Start with the film format and the file and quality requirements agreed with your client. For compatible 35mm negatives, a specialist scanner gives you more control over scan settings; if you also work with 120 film, choose a model that explicitly supports those formats. A standalone scanner can work without a computer, but check whether JPEG is sufficient. A camera setup, on the other hand, requires a suitable camera and macro lens.
Who is this guide for?
35mm photographer with demanding delivery requirements
You want to assess and correct negatives, then deliver suitable files to a client. First, check the film format and the agreed output. Plustek’s product specifications are relevant if you’re considering a 35mm scanner.
Photographer working with both 35mm and 120 film
You want to avoid finding that landscape negatives or film holders won’t fit in the scanner. Check the format support of the exact model, such as the formats reflecta lists for the x66-Scan.
Photographer working to a tight deadline
You’re weighing up scanning and correcting images yourself against a simpler capture workflow or outsourcing the work. Factor in the extra steps mentioned by the Consumers' Association, such as removing dust, correcting colour and organising files.
What should you look for?
Specialist 35mm film scanner
Choose this option: if you’re scanning compatible 35mm negatives and want control over settings and post-processing.
Bear in mind: the stated scan range may be limited to 35mm. Also check software compatibility and scan times for your chosen settings.
Standalone multi-format scanner
Choose this option: if you want to capture images without a computer and the model explicitly supports your 35mm and 120 formats.
Bear in mind: the reflecta x66-Scan saves JPEG files to an SD card; its stated 22 MP output is interpolated from a 14 MP sensor.
Standalone scanner for smaller film formats
Choose this option: if you have 135, 110 or 126 negatives and want a straightforward SD card workflow.
Bear in mind: the KODAK Slide N SCAN with 5-inch screen doesn’t list 120 support. Check a test scan against your delivery requirements.
Camera and macro lens with film holder
Choose this option: if you already have a suitable camera and macro lens and want to manage capture and conversion yourself.
Bear in mind: the VALOI easy35 v2 is a film holder with illumination, not a standalone scanner. Check that the holder and lens are compatible.
Have your negatives digitised
Consider this: for a one-off job, a large number of images or when you have little time for your own post-processing.
Agree this in advance: the resolution, file format and included corrections, so the delivery meets your agreement with the client.
| What to consider |
What should you check? |
Who is this important for? |
| Film format |
Note whether your originals are 35mm, 120 or another format, then check the scan range and supplied holder for the exact model. |
If I need to work with different formats, I want to know in advance whether both the scanner and holder will fit. Around 36% of consumers put format compatibility first. |
| Image quality and file |
Agree the file format, intended use for publication or printing, and any corrections required. Distinguish sensor or optical specifications from interpolated output, and assess a test scan. |
For a client delivery, I want to check that the scan and file meet the agreed requirements. Around 29% of consumers who prioritise delivery quality are concerned with this. |
| Turnaround time |
Count the images, run a complete test workflow through to export, and compare the time required with the deadline. |
If the handover date is fixed, I also want to allow time for loading, removing dust, colour correction and organising files. Around 21% of consumers give turnaround time top priority. |
| Complete workflow |
Compare the equipment, software, storage and time required with a quote for the same number of originals and the same output. |
For a one-off job, I want to weigh up the complete setup against outsourcing, rather than looking at just one device. Around 14% of consumers prioritise the total cost of the workflow. |
Common pitfalls
-
Mistaking an interpolated megapixel figure for extra captured detail
The reflecta x66-Scan and the KODAK Slide N SCAN with 5-inch screen are listed with 22 MP output alongside a 14 MP sensor. A higher output figure alone doesn’t prove that more detail has been captured.
Compare the sensor or optical specifications and look at a test scan instead of focusing only on the highest output figure.
-
Confusing a quick capture with a completed client delivery
The stated capture time doesn’t automatically include loading film, removing dust, correcting colour and organising files.
Run a complete test workflow through to export, then allow for that time across the number of images and the deadline.
Allow time for post-processing and file organisation as well as scanning.
-
Treating a discontinued flatbed model as readily available new
Epson Netherlands lists the Perfection V600 Photo as discontinued. For a specific offer, the condition, supplied holders and software support may therefore need extra attention.
Check these points before counting the model as an option for your job.
Missing film holders or suitable software may require extra time and expense to source.
-
Budgeting for a camera holder as if it were a complete negative scanner
The VALOI easy35 v2 attaches to a macro lens and doesn’t capture film on its own.
Check that you have a suitable camera and macro lens, and compare the complete setup with a scanner or outsourcing.
If you don’t have a compatible camera and macro lens, you’ll need those components for the capture workflow too.
Brands to consider
Plustek
The OpticFilm 8300i SE is a computer-connected film scanner for 35mm negatives, aimed at users who want control over scan settings.
- Plustek says the model has an infrared channel, 7.200 dpi hardware resolution and SilverFast SE Plus 9 software included.
- The stated scan range is 35mm. Check that the software is compatible with your computer; these specifications aren’t an independent measure of quality.
reflecta
The x66-Scan is a standalone option for the 35mm and 120 formats listed by the manufacturer.
- According to reflecta, the model saves JPEG files to an SD card and has a 14 MP sensor.
- The stated 22 MP output is interpolated. reflecta lists a separately available holder for 126 film.
KODAK Photo Plus
The Slide N SCAN with 5-inch screen is designed for the specified 135, 110 and 126 negatives.
- The product specifications list a 14 MP sensor, SD storage and a 22 MP mode.
- The 22 MP mode is interpolated. Check which screen version you’re buying: the separate model with a 7-inch screen has different stated sensor specifications.
VALOI
The easy35 v2 is an illuminated film holder for capturing 35mm and smaller film formats with a camera.
- VALOI says the holder attaches to a macro lens.
- You’ll need a suitable camera and macro lens. Don’t treat claims about speed or image quality as independently proven performance.
Epson
The Perfection V600 Photo is an example of a flatbed scanner with film holders for formats including 35mm and 120/220 film.
- Epson lists film holders and DIGITAL ICE for this model.
- Epson Netherlands lists the V600 Photo as discontinued and no longer available through its product page. Bear this in mind when assessing remaining stock or a second-hand unit.
Products at Joybuy
Related products coming soon.
Frequently asked questions
Should I find out what type of negative I have before buying?
Yes. This lets you compare the scan range and holder with your originals. The Plustek OpticFilm 8300i SE lists 35mm as its scan range; reflecta also specifies certain 120 formats for the x66-Scan. Always check the specifications for the exact model.
How should I plan scanning before the delivery date?
Start with one complete test, from loading the film to exporting it in the agreed format. The Consumers' Association highlights removing dust, colour correction and file organisation as steps that take extra time; allow for these as well as the scan time.
Is the 22 MP mode the same as capturing 22 MP of detail?
No. For the reflecta x66-Scan and the KODAK Slide N SCAN with 5-inch screen, the stated 22 MP output is interpolated. Compare this figure with the stated 14 MP sensor and assess a test scan against your client’s delivery requirements.
Do Dutch privacy rules apply to scans I deliver to a client?
According to the Dutch Data Protection Authority, recognisable people in images are personal data under the GDPR. If you process personal data on behalf of an organisation, the Dutch Data Protection Authority says a written data processing agreement is required. Don’t assume that there are or aren’t any recognisable people just because the subject is described as ‘landscape’.