Who are the different set-ups suited to?

Interviewers who want to record both voices separately

If you want to capture the narrator and your own questions separately, look for a kit with two transmitters and the option to record each channel separately. RØDE describes these features for the Wireless GO II Dual.

Recordists with a fixed seating position

If you’re recording one seated narrator and want a wired connection, choose a model that matches your device. RØDE describes the smartLav+ as having a 3.5 mm TRRS connection; Sennheiser lists USB-C for the XS Lav USB-C.

Recordists who want to check the recording

When an interview can’t easily be repeated, it’s important to test the recording function, power and storage in advance. Zoom describes the F2 as a recorder with local mono WAV recording; RØDE lists local recording on the Wireless GO II transmitters.

What should you look for when choosing?

Wired connection to a phone or computer

Best suited if: the narrator stays seated and you want a simple connection to a compatible device.

Bear in mind: the cable limits movement, and the connection must be an exact match.

Wireless with two transmitters

Best suited if: both the narrator and interviewer need their own microphone.

Bear in mind: you’ll also need to manage the transmitters, receiver, batteries and possible radio interference.

Lavalier microphone with its own recorder

Best suited if: you want to record one speaker locally without a wireless receiver.

Bear in mind: you’ll need an additional recording set-up for a second separate voice.

What to consider What should you check? Who is this important for?
Capturing two voices Check whether the version includes two microphones or transmitters, and whether both voices can be recorded separately. If I want to edit the narrator and my questions separately later, I look for a set-up that records the voices on separate channels. Around 36% of consumers prioritise recording both voices separately.
Connection to your device Compare the input on your phone, computer or recorder with the connection on the specific model, such as TRRS, TRS or USB-C. Then make a test recording. If I want to record without connection issues, the microphone needs to work with the device I already use. Around 27% of consumers prioritise the right connection and straightforward set-up.
Clothing noise Attach the microphone where it won’t rub against fabric, then listen to a test recording while the speaker moves and talks normally. Also check whether a clip and any foam windscreen are included. If the microphone is attached to clothing, I want to hear in advance how the recording sounds when the narrator moves. Around 18% of consumers prioritise a usable recording when clothing moves.
Checking the recording Before the interview, check the power, available storage and selected recording function, then make a short recording and listen back to it. For an interview that can’t be repeated, I want to know that the recording is actually running and can be played back. Around 18% of consumers prioritise a backup recording they can check.

Common buying mistakes

  • Confusing ‘wireless’ with ‘suitable for two voices’

    A version with one transmitter won’t automatically record both speakers on separate channels.

    Check the exact contents of the kit and the channel settings before choosing it.

    For two speakers, you may need an extra transmitter or a separate recording set-up.

  • Assuming a 3.5 mm plug means it’s compatible

    RØDE’s smartLav+ uses TRRS, while the microphone input on the Wireless GO II transmitter requires TRS.

    Compare the full connection on the microphone and input, not just the plug diameter. RØDE specifies a TRRS-to-TRS adaptor for this combination.

    Bear in mind that you may need a suitable adaptor for this combination.

  • Assuming a local backup recording is a guarantee

    An independent recorder or a recording made on a transmitter still needs to be started, powered and checked. A local recording won’t prevent every possible problem.

    Before each session, make a short test recording and play the file back on the device you’ve chosen.

Relevant brands to compare

RØDE

The smartLav+ is a wired option for a compatible TRRS input; the Wireless GO II Dual offers another way to record two speakers wirelessly.

  • RØDE lists a 1.2 m cable for the smartLav+.
  • RØDE marks the Wireless GO II as discontinued. According to RØDE, you’ll need a TRRS-to-TRS adaptor to use a smartLav+ with the transmitter. This doesn’t automatically apply to all RØDE models.

Sennheiser

The XS Lav USB-C is a wired option for recording with a compatible USB-C device.

  • Sennheiser lists a 2 m cable, a clip and a removable foam windscreen.
  • USB-C doesn’t automatically make this microphone suitable for a recorder with only an analogue microphone input.

