Archivist handling mixed years
You’re archiving newsletters in different formats and editions. Before you start, measure the full page or spread to check that it will fit on the glass.
For individual newsletter pages that fit on the scanning bed, an A4 flatbed scanner is a sensible choice. Choose a larger scanning area if the page or spread won’t fit on A4. For delicate or bound copies, scanning each page individually on the glass is generally more suitable, while an ADF can be useful for large quantities of loose sheets that are suitable for feeding. Test OCR with your own material: the KB points out that both scan and source quality can affect text recognition.
You’re archiving newsletters in different formats and editions. Before you start, measure the full page or spread to check that it will fit on the glass.
You want to handle bound or damaged newsletters individually and check that no pages are missing.
You want to find articles by keyword later, so you need a tested OCR and file-management process as well as scans.
Start by considering the size of the image you want to capture and the condition of the paper. Then think about how many loose sheets you need to process and how you’ll make the archive searchable.
Choose this if: you mainly scan individual pages that fit on the scanning bed. Canon specifies a maximum of 216 × 297 mm for the CanoScan LiDE 400.
Bear in mind: a larger page or spread won’t automatically fit on an A4 scanning bed; positioning and changing pages by hand takes time.
Choose this if: the page you’ve measured or the spread you want to capture is larger than the A4 scanning area and will fit on your chosen model. Plustek lists a scanning area of 11,69 × 17 inch for the OpticSlim 1180; VIISAN describes the VF3240 as an A3 flatbed scanner.
Bear in mind: check both the width and height. An A3 label doesn’t guarantee that every open newsletter will fit in one go.
Choose this if: alongside originals that need to be handled individually, you have lots of loose sheets suitable for feeding.
Bear in mind: an ADF doesn’t automatically make delicate or bound paper suitable for feeding. Epson lists different resolutions for the ADF and flatbed on the WorkForce DS-1730.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Page or spread size | Measure the largest page and, if you want to capture it in one go, the open spread. Compare both measurements with the scanning area of the exact model. | If I want to capture a full page or spread, I want to know in advance whether it will fit on the glass. Around 33% of consumers rank a suitable size as their top priority. |
| Delicate or bound paper | Check a representative copy and see whether it can lie on the glass without unwanted pressure; don’t assume it’s suitable for an ADF. | If my copies are damaged or bound, I want to be able to handle them carefully, one at a time. Around 25% of consumers who prioritise delicate originals say this is their main concern. |
| Searchability | Test OCR with an old page, small print and columns. Check that search terms work and pages appear in the right order. | If I want to search for words or names later, I need a working OCR and file-management process as well as scans. Around 25% of consumers rank searchable text as their top priority. |
| Amount of scanning | Count the pages in a typical issue and distinguish loose sheets from bound or delicate pages before choosing a feeding method. | If there are lots of loose sheets suitable for feeding, I want to know how much manual positioning and changing the process involves. Around 17% of consumers rank processing loose sheets as their top priority. |
The scanning area of the exact model determines whether the full image will fit. The format label alone won’t tell you whether your page or spread will fit in both dimensions.
Measure the largest image you want to capture in both directions and compare it with the model specifications.
If a spread doesn’t fit, you may need to do extra handling or capture it in several scans.
A scan is an image. OCR can make text searchable, but the KB says results also depend on the quality of the scan and the original.
Test the whole process with a representative old newsletter and check that you can find text in the finished file.
Allow time for OCR, checking and any corrections.
VIISAN’s stated scan time is for an A3 colour scan at 200 dpi. The National Archives describes preparation and checking as separate steps in a digitisation process.
Plan by testing a complete issue, rather than relying solely on the time per scan.
Manual positioning, turning pages, organising files and checking quality all take time too.
A newsletter may contain copyright-protected work and personal data. Choosing a scanner doesn’t determine whether you can share scans or put them online.
Check rights, personal data and intended access before sharing files with others or online. The Dutch Government and the Dutch Data Protection Authority outline separate considerations for this.
The CanoScan LiDE 400 is an A4 flatbed scanner for pages placed on the glass individually.
The Perfection V39II is an A4 flatbed scanner; the WorkForce DS-1730 combines a flatbed with an automatic document feeder.
The OpticSlim 1180 is an A3 flatbed option for larger originals and workflows that use OCR.
VIISAN describes the VF3240 as an A3 flatbed scanner for documents, magazines and more.
This Joybuy selection combines a flatbed for originals that need to be handled individually with an ADF for loose sheets that are suitable for feeding.
No image available
The product description lists a flatbed for scanning items individually, including books, magazines and delicate materials, alongside an ADF for documents.
According to the product description, the ADF has a capacity of 50 sheets. Double-sided scanning is listed at 20 pages per minute; output to editable PDF is also mentioned.
Use OCR to make text in your page images searchable, and keep the pages in the right order. Test sample pages to see whether names, small print and columns are easy to find; the KB lists scan and source quality as factors that affect OCR.
Yes, assess delicate copies before processing them. The National Archives describes checking pages and removing metal that could scratch the glass as part of its own digitisation process; this isn’t a legal requirement for every group.
Check that the necessary software and drivers are available for the group’s computer, and consider whether you need additional cover. Epson lists Document Capture Pro and separate paid CoverPlus options for the DS-1730; these options aren’t automatically included with every model.
Not automatically. The Dutch Government says that copyright-protected texts and photographs belonging to others can’t be used without permission. The Dutch Data Protection Authority says that consent is required in most cases to publish personal data online. Check the rights and intended use for each year; buying a scanner doesn’t give you the right to publish.
No. The Dutch Data Protection Authority describes six possible lawful bases and says that an organisation must assess in advance which one applies. The right basis depends on the content and use of the archive.