Who is a NAS suitable for?

Editors who want to edit directly from a NAS

If you want to open source video directly over the network, you’ll need to consider the entire connection and your editing setup. Adobe outlines network and storage requirements for shared workflows in Premiere.

Creators who want to protect their footage

If you edit locally, you can use a NAS to store source files and project versions in one central location. Synology also recommends backing up to a separate destination, so a NAS alone isn’t a complete backup strategy.

Creators with a growing video archive

If you want to keep both existing and future footage, it’s worth calculating the usable capacity after choosing your drive configuration. ID.nl highlights storage capacity and backup options when choosing a NAS for photos and videos.

What should you look for when choosing?

Start by deciding whether you’ll edit locally and transfer files to the NAS afterwards, or read your media from the NAS while editing. For shared 4K workflows in Premiere, Adobe recommends 10 Gbps; Adobe also recommends keeping the media cache local on each workstation.

NAS alongside local editing

Choose this when: you edit from a directly connected drive and use the NAS for central storage, project versions or access from other devices.

Bear in mind: you’ll need to transfer new footage and changes; RAID isn’t a replacement for a separate backup destination. Synology recommends backing up to a separate destination.

Editing directly from the NAS

Choose this when: you want to access media over the network or work with shared storage across multiple workstations. For Premiere Productions, Adobe specifies a minimum of 1 Gbps per workstation and recommends 10 Gbps for certain larger or shared workflows.

Bear in mind: the connection from workstation to NAS, the drives and the number of users working at the same time. Two 2.5GbE ports don’t, by themselves, provide a 10Gbps connection for one editor.

Key consideration What should you check? Who is this important for?
Network for editing If you edit from the NAS, check the ports and connection across your workstation, switch and cabling. Adobe recommends 10 Gbps for shared 4K workflows in Premiere. If I want to access source video over the network while editing, I need to know whether the whole connection is up to the job; around 36% of consumers prioritise editing directly from a NAS.
Restorable backup Check whether you can back up your files to a separate destination and include a restore test in your routine. I want to be able to restore source files and project versions after data loss or a problem with the NAS; around 29% of consumers prioritise keeping their footage safe.
Usable storage capacity Calculate capacity based on the drives you’ll actually use and your chosen drive configuration. If you’re considering a diskless NAS, check what’s included and whether the drives are compatible. If my video archive is growing, I want to leave room for future footage and projects; around 21% of consumers prioritise archive space.
Working collaboratively For Premiere Productions, check your SMB setup and fixed paths: use the same volume name on Macs and the same drive letter on Windows systems. When several editors are working on the same project, I want shared storage to be accessible from every workstation; around 14% of consumers prioritise collaborating on shared files.

Pitfalls when choosing a NAS for video

  • Thinking RAID is a complete backup

    RAID in a NAS isn’t a substitute for a copy stored elsewhere. If data is lost or the NAS develops a problem, your central storage could also be affected.

    As well as your NAS, plan for a restorable copy and test that you can restore a project file and source clip.

    A separate backup destination requires its own storage capacity.

  • Assuming two 2.5GbE ports mean 10 Gbps for one editor

    The ports on a NAS don’t prove that a single workstation has a 10Gbps connection. Adobe recommends 10 Gbps for certain shared video workflows; the right setup also depends on the connection and the number of users.

    Check the connection from your workstation to the NAS, and don’t treat claims about combined ports as a guaranteed speed for each editor.

    If your editing workflow needs more network speed, you may need additional network equipment.

  • Confusing raw drive capacity with usable project space

    Usable capacity depends on the drives you use and the configuration you choose. Some NAS enclosures are sold without drives.

    Calculate capacity based on the drives you plan to use and your chosen level of redundancy, and check that they’re compatible with the exact model.

Brands to consider

Synology

The DiskStation DS925+ is a four-bay NAS sold without drives, with two built-in 2.5GbE ports. The DX525 expansion unit is sold separately.