Shure

The MVL is a wired lavalier microphone for compatible mobile devices with 3.5 mm TRRS or a suitable CTIA adaptor.

  • Shure says a clip and windscreen are included.
  • Shure describes it as compatible with most compatible mobile devices, not as universally compatible.

Zoom

The F2 combines an independent recorder with an included lavalier microphone for recording one speaker.

  • Zoom specifies local mono WAV recording and power from two AAA batteries.
  • This isn’t a complete set-up for two separate voices without additional equipment.

DJI

The DJI Mic 2 with two transmitters is a wireless option for recording two speakers.

  • DJI says the transmitters can make internal recordings.
  • According to DJI, the stated six-hour operating time is based on a specified test without simultaneous internal backup recording. Don’t assume this figure applies to a different way of using the device or a different kit.

Joybuy products for interviews

These Joybuy products are wireless microphone set-ups for interviews. Check the number of transmitters and the connection to your recording device for each version.

DJI Mic Mini 2S, version with 2 TX, 1 RX and Charging Case

DJI Mic Mini 2S (2 TX + 1 RX + Charging Case)

The version with two transmitters and one receiver is worth considering if you want to record two speakers. Check how the set you choose captures both channels.

View at Joybuy
Moman M1CXT, USB-C, 2TX+1RX

Moman M1CXT USB-C Wireless Lavalier Microphone (2TX+1RX)

With two transmitters and one receiver, this version is worth considering for an interview with two speakers. Check that the USB-C connection is compatible with your recording device.

View at Joybuy
Moman M1CT, USB-C, 1TX+1RX

Moman M1CT USB-C Wireless Lavalier Microphone (1TX+1RX)

This version with one transmitter and one receiver is an option for a wireless microphone set-up with one speaker. Check that USB-C works with your recording device.

View at Joybuy
Verbex K9-Black wireless mini microphone with Type-C interface and dual-mic version

Verbex K9-Black Wireless Mini Microphone, Type-C, Dual Mic

The product name specifies a dual-mic version with Type-C. Before recording, check how the microphones and channels are assigned.

View at Joybuy
Verbex ST5 wireless dual microphone with Type-C interface

Verbex ST5 Wireless Dual-Microphone, Type-C

This product name specifies a dual-microphone set-up with Type-C. Check that the version is compatible with your device and how the microphones are recorded separately.

View at Joybuy

Frequently asked questions

Is one lavalier microphone enough for the narrator and interviewer?

Not if you want a separate recording channel for each person. Check whether the version you choose includes two microphones or transmitters and whether you can record the channels separately. RØDE describes these features for the Wireless GO II Dual.

Can a 3.5 mm lavalier microphone plug straight into any recorder or transmitter?

No, the plug diameter alone doesn’t tell you enough. RØDE specifies TRRS for the smartLav+ and TRS for the microphone input on the Wireless GO II transmitter. For this combination, RØDE specifies a TRRS-to-TRS adaptor. Check the connections on the devices you’ll actually be using.

What should you test before the narrator takes their seat?

Make a short recording with the intended clothing and speaking position, then listen back to check that the speech is clear and there’s no fabric noise. Also check the recording function, power and storage, so you know in advance how your device captures the recording.

Do you need a licence for a wireless lavalier microphone in the Netherlands?

Not always. According to the Dutch Authority for Digital Infrastructure, wireless microphones usually don’t require a licence, provided you follow the rules for the correct frequency band and its use. Check which frequencies apply to your system; the available spectrum can vary by location.

Can you record an oral history interview and publish it later?

An organisation processing personal data must establish an appropriate legal basis for doing so and inform the people concerned about the purpose and use. According to the Dutch Data Protection Authority, consent is one possible legal basis, but it isn’t automatically the only one. The Oral History Association recommends documenting the narrator’s informed consent and discussing arrangements for storage and access. This is professional guidance, not a general Dutch publishing licence. The assessment for a specific interview depends on who records it, its content and its intended use.