Who is this lighting for?

Painters looking to control glare

If you’re filming a glossy oil painting detail, you’ll want to stop reflections from dominating the image while keeping the surface texture visible. The Canadian Conservation Institute explains how the positioning of light sources affects how an object is lit.

Creators looking to compare colours

If you want to compare several recordings side by side, pay attention to consistent lighting settings, ambient light and white balance. The Rijksmuseum explains how changes in the light falling on a painting can affect measurements when scanning paintings; Digital Transitions and Phase One highlight the importance of consistent colour and tone.

People using a shared studio

If you need to set up and put away lights and tripods regularly, weigh compactness against positioning options and the time needed to record. The manufacturer lists various components included with the NEEWER NL660 kit and gives a stated battery life for the SmallRig RC 60B Lite Edition.

What should you consider when choosing?

Two adjustable light sources

A good fit if: you want to film a larger area of the painting and have room to position lights on either side.

Bear in mind: you’ll need extra tripods, cables and setup space. Check which diffusers are actually included.

COB light with a suitable softbox

A good fit if: you want to shape the light precisely and can position a compatible softbox.

Bear in mind: a reflector isn’t automatically a softbox. Check the mount, power supply and what’s included in the version you’re considering.

Compact or battery-powered lighting setup

A good fit if: you need to move your lights often or have limited space beside your easel.

Bear in mind: the light modifier must be compatible with the light, and the battery life needs to suit the length of your recording sessions.

What to consider What should you check? Who does this matter to?
Reflections and paint texture Can you position the light and softbox outside the reflection angle and adjust the angle of the light during a test recording? If I want to reduce glare without losing sight of the paint texture, I want to be able to test different angles. Around 36% of consumers prioritise controlling reflections while preserving texture.
Consistent colours Check the light’s adjustment options and test it with the intended white balance and the ambient light in the room. When I compare several detail clips, I want to keep the lighting and white balance consistent. Around 29% of consumers prioritise colour consistency.
Space and portability Check the dimensions, how many tripods you’ll need, the cable routing and the stated battery life at your chosen light setting. In a shared studio, I want to be able to put the setup away after use and still have enough room to work. Around 21% of consumers prioritise quick setup and storage.
Kit contents and video use Check which lights, softboxes, tripods and power supplies are included, and test the combination with your own camera settings for flicker. If I want to be able to start filming quickly, I want to know in advance which extra components I’ll need and whether the setup works with my video settings. Around 14% of consumers prioritise a video kit that’s ready to use straight away.

What to look out for when buying and using

  • Assuming a light with a reflector comes with a complete softbox kit

    The contents of a standalone light may differ from those of a two-panel kit. Check the parts list and make sure the light modifier fits the light you’ve chosen.

    A compatible softbox or tripod may be sold separately. Check before planning your setup.

  • Focusing only on glare and overlooking the paint texture

    Even lighting can make surface texture less visible, while light from a more oblique angle can bring out more relief. Record short tests from different lighting angles and choose the look that best shows the detail.

  • Choosing a battery-powered light without checking the recording time

    SmallRig states that the RC 60B Lite Edition runs for 45 minutes at maximum power. Compare the stated runtime for the exact version with the length of your recording sessions, and check which power options are included.

Brands to consider

Godox

The SL60IIBi is a COB continuous light for anyone looking for a Bowens mount and adjustable colour temperature.

  • Godox states that this model is dimmable from 0 to 100% and has an adjustable colour temperature of 2800–6500 K.
  • Check whether the specific version also includes a softbox, tripod and suitable power supply.

amaran

According to the manufacturer, the COB 60x S is a compact 60 W bi-colour COB light with a Bowens mount.

  • The manufacturer lists a power supply and reflector; Aputure/amaran states that this model is CE marked.
  • Softboxes are listed separately. Check the version and plug type for the specific offer; a CE marking alone says nothing about colour rendering.

NEEWER

The NL660 panel kit is a two-light alternative for anyone weighing up a panel setup against COB lighting.

  • According to NEEWER, the kit reviewed contains two panels, two soft diffusers and two tripods.
  • A separate softbox is designed specifically for the 660 panel. NEEWER advises removing any barn doors before fitting it.

SmallRig

The RC 60B Lite Edition is a COB light for anyone looking for a portable setup.

  • SmallRig states that it has a built-in battery and runs for 45 minutes at maximum power.
  • Softboxes are optional accessories. Check the exact version and mount; the stated battery life may be a practical limit for longer recording sessions.

Lighting at Joybuy

These products are suited to a compact, battery-powered setup or COB continuous lighting with a suitable light modifier. Check the kit contents, mount and electrical suitability of the version you choose before putting together your recording setup.

ULANZI VL49 RGB video light with battery

ULANZI VL49 RGB video light

This compact light with a built-in battery is suited to a setup you want to move or put away regularly.

The product name lists a 2000 mAh battery, adjustable colour temperature of 2500 K–9500 K, dimming and a magnet on the back.

Check which accessories are included and whether the specific version meets the applicable electrical requirements.

View at Joybuy
COLBOR 200W COB video light with Bowens mount

COLBOR 200W COB video light

The Bowens mount lets you attach a suitable light modifier, such as a compatible softbox.

The product name lists 200 W and a built-in power adapter. The description mentions adjustable brightness and a colour temperature of 2700 K–7000 K.

Check whether a softbox is included, which power supply comes with the specific version and whether it meets the applicable electrical requirements.

View at Joybuy

Frequently asked questions

Does a softbox make the sheen on oil paint completely invisible?

No, don’t assume it will. Start with two light sources positioned at about 45 degrees on either side, then assess the result on camera. The Canadian Conservation Institute explains that this setup lights the surface evenly, but even lighting can also make the surface texture less visible.

How can you keep detail clips consistent with one another?

Keep the light settings and white balance consistent, and watch out for light coming into the studio. The Rijksmuseum describes how different ambient light can affect the measurements in a specific painting scan; this doesn’t mean every studio needs to be completely dark.

Why does a light sometimes flicker only when filmed?

The relationship between the light source, frame rate and shutter speed can cause visible flicker. Record a test clip using your own camera settings; a product specification doesn’t prove that every recording will be flicker-free.

What are your rights if a light bought online isn’t suitable?

If you buy online from a business as a consumer, you’ll often have a 14-day cooling-off period. You’re also entitled to a product that meets reasonable expectations in the Netherlands; the Dutch government states that there is no fixed statutory warranty period of two years. Check the terms that apply to your purchase and contact the seller if the product is faulty.

Is CE marking required for a softbox kit?

That depends on the components and the rules that apply to them. According to Your Europe, CE marking is required only for products covered by EU rules that make it mandatory, so check the light and power supply included in the specific version. A standalone, passive softbox isn’t automatically subject to the same requirement just because of its name.