Who is this choice relevant to?

Photo archive administrators

If you want to be able to restore irreplaceable RAW files, you’ll need a separate backup as well as a NAS. The Digital Trust Center advises against relying on a single backup location; Synology Knowledge Center also explains how to back up to a separate destination.

Groups with a growing RAW archive

The drives’ total capacity isn’t the same as the usable space available after choosing a RAID configuration. Synology Knowledge Center explains how the RAID type affects usable capacity.

Groups managing photos together

If members have different responsibilities, it’s important to set permissions for each user, group or folder. The Dutch Data Protection Authority points out that identifiable people in photos are personal data, and that access permissions need to be set.

What should you consider when choosing?

Two-bay NAS

Suitable for: an archive whose calculated usable capacity and expected growth can be accommodated by two drive bays.

Bear in mind: the enclosure has no additional internal bays for future expansion, and redundancy may also use some of the drive space.

Four-bay NAS

Suitable for: a growing archive or a group that wants more bays to plan its storage configuration.

Bear in mind: having more bays doesn’t automatically make the setup cheaper or safer; capacity and drive compatibility still depend on the configuration you choose.

First, calculate how much space will be available after setting up your storage configuration. Then check that shared access and your whole network are suited to the way members work with large files.

Consideration What should you check? Who is this important for?
Recoverability Work out which files can be replaced, then choose your storage configuration and arrange an off-NAS backup that you can test. If I want to be able to restore irreplaceable photos after a fault or incident, recoverability comes first. Around 33% of consumers give it top priority.
Usable capacity Estimate how quickly the archive will grow and calculate usable space using your intended drives and RAID configuration. Check compatibility with the exact model. If I want to leave room for new RAW files, I compare usable capacity rather than just adding up the drives’ capacities. Around 27% of consumers prioritise capacity and growth.
Access and privacy Specify who can upload, read, edit and delete files. Check that the software supports these roles, then test the permissions. If I want to manage photos with other members, I want to avoid giving everyone more permissions than they need. Around 27% of consumers prioritise restricted access.
Transferring large files Check the connections on the NAS, computers and network equipment. Decide whether members will be archiving files or editing them over the network too. If I regularly transfer large files, I look at the whole network connection, not just the NAS port. Around 13% of consumers prioritise convenient transfers.

Common pitfalls

  • Confusing total drive capacity with usable capacity

    Your chosen RAID configuration affects how much space remains available. If you only calculate this after setting everything up, the archive may have less space than you expected.

    Calculate capacity using your intended drive sizes and storage configuration before choosing the enclosure and drives.

    You may need a setup with additional drives or a different storage configuration if the available space falls short.

  • Treating mirrored storage as your only backup

    Redundancy can protect against certain drive failures, but it doesn’t protect against every cause of data loss, such as deletion or an incident affecting the NAS or its location.

    Arrange a separate backup outside the NAS and regularly test that you can restore files. The Digital Trust Center advises against relying on a single backup location.

    Allow for a separate backup destination and time to carry out recovery tests.

  • Relying on outdated assumptions about drive compatibility

    In information about DSM 7.3 and later, Synology describes greater flexibility when installing certain external HDDs and 2.5-inch SATA SSDs in Plus models from 2025 onwards. Being able to install a drive is not the same as receiving support for drive-related issues.

    Before buying, check the current compatibility policy and the lists for the exact model and drive. Synology notes that support for certain issues may be limited for drives that aren’t listed.

    Using a drive that isn’t on the applicable compatibility list may limit support for drive-related issues.

Relevant brands to consider

Synology

The DS225+ has two drive bays, while the DS925+ has four. Synology lists file sharing and backup capabilities for this product range.

  • According to Synology, the DS225+ has one 2,5GbE port and the DS925+ has two.
  • Usable capacity depends on the drives and the RAID configuration you choose. For the DS925+, also check the current drive compatibility information; support for certain issues may be limited for drives that aren’t listed.

QNAP

The TS-264 is a two-bay option for groups looking into shared storage and user management.

  • QNAP specifies that the TS-264 has two 2,5GbE ports and two M.2 slots, and is supplied without hard drives.
  • QNAP’s documentation sets a firmware requirement for folder permissions. Check the current settings and requirements for the system you choose.

ASUSTOR

The NIMBUSTOR 4 Gen2 AS5404T is a four-bay model to consider if your archive is growing or several members are adding files.

  • According to ASUSTOR, the AS5404T has two 2,5GbE ports, four M.2 slots and expandable memory.
  • Manufacturer-quoted transfer speeds are based on a specific test configuration and don’t predict the speed of your group’s network.

NAS enclosures at Joybuy

These Synology NAS enclosures are worth considering for shared file management and RAW archives where you want several internal drive bays.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+

Suitable for a group archive that needs five internal drive bays and may grow into an expansion setup.

The description lists five drive bays, expansion to fifteen bays and two 2,5GbE ports. Hard drives are not included.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Suitable for a growing shared archive that needs eight internal drive bays.

The product description lists eight drive bays, an expansion option and two 2,5GbE ports. Check which drives are suitable for your intended configuration.

View at Joybuy
Synology DiskStation DS925+ without hard drives

Synology DiskStation DS925+, without hard drives

Suitable for a growing archive that needs four internal drive bays, with the option to expand.

The description lists four drive bays, expansion to nine bays and two 2,5GbE ports. Hard drives are not included.

View at Joybuy

Frequently asked questions

Is RAID a backup for our RAW photos?

No. Depending on the RAID type, your storage configuration may protect against certain drive failures, but it isn’t a separate backup. Keep a backup at another destination too, and test that you can restore your files.

Do we need to buy hard drives separately?

Check the details for the exact version: according to the product information, the QNAP TS-264-8G and the Synology DS925+ without hard drives are supplied without drives. Choose drives that suit the model and your preferred storage configuration, and arrange a separate backup destination too.

What should we check before installing existing drives in a NAS?

First, check compatibility with the exact NAS model and make a copy of any existing data. The Synology DS925+ installation guide warns that a drive containing existing data may be formatted and erased during installation.

How long can we keep photos of identifiable people?

The Dutch Data Protection Authority doesn’t set a general, fixed GDPR retention period: personal data must not be kept for longer than necessary for its purpose. So set and document an appropriate retention period for the specific use of your group’s photos.

How should we manage access when members change?

Specify which folders are needed for each role, and update permissions when responsibilities change. The Dutch Data Protection Authority describes recording access permissions in an authorisation matrix; also test the permissions using standard member accounts.