Who is this buying guide for?

Model photographer

You want to show the shape of a complete origami model and first find out whether your current lens is up to the job.

Fold detail photographer

You want to capture small folds or the texture of the paper in close-up, so you’re considering both magnification and the practical distance from the subject.

Home studio photographer dealing with focus issues

You want to keep several surfaces of a three-dimensional model in focus, and are considering a stable setup or focus stacking.

What should you look for in a macro lens?

Start with the framing you want: a complete model calls for something different from a close-up of a small fold. Then compare the magnification you need, the space around your subject and the mount for your camera.

What to consider What should you look for? Who is this important for?
Fitting the whole model in the frame Try a test shot with your current lens from the available table distance and check its focusing capabilities. If I want to show the full shape, I first need to know whether the model will fit my setup; around 25% of consumers prioritise framing the whole model.
Small folds and paper texture Compare maximum magnification on a like-for-like basis: the actual reproduction ratio on the sensor, not a figure converted to 35mm equivalent. If you want to capture fine paper details in close-up, magnification is a key consideration; around 25% of consumers prioritise these small details.
Keeping several surfaces in focus Check whether your camera supports focus stacking and whether you want to use a stable setup and, if needed, editing software. If I want to keep several folded surfaces in focus, I need to consider focusing and the extra shots involved; around 19% of consumers prioritise sharpness across the model.
Room for lighting Check the working distance at the magnification you need. The minimum focusing distance measured from the sensor plane is not the same as the clear space in front of the lens. If I want to position lighting around the paper, I need to factor in the space between the lens, model and lights; around 19% of consumers choose with this kind of studio setup in mind.
Compatibility with your camera Make a note of your camera model, mount and sensor size, then check the exact lens version and whether it’s compatible with any adapter you may need. If I want to keep using my existing camera system, I need to know which version will fit before I buy; around 12% of consumers prioritise compatibility with their camera system.

Common buying mistakes

  • Assuming ‘macro’ guarantees 1:1 magnification

    The name alone doesn’t tell you the maximum magnification a particular lens can achieve. At a 1:2 ratio, a detail is reproduced at half the size on the sensor compared with 1:1.

    Compare the stated maximum reproduction ratio of the exact lens version with the size of the folds you want to photograph.

  • Confusing minimum focusing distance with working distance

    Minimum focusing distance isn’t measured as the clear space in front of the lens. Sony Netherlands distinguishes between this distance and the working distance from the front lens element. For very close-up work with the Z MC 50mm f/2.8, Nikon Netherlands gives a working distance of around 5 cm in front of the lens.

    Check the working distance at the magnification you need and see whether there’s still enough room to light your model.

  • Comparing equivalent magnification figures with sensor magnification

    OM SYSTEM lists both 1:1 and a 2× 35mm equivalent for the M.Zuiko Digital ED 60mm F2.8 Macro. These are different measurements.

    Compare magnification ratios on the same basis before choosing a lens.

  • Choosing a lens by brand name alone

    A lens won’t necessarily suit every camera from the same brand. For example, Sigma offers the 105mm mentioned here in Sony E and L mounts. Canon specifies particular mount adapters for using EF and EF-S lenses on EOS R cameras.

    Check the full camera model, lens mount and version you’re considering before placing your order.

Brands to consider

Canon

Canon offers RF macro lenses for EOS R cameras.

  • Canon lists a maximum magnification of 1.4× for the RF 100mm F2.8L Macro IS USM.
  • Canon’s stated minimum focusing distance of 0.26 m isn’t the same as the clear working distance in front of the lens. High magnification isn’t automatically necessary for a photo of a complete model.

Nikon

Nikon Z users can compare options including the Z MC 50mm and Z MC 105mm.

  • Nikon specifies 1:1 magnification for the Z MC 50mm f/2.8 and the Z MC 105mm f/2.8 VR S.
  • For very close-up work with the 50mm, Nikon gives a working distance of around 5 cm in front of the lens. Don’t assume a precise working distance for the 105mm based on its different focal length.

Sony

Sony has macro options for the E-mount, including the FE 90mm F2.8 Macro G OSS and FE 100mm F2.8 Macro GM OSS.

  • Sony lists 1:1 magnification for the FE 90mm and up to 1.4× for the FE 100mm.
  • These magnification figures relate to different models. Choose based on the framing and working distance you need, not just the GM designation.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available for Sony E and L mounts.

  • Sigma states a maximum magnification of 1:1 for this model.
  • Dimensions and weight vary by mount. This information doesn’t confirm compatibility with other mounts or prove an independent advantage over other lenses.

Fujifilm

The FUJINON XF 80mm F2.8 R LM OIS WR Macro is an X-mount option.

  • Fujifilm specifies a magnification of 1.0× for this model.
  • An X-mount lens won’t automatically fit a camera with a different mount. The stated magnification alone doesn’t tell you whether the lens will suit every origami setup.

OM SYSTEM

The M.Zuiko Digital ED 60mm F2.8 Macro is a 1:1 option for a compatible Micro Four Thirds system.

  • OM SYSTEM lists a minimum focusing distance of 0.19 m and a maximum magnification of 1:1.
  • The stated 2× 35mm equivalent isn’t the same as 2:1 actual sensor magnification. Nor is the minimum focusing distance the clear working distance.

Laowa

According to Laowa, the Laowa 65mm f/2.8 2x Ultra Macro APO is designed for APS-C and is available in several mount versions.

  • Laowa lists a maximum magnification of 2:1 for this model.
  • Check the exact mount and whether you need that level of magnification for the smallest details you want to capture. The manufacturer’s specification isn’t an independent real-world test.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I always need 1:1 magnification for a complete origami model?

No. Lower magnification may be enough for a photo of a complete model. First, test whether your current lens can capture the model in focus from your preferred distance and with the framing you want.

How can I get more folds in focus at once?

Keep the stationary model and camera steady, and, if needed, take shots at different focus distances to combine later. Canon describes focus stacking as a way to increase depth of field. Check whether your camera body can take the required sequence, or whether you’ll need to do this manually and use software.

Can I use an EF macro lens on a Canon EOS R camera?

Canon states that EF and EF-S lenses can be used with EOS R cameras via mount adapters. An EF-S lens uses a cropped image. Check the exact lens and camera models, and make sure you have the adapter you need.

What are my rights when buying a lens online in the Netherlands?

According to the Dutch government, when you buy remotely online from a business, you generally have 14 days to change your mind, although there are exceptions. Different rules apply when buying from a private seller. If a product is faulty, you’re entitled to a product that works properly, and the seller is your point of contact. The Dutch government states that the Netherlands has no fixed statutory guarantee period.