Who is this guide for?

Producer working on active sessions

You want to store large project folders without automatically moving storage for an active DAW session onto the network. Ableton recommends keeping project and media files stored locally.

Creator with an irreplaceable archive