Which studios is this for?

Studio with shared drawings

If colleagues regularly open the same project folder from different workstations, it’s important to test whether your CAD app locks files as expected. Autodesk Support outlines specific points to consider for AutoCAD; these do not automatically apply to every CAD application.

Studio where project recovery is critical

For studios that need to restore earlier versions and keep a copy in case the NAS is lost, recovery and a separate backup are important. The National Cyber Security Centre stresses that RAID is not a substitute for a backup.

Growing studio with large files

If several workstations are transferring files or your storage needs are growing, compare the number of drive bays, network connections and expansion options for each model. A connection on the NAS alone does not tell you how quickly your CAD files will be handled in practice.

What should you look for when buying?

For shared CAD projects, it’s worth testing access and file locking first, then arranging recovery, and only after that comparing network and storage expansion.

What to consider What should you check? Who should give this more weight?
Working at the same time Test what happens when the same drawing is opened at once on two workstations, using your CAD version. Also check folder permissions and the access method you use; Autodesk Support discusses this specifically for AutoCAD. If I open the same drawing as my colleagues, I want to know whether our changes could conflict. Around 31% of consumers put reliable file locking at the top of their list.
Recovery after errors or an outage Check which version recovery or snapshot features are suitable for the model and setup, where the separate backup will be stored, and whether recovery has been tested. The National Cyber Security Centre warns that RAID is not a substitute for a backup. If earlier project versions and a copy in case the NAS is lost are important, I want to plan for recovery in advance. Around 25% of consumers give recovery their highest priority.
Access speed Compare the ports on the exact NAS model with the connections on your workstations and switch. Test with your own files: manufacturer specifications do not measure the performance of your CAD workflow. When transferring large files from several workstations, I want to know whether the whole network is set up to use the connection I need. Around 25% of consumers prioritise network speed.
Storage growth and configuration Calculate the usable storage you need based on your projects and storage setup. Check which drives are supported by the exact model and what is included in the offer; Synology notes that support for unlisted drives may be limited. If project storage is growing, I want to factor in drives and any expansion options when making my choice. Around 19% of consumers cite room to grow and the complete configuration as their top priority.

Common pitfalls

  • Assuming a shared folder will automatically prevent conflicts

    Autodesk Support describes situations where AutoCAD on a network or NAS does not show the expected read-only message. The consequences depend on the CAD application and network access method.

    Before sharing projects, test file locking with your own CAD software, two users and the network access method you plan to use.

    A test can show whether your studio needs a different file management setup.

  • Using RAID as your only safety net

    RAID can help if a drive fails, but it is not a substitute for a backup stored elsewhere.

    Plan a separate copy of your projects and test that you can restore your files.

    A separate backup location also needs to be managed and checked.

  • Comparing only the NAS enclosure or raw capacity

    The drives and storage setup you choose also affect how much space is usable. Drive compatibility is another factor to consider with the Synology DS925+.

    Compare configurations for the exact model and check which components are included.

    Allow for drives and any expansion options that need to be purchased separately.

Relevant brands

Synology

The DiskStation DS925+ is a four-bay NAS with two built-in 2.5GbE ports. It may be worth considering when comparing drive expansion and backup options.

  • Synology describes Hyper Backup as a tool for creating copies in other locations.
  • Check drive compatibility for the exact model and DSM version. Synology notes that support for unlisted drives may be limited.

QNAP

According to QNAP, the TS-464 has four drive bays, two built-in 2.5GbE ports and M.2 slots. The manufacturer also mentions an optional route for expanding network connectivity.

  • QNAP describes storage and snapshot management for its NAS solutions.
  • Check the features available with your chosen configuration and arrange a separate backup location. Stated transfer speeds do not measure the performance of your CAD workflow.

ASUSTOR

According to ASUSTOR, the LOCKERSTOR 4 Gen2 AS6704T has four drive bays, two 2.5GbE ports and four M.2 slots. The manufacturer mentions an optional 10GbE card.

  • These connection and expansion options may be relevant when comparing the NAS and your studio network as a whole.
  • An expansion card may require additional components and compatible network equipment. Don’t confuse the AS6704T with the AS6704T v2: their published network specifications differ.

TerraMaster

According to TerraMaster, the F4-424 has four drive bays, two 2.5GbE ports and two M.2 slots.

  • The manufacturer describes several RAID configurations and expansion options.
  • A manufacturer-stated transfer test using four drives in RAID 0 does not prove what performance or recovery protection another studio setup will provide.

NAS models at Joybuy

These Joybuy product picks are aimed at studios looking to store shared CAD files and plan for growing storage needs.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

An option to compare if you want to manage shared project files on a NAS and your storage needs may grow. Hard drives are not included; check compatibility and choose them separately.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

An option to compare if you’re looking for a Synology NAS for shared project files and want to plan for storage expansion. Check which drives and expansion options are suitable for your setup.

View at Joybuy

Frequently asked questions

Can everyone safely edit the same CAD drawing at the same time from a NAS?

You can’t tell from the NAS specifications alone. For AutoCAD, Autodesk Support explains that file locking is handled by the operating system or file access software, and that a NAS or network setup may not always show the expected read-only message. So test your CAD version, access method and permissions with two users.

What should I look out for when moving AutoCAD projects with external references?

Check the paths to the external references after moving the files. Autodesk Support explains that a relative path can fail if the same network location is accessed in different ways, for example using a drive letter in one case and a UNC path in another.

Are RAID and snapshots enough for a backup?

No, they are not a substitute for a separate backup. The National Cyber Security Centre warns that RAID is not a backup, so plan a copy in another location and test recovery. Snapshots can also help you restore earlier versions if your chosen NAS setup supports this feature.

Which components should I check before buying?

Check which drives and any network expansion options are compatible with the exact model and whether they are included; also arrange a separate location for backups. For the DS925+, Synology notes that support for unlisted drives may be limited, so check the compatibility information for your chosen combination.

What security is needed if CAD projects contain personal data?

Organisations must protect personal data appropriately, but according to the Dutch Data Protection Authority, the measures that are appropriate depend on the situation. This does not automatically mean that you need a particular NAS model, RAID level or feature; assess the data and your studio setup.