protection against solid particles and water:
Also check whether the IP protection only applies when the product is correctly installed and sealed. Wired models must be connected by a qualified installer.
A wire-free outdoor light is useful for rented homes, sheds, garden paths and places without a power supply. When choosing a solar product, consider:
Wired LED outdoor lighting does not need time to recharge, but it does require a suitable power connection. This can be a sensible choice for permanent wall lighting. A model with a replaceable E27 bulb also gives you more flexibility over colour temperature and brightness.
Why it suits this need: This compact solar outdoor wall light works without fixed wiring and is suitable for an entrance, balcony or sheltered garden wall.
The product specification lists 400 lumens, 2700 K, two light modes and IP44. This makes it easier to assess the light level and water protection than with a general marketing claim.
Solar-powered, with integrated LED lighting and a compact size of around 12,7 × 11,2 × 13 cm.
Why it suits this need: This wired outdoor wall light is suited to a permanent entrance, exterior wall or balcony where a power connection is already available.
The specifications separately list a motion sensor and dusk sensor, 800 lumens, 2700 K and IP44. This makes it easier to choose a light for everyday use by the front door.
Integrated LED lighting, an aluminium housing, a 230 volt connection and a stated power rating of 4,3 watts.
Why it suits this need: The three adjustable heads and wide light coverage are designed for a driveway, garage, large garden or another sizeable outdoor area.
The product information lists 3000 lumens, IP65, three light modes, a detection range of 60 feet and a sensor angle of 180 degrees. Check that the stated 7000 K colour temperature suits your intended use.
Solar-powered, with three light heads, 270-degree coverage and no electrical wiring required.
Why it suits this need: This round, black solar outdoor light combines wall mounting with warm white light for an entrance, patio or garden path.
The specifications list 500 lumens, 3000 K, IP44 and an integrated motion sensor. Expect protection against splashes, but do not use it where it will be exposed to direct jets of water.
Solar-powered, with a dimming function, integrated LED lighting and a warmer 3000 K colour temperature.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the applicable European safety regulations.
Position a solar outdoor light so that its panel receives as much direct daylight as possible. Avoid placing it behind glass, under a wide roof edge or directly opposite powerful outdoor lighting. Point the sensor towards the path people use, rather than a busy road, so the light is less likely to switch on unnecessarily.
A wired outdoor light must be connected in accordance with local regulations. Switch off the power before carrying out maintenance, and have fixed connections installed by a qualified installer. Clean the solar panel and sensor window regularly with a soft cloth. Also check that the fitting is still secure.
That depends on its position, the weather and the battery capacity. Less sunlight generally means less energy for charging. Choose a spot with as much direct daylight as possible and keep the panel clean. A wired outdoor light is more reliable if having light available at all times is important.
A motion-sensor light only comes on when the sensor detects movement, so it may be used for less time than a light that stays on permanently. Solar products draw their energy from the battery. With wired LED outdoor lighting, you can calculate energy use by combining the stated wattage with how long the light is on.
Its lifespan depends on the LED module, battery, electronics, installation and exposure to the weather. With integrated LED lighting, the light source is often not user-replaceable. Check the warranty, IP rating, maintenance instructions and availability of replacement parts before you buy.