  • Synology outlines backup and expansion options; usable storage capacity depends on the drives and configuration.
  • Synology’s throughput figures are based on in-house tests and don’t automatically predict the speed of your editing connection. Check drive compatibility too. The Joybuy product page for the DS925+ lists both a two-year and a three-year manufacturer’s warranty; confirm which term applies.

QNAP

The TS-464-8G is a four-bay NAS sold without drives, with two 2.5GbE ports and two M.2 slots.

  • According to QNAP’s model specifications, 10GbE is available as an option via a PCIe expansion card.
  • The standard model doesn’t have a built-in 10GbE port. QNAP warns against using unsupported memory modules.

ASUSTOR

ASUSTOR positions the NIMBUSTOR 4 Gen2 (AS5404T) as a four-bay NAS for content creation, with two 2.5GbE ports and four M.2 slots.

  • ASUSTOR describes SMB Multichannel as a way to combine connections.
  • The advertised speed isn’t an independent measurement of your setup, nor does it prove that a single standard 2.5GbE connection will be faster.

UGREEN

According to UGREEN, the NASync DXP4800 Plus has four bays, a built-in 10GbE port and a 2.5GbE port.

  • The built-in 10GbE port may be useful if you want to set up a shared workflow with a faster network connection.
  • The port specification is provided by the manufacturer; actual speed also depends on your workstation, network and drives. This specification isn’t an independent measure of editing performance.

TerraMaster

The F4-424 is a four-bay NAS with two 2.5GbE ports and two M.2 slots.

  • The listed ports and slots can help you compare network connectivity and expansion options.
  • TerraMaster’s transfer test uses four 18 TB drives in RAID 0; that result isn’t directly applicable to a configuration that uses drive redundancy.

Joybuy products for central storage

These NAS models are designed for central storage alongside local editing. Calculate usable capacity using your chosen drives, and plan a separate backup destination for important source files.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+

Suitable if you want to keep project files in one central location; work out the usable capacity you need based on your chosen drives and configuration.

A NAS or RAID isn’t a substitute for a separate backup destination.

View at Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+

Suitable for storing multiple projects centrally; calculate usable capacity based on the drives and configuration you actually plan to use.

For important source files, remember to plan for a separate backup destination too.

View at Joybuy
Synology DiskStation DS925+ without hard drives

Synology DiskStation DS925+, without hard drives

Suitable for storing project files centrally; this model is supplied without hard drives.

Before buying, check which drives are compatible with the exact model and plan for a separate backup destination.

View at Joybuy

Frequently asked questions

Do my source files need to be on the NAS while I’m editing?

No. You can edit locally and use the NAS for central storage. If you work directly from shared storage in Premiere, the full network connection and storage performance matter; Adobe recommends keeping the media cache local on each workstation.

How do I set up a shared Premiere Productions project?

Adobe recommends SMB for connecting to shared storage. Use the same volume name on Macs and the same drive letter on Windows systems for that storage; keep Media Cache Files and Database on a fast, directly connected drive for each workstation.

Is RAID enough to protect my original footage?

No, RAID isn’t a complete backup. As well as local measures, Synology recommends backing up to a separate destination and refers to the 3-2-1 strategy. Regularly test that you can actually restore a project file and source clip.

What should I check about the drives and warranty?

Check whether hard drives are included with the NAS and whether the drives you plan to use are compatible with the exact model. The Joybuy product page for the Synology DS925+ lists both a two-year and a three-year manufacturer’s warranty; confirm which term applies before you buy.

Do Dutch privacy rules apply to footage in my project?

Images in which people can be recognised may count as personal data. The Dutch Data Protection Authority describes an exemption for footage that someone keeps private or shares only with a very limited group; this exemption doesn’t necessarily apply to wider publication or business use. Organisations that process personal data must determine appropriate security measures based on the risks. A landscape video without identifiable people isn’t automatically subject to these rules on images.