Who is this setup for?

Creator filming glossy oil paint

You’re filming a detail where reflections could obscure the paint colours or shapes, and want to adjust the light angle and diffusion. IdeelArt and Visualmedia Panthera identify reflections as a consideration when photographing paintings.

Creator showcasing brushstrokes

You want the texture to remain visible in a close-up and are happy to accept that side lighting may be less even. IdeelArt explains how light from one side can cast shadows on brushstrokes.

Creator making colour-consistent videos

You want to produce repeatable footage and take both lighting and camera settings into account. Manufacturer data gives you lighting specifications, but it can’t predict the results of your own footage.

What should you consider when choosing?

Two lights with softboxes

Choose this if: you want to light the detail evenly and have room for two stands.

Bear in mind: two light sources need space and may reduce the shadows that help show the paint’s texture.

One adjustable light with a softbox

Choose this if: you’re filming a small detail, have limited space or want to emphasise brushstrokes with side lighting.

Bear in mind: the lighting may be less even, and changing the angle may also cause reflections.

A separate softbox for an existing light

Choose this if: you already have a suitable continuous light and the softbox is compatible with it.

Bear in mind: the softbox isn’t a light source in itself; check the fitting and what’s included in the box.

What to consider What should you check? Who should prioritise this?
Glare on paint or varnish Whether the light and stand are adjustable; diffusion and reflections in a test shot. When filming a glossy detail, I want to be able to change the angle of reflection so the paint details remain visible. Around 29% of consumers prioritise reducing glare.
Colour under artificial light Adjustable colour temperature and the stated CRI or TLCI rating for the exact light model. For repeat close-ups, I want to keep the light colour and camera settings consistent. Around 23% of consumers prioritise colour consistency.
Visibility of brushstroke texture An adjustable light angle; compare a test shot with even lighting against one with side lighting. If I want to show brushstrokes, I may be happy with less even lighting. Around 18% of consumers prioritise visible paint texture.
Stable light while filming Test the light at your intended frame rate, shutter speed and dimming level. When filming, I want to avoid artificial light causing bands or changes in brightness. Around 18% of consumers prioritise flicker-free footage.
Complete kit or separate light modifier Check what’s included in the box and, if you already have a light, check the exact fitting. If I don’t yet have a suitable light, I want to know what’s included in the kit. Around 12% of consumers prioritise a suitable, complete setup.

A softbox and a different light angle can help, but they don’t guarantee glare-free footage. Assess the shot of the specific painting detail; manufacturer specifications such as CRI or TLCI are no substitute for checking it yourself.

Common purchasing mistakes

  • Assuming a soft light source will prevent glare

    Oil paint and any varnish can still create localised reflections, even in diffused light. This can still obscure details in your footage.

    Test the light angle on the actual painting detail before choosing the size of your softbox or the number of lights.

  • Ordering a separate softbox as if it were a complete video kit

    A softbox spreads light but doesn’t produce it. Check what’s included in the box and the fitting for the full model number.

    You’ll need to arrange a suitable continuous light and, possibly, a stand or second light source separately.

  • Treating a CRI rating or ‘flicker-free’ claim as proof of how your own footage will look

    A stated colour rating or manufacturer claim alone can’t tell you how the painting will look or whether your video will be free from bands.

    Record a test video using your intended camera settings and dimming level, then check both the colour and for any bands.

Brands to consider

Nanlite

The FS-150B twin-light kit is an option to compare if you want two continuous lights, softboxes and stands in one set.

  • The Dutch listing describes a set with two lights, two softboxes and two stands.
  • The Nanlite manual lists a range of 2700–6500 K and average CRI 96/TLCI 97 for the FS-150B.
  • These are model specifications, not an independent assessment of colour rendering on oil paint; two stands also need space.

NEEWER

The NL660 twin-panel kit with softboxes is an option to compare if you want two independently adjustable panels.

  • The European manufacturer’s page lists two panels, two softboxes and two stands, with a stated colour temperature of 3200–5600 K.
  • The manufacturer describes this model as ‘flicker-free’ and lists CRI 96+; these claims don’t confirm the results at every video setting.

Godox

Godox offers separate Bowens softboxes and continuous lights, so you can put together a setup with compatible components.

  • Godox lists the SB-FW6090 as a rectangular 60 × 90 cm Bowens softbox.
  • A separate softbox doesn’t include a light. Check the exact fitting and what’s included in the box; don’t rely on the brand name alone.

amaran

The 100x S is a Bowens continuous light to compare if you want to use one light source with a separately purchased compatible softbox.

  • amaran lists an adjustable range of 2700–6500 K and CRI 95+/TLCI 97+ for the 100x S.
  • The product’s own box contents don’t include a softbox; the stated values are manufacturer data, not an independent measurement of footage of oil paint.

Joybuy products

Related products coming soon.

Frequently asked questions

Do two softboxes always need to be placed on either side of the painting?

No. For more even lighting, you can start with two lights angled towards the artwork; lighting from more to the side can emphasise brushstroke texture. Compare test shots of the specific oil-painted detail, as the paint itself can also reflect light.

Can a polarising filter replace a softbox?

No, a polarising filter isn’t a light source. Nikon explains that a polarising filter can reduce unwanted reflections; using polarising filters on both the lights and camera requires extra equipment and adjustment. Also check that the texture you want to show remains visible.

What should I check when setting up a separate softbox?

Check the full model number, the softbox and light fittings, the diffuser included and the space needed for the stand. A separate softbox isn’t a light, so also check which components you already have and what’s included in the box.

What can I do if I see bands in my video?

Record test shots at your intended frame rate, shutter speed and dimming level. Canon Europe explains that LED light can cause banding with an electronic shutter at certain settings; a ‘flicker-free’ claim doesn’t mean every combination of light and camera will work without issues.

What should I check about the conformity of an electric studio light?

For the exact electric light, check which European product requirements apply and what conformity information is relevant. Your Europe explains that CE marking is only required when applicable EU rules specify it; don’t assume that a passive softbox is the same as an electrical product.