Knitting with button controls
You want to add or correct a row as you knit, and prefer tactile controls to a large screen. The Pimoroni Pico Display Pack 2.0 has four buttons; the Pico is a separate component.
If you want to count or correct your progress after every row, physical buttons are a practical option. For larger numbers and on-screen controls, a touchscreen could be a good fit if it works with your setup. An HDMI display can work with a suitable computer you already own, while e-paper is best if the number on screen doesn’t need to change after every row. The display won’t count or save anything by itself: you’ll need suitable software and local storage for that.
You want to add or correct a row as you knit, and prefer tactile controls to a large screen. The Pimoroni Pico Display Pack 2.0 has four buttons; the Pico is a separate component.
You want larger numbers and on-screen controls. Whether you choose DSI or HDMI depends on the computer you already have and the connections available, as the Raspberry Pi and Waveshare documentation explains.
You want to connect a display to an HDMI source you already own, and check the picture, touch controls and power supply separately. With the Waveshare display, the picture comes through HDMI and touch input through USB.
Best for: adding or correcting a row straight away using physical buttons.
Bear in mind: the 2.0-inch screen and the need for a separate, compatible Raspberry Pi Pico.
Best for: a larger touch interface on a compatible Raspberry Pi.
Bear in mind: the DSI connection and whether your chosen screen size is compatible with your Pi.
Best for: a suitable HDMI source you already own and want to use with a counter interface.
Bear in mind: HDMI alone only provides the picture, not touch control; check USB and power too.
Best for: a simple display that doesn’t need updating after every row.
Bear in mind: Adafruit recommends allowing three minutes between refreshes as a safe interval for the Bonnet reviewed here.
| What to consider | What to check before buying | Who is this important for? |
|---|---|---|
| Tactile counting controls | Check the number of buttons and the screen size, and whether the controls and software can increment, correct and save your count locally. | If I want to add or correct a row straight away while knitting, physical buttons matter more than a large screen. Around 36% of consumers prioritise tactile counting controls. |
| Large numbers and touch controls | For DSI, check compatibility with your exact Pi model; for HDMI touchscreens, check that USB is available for touch input too. | If I want to read larger numbers and control the counter on screen, I’ll choose a suitable touch interface. Around 29% of consumers prioritise large touch controls. |
| Existing HDMI source | Check the video output, any adapter you may need, USB for touch input and the power supply for the display you choose. | If I want to use a computer with HDMI that I already own, I’ll check that both the picture and touch controls work. Around 21% of consumers prioritise reusing an HDMI source. |
| Infrequent updates | Consider whether the display needs to change after every row, and check the Pi connection and screen software. | If a simple display is all I need and the counter doesn’t have to be updated on screen all the time, e-paper could be a good fit. Around 14% of consumers prioritise a display that updates infrequently. |
A display shows information, but it won’t count rows or save your progress by itself. A Pico display needs a Pico; a touchscreen for a Pi needs a compatible computer.
Before you buy, decide how you’ll enter each row, where the software will run and how you’ll retrieve your count after a power cut.
You’ll need compatible controls and connections, and time to build the counter software and local storage.
With the Waveshare 7inch HDMI LCD (C), the picture comes through HDMI and touch input through USB. So, a working picture doesn’t automatically mean touch will work too.
Before buying, compare the ports on the display and computer, and check the power supply too.
Depending on your setup, you may need an extra USB cable, power supply or compatible adapter.
For the Adafruit Bonnet reviewed here, Adafruit’s usage guide recommends refreshing infrequently and generally advises allowing three minutes between updates as a safe interval.
Choose this option only if a display that updates less often suits the way you’ll use it.
A Dutch listing for the Pico Display Pack 2.0 has a different SKU from the official PIM580 version. The same product name doesn’t confirm that it’s the same model.
Before buying, check the full manufacturer’s code and the connections on the version being offered.
The Pico Display Pack 2.0 is designed as a small, button-operated display for a Raspberry Pi Pico.
Touch Display 2 uses DSI with a compatible Raspberry Pi; compatibility varies depending on the screen size.
The 7inch HDMI LCD (C) is an option for a suitable HDMI source, with touch input via a separate USB connection.
The 2.13-inch Monochrome E-Ink Bonnet is an option for a Raspberry Pi project where the display doesn’t need to change often.
No. A display only shows information; you’ll need to set up the counter software and storage yourself. You can program a Raspberry Pi Pico locally using MicroPython, and it has a built-in file system. Build and test how you save and retrieve your count before relying on it.
No. According to Raspberry Pi, this display range uses a DSI ribbon cable and gets its power from the Pi. Check that your chosen screen size is compatible with your Pi; the 10-inch version has different requirements from the 5- and 7-inch versions.
With the Waveshare 7inch HDMI LCD (C), the picture comes through HDMI and the touch signal through USB. So, check both connections and the power supply.
According to the Dutch government, you’re entitled to a product that works properly and should contact the seller to resolve the issue. The Netherlands has no fixed statutory warranty period; what you can reasonably expect from a product depends, among other things, on the product and how it’s used. Damage caused by using it incorrectly isn’t necessarily covered by free repair.
According to the European Commission, CE marking is required when a product falls under harmonised EU rules that require it. The mark is a declaration made by the manufacturer, not a certificate issued by a central authority. Modifying a product you’ve bought may mean that its existing conformity assessment no longer applies; if you sell a product you’ve assembled yourself under your own name, you may have manufacturers’ obligations. This doesn’t determine whether a particular DIY setup is compliant.