A night light with a motion sensor can be useful in the bedroom, nursery, hallway, toilet or a dark cupboard. The light switches on automatically when it detects movement, so you don’t have to search for a switch in the middle of the night. However, many models look similar even though they can work quite differently.
Look out for these common pitfalls:
Check whether you need a motion sensor, a light sensor or both. On several models in this selection, the motion function activates in low ambient light, for example at a maximum of 20 lux. Several products have a stated motion detection range of between 3 and 5 metres.
The actual range can vary depending on where the light is positioned, the direction the sensor faces and any obstacles. So don’t place the light behind furniture, curtains or decorations. For a night light in a hallway or toilet, a sensor facing the direction you’ll be walking is usually more practical than one that only looks straight ahead.
A model with only a light sensor is suitable if you want a constant, soft guide light as soon as it gets dark. This can be useful as a bedroom or nursery night light, without it having to respond every time there’s movement.
Brightness is often measured in lumens. The products in this selection range from 20 to 30 lumens. This is intended as guide lighting, not as a replacement for general room lighting.
A dimmable night light gives you more control. Five brightness levels are useful if you want to use the same light in the hallway during the day and beside your bed at night. Stepless dimming lets you fine-tune the brightness even further.
Also check the colour temperature:
According to the product descriptions from the respective brands, some models have a colour rendering index of CRI >85. This is a technical product specification, not a guarantee of a particular user experience.
A plug-in LED night light runs directly from the mains and doesn’t need a battery. However, check that the socket is in a suitable location. According to the product information, models rated at 100–240 V are suitable for a wide voltage range.
A rechargeable night light with a USB connection is more flexible to position. The stated battery capacities for the products in this selection range from 500 mAh to 1100 mAh. A higher capacity doesn’t automatically mean a set operating time: brightness, sensor mode and frequency of use all play a part.
For cupboard lighting with a motion sensor, slim models with adhesive strips are handy. Check the available length beforehand. A 20 cm light fits in a small cupboard, while a 40 cm version spreads more light across a wider shelf. Don’t use these products in a damp area unless the product description states that they’re suitable for it. According to their safety information, the models listed aren’t designed to be exposed to water or excessive moisture.
Why it suits this profile: This model includes two lights with an automatic light sensor and a low stated power consumption of 0.3 W. It’s a good fit if you want to try night lighting without complicated settings.
The product description clearly specifies a light sensor, not a motion sensor. So you know in advance that the light responds to darkness rather than specifically to movement.
Two lights, warm white light at 2800–3000 K, stepless dimming from 10% to 100% and a stated power consumption of 0.3 W.
Why it suits this profile: This rechargeable night light combines motion detection with three colour temperatures and five brightness levels. It’s suitable if you want consistent lighting in several rooms.
The motion mode is linked to low ambient light and has a stated range of 3–5 metres, according to the product information. Adjustable brightness means you’re not limited to one fixed, bright setting.
500mAh USB-rechargeable battery, stated operating time of up to 10 hours in sensor mode, 30 lumens and three colour temperatures.
Why it suits this profile: The 40 cm length and 61 LEDs are designed for wide shelves, kitchen cupboards and wardrobes. The lights attach with adhesive strips, so there’s no need to drill.
The product information specifies the size, number of LEDs and sensor range. This helps you decide in advance whether the light is suitable for the width of your cupboard.
Two lights, PIR detection at 3–5 metres, 1100mAh USB-rechargeable battery and a choice of warm, neutral or cool white light.
Why it suits this profile: With two operating modes, touch dimming and a memory function, you can place one light in the bedroom and the other in the hallway or toilet.
You can choose between constant light and automatic detection. According to the product description, the memory function saves the last brightness setting you selected.
Stepless touch dimming, 20 lumens, 4000–4500 K and a stated sensor range of 3–5 metres at a maximum of 20 lux.
We’ve put together a complete, up-to-date list of products that meet these strict selection criteria and the current European safety regulations.
Point the sensor towards the route you’ll be walking and don’t place the light behind obstacles. Also check that the surroundings are dark enough for automatic mode. For a cupboard light, fitting it to a flat, clean surface usually works better than attaching it to a dusty or damp one.
Operating time depends on the battery, brightness and how often the sensor is activated. The product information for some models states up to 10 hours in sensor mode. Treat this as a stated product specification, not a guaranteed operating time for every situation.
That depends on its power consumption and how many hours it’s on. Models rated at 0.3 W or 0.5 W have low power consumption according to their product specifications. With a USB model, you’re mainly paying to recharge the battery. The actual cost depends on your electricity tariff and usage.