Who is this choice relevant to?

Interviewer speaking with a quiet narrator

Wants to capture answers clearly and can place the microphone closer to the narrator. Pay attention to microphone position and distracting booth noise; Speaking History recommends making a test recording and listening back.

Creator of an interview archive for long-term preservation

Wants to preserve the original interview file, so pays attention to the recording format, file transfer and secure storage. The Oral History Association highlights the importance of uncompressed, widely used formats for interview recordings.

Interviewer who wants to record each voice separately

Wants to position the microphones separately by the narrator and interviewer, and is happy to use a more involved set-up with extra equipment and cables.

What should you look for when buying?

Compact recorder with built-in microphones

A good fit if: the interviewer and narrator can sit close to the recorder and a simple set-up is important.

Bear in mind: placing a recorder in the middle of the table does not automatically put it close enough to both speakers; also check whether booth noise is audible.

Simple voice recorder with built-in memory

A good fit if: compact controls and the ability to listen back straight away matter more than a wide range of connections.

Bear in mind: check the available space and recording time with the settings you plan to use for the interview.

Recorder with two external microphone inputs

A good fit if: you want to record the narrator and interviewer using separately positioned microphones; the Tascam DR-40XP has two XLR/TRS inputs.

Bear in mind: the microphones, suitable cables and any required power supply make the set-up bulkier in a small booth.

Speaking History recommends checking the sound with headphones and listening back to a short section. Use the points below to tailor your set-up, recording and archiving to your interview.

Priority What should you check? Who should consider this?
Clear speech Test whether the built-in microphones capture both voices clearly from the planned position. Check whether you can monitor the recording with headphones and play the clip back. If you are interviewing a quiet narrator, you will want to place the microphone close enough to the voice and hear any distracting sounds before the conversation begins. Around 36% of consumers say clear speech is their main concern.
Avoiding interruptions Check the power supply and available storage, and test the recording with your chosen settings. Check the recording time for the specific format you plan to use. If the conversation cannot easily be repeated, you will want to know before you start that the recorder has enough power and storage. Around 28% of consumers prioritise uninterrupted recording.
Preserving the archive file Check whether the exact model can record WAV and whether you can safely transfer and store the source file. If you want to preserve or reuse the interview later, you will want to save the original file separately from edited versions prepared for publication. Around 18% of consumers put archiving first.
Recording two voices separately Check how many inputs can be used at the same time and whether your chosen microphones are compatible with the recorder’s connections and power supply. Keep cables out of walkways. If the narrator and interviewer are not equally close to a single recorder, you will want to position a microphone by each speaker. Around 18% of consumers say separate microphone positions are their main concern.

Common buying mistakes

  • Assuming a recorder in the middle of the table will pick up both voices clearly

    The distance from the microphone and sounds in the booth affect what is actually recorded.

    Test both seating positions before the interview and listen back to the clip. If the positioning does not work, see whether a suitable external microphone can be placed closer to the speaker.

    You may need an external microphone, a mount and additional equipment.

  • Assuming the longest stated recording time applies to WAV recording

    Recording time can vary depending on the file format and quality setting. So an MP3 recording time does not tell you how much time is available in PCM/WAV.

    Compare the recording time for the exact format and quality you plan to use.

  • Assuming two inputs mean two microphones are included

    The number of inputs tells you which connections the recorder has, not which microphones or cables come with the set-up.

    Check what is included in the box, and make sure each microphone’s plug and power requirements are compatible.

    Separate microphones, cables and any mounts take up extra space in the booth.

Brands to consider

Zoom

The H1essential is a compact recorder with built-in X/Y microphones, WAV recording and a 3.5 mm input for, for example, a lavalier microphone.

  • Zoom says the H1essential can also be monitored through headphones.
  • The microphone input is not a substitute for two separate XLR microphone inputs; check that the connection is compatible with your microphone.

Tascam

The DR-05XP combines built-in microphones with a stereo mini-jack input; the DR-40XP offers two XLR/TRS inputs for external microphones.

  • The DR-05XP specifications list WAV settings and power from two AA batteries.
  • To use two external microphones with a DR-40XP, you will also need suitable microphones and cables. These are differences between these models, not a judgement on all Tascam recorders.

Sony

According to Sony’s Dutch specifications, the Sony ICD-UX570 series has 4 GB of built-in memory, linear PCM recording and recording monitoring.

  • Built-in memory can make for a simple start without having to insert a memory card first.
  • Check that the recording quality, available space and connections meet your interview needs; 4 GB alone does not determine recording time.

Philips VoiceTracer

The VoiceTracer DVT4110 is a voice-focused recorder; the manual lists an interview mode, PCM/WAV and connections for a microphone and headphones.

  • The manual lists features that are useful for making a recording and checking it during use.
  • Stated recording time varies by format and quality. For the DVT4110, use only information that applies to this model and your chosen setting.

Joybuy products

Joybuy products for recording and processing conversations; check that each model’s recording formats, microphone connections and workflow are suitable for oral history.

64 GB digital voice recorder with transcription function

64 GB digital voice recorder with transcription function

An option for anyone looking to combine recording with transcription; check that the stated feature and processing method suit your interview workflow.

The product name lists 64 GB of storage and a transcription function.

View at Joybuy
64 GB mini voice recorder with transcription and summarisation function

64 GB mini voice recorder with transcription and summarisation function

Could suit anyone looking for a compact voice recorder with transcription; check in advance which languages and processing steps are available for your interview.

The product name lists 64 GB of storage.

View at Joybuy
Rexsun L357 128 GB portable digital voice recorder

Rexsun L357 128 GB portable digital voice recorder

A portable recorder to consider if you are looking for a separate device for interviews; check the recording format and microphone connections you need before buying.

The product name lists 128 GB of storage and model L357.

View at Joybuy
Rexsun L810 64 GB digital voice recorder with one-touch recording

Rexsun L810 64 GB digital voice recorder

An option if you are looking for a recorder that, according to the product name, records at the touch of a button; also check the recording quality and connections you need.

The product name lists 64 GB of storage and model L810.

View at Joybuy
Notta AI 32 GB voice recorder

Notta AI 32 GB voice recorder

An option if you want to combine recording with transcription features; check the languages, processing and storage available for your needs before buying.

The product name lists 32 GB of storage.

View at Joybuy

Frequently asked questions

Is a recorder with 32-bit float recording essential for oral history?

No. Don’t treat 32-bit float as a general requirement for oral history. The Oral History Association stresses the importance of uncompressed, widely used file formats; microphone positioning, a test recording and headphone monitoring remain separate considerations.

What should you check just before the narrator starts?

Check the power supply and storage, record a few seconds of both voices, then listen back to the clip. Speaking History also recommends using headphones during set-up to check for interference or noise.

Do you definitely need XLR inputs for two microphones?

Not for every interview: if one well-positioned microphone captures the voices you need, a more elaborate set-up may be unnecessary. The Tascam DR-40XP has two inputs for two external microphones via XLR/TRS; check that the connections and power supply are compatible with your microphones.

Who can help if a product develops a fault after a consumer purchase in the Netherlands?

According to ACM ConsuWijzer, the seller is responsible for the legal guarantee if a product does not meet what you could reasonably expect when used normally. The legal guarantee does not have a fixed two-year duration for every product.

What privacy arrangements should you make for an oral history interview?

Before recording, discuss what will be recorded, how the interview will be used, who will have access and whether publication or archiving is planned. If an organisation processes personal data and the GDPR applies, there must be a valid legal basis; consent is one possible basis and, according to the Dutch Data Protection Authority, must be given freely, on an informed basis and for a specific purpose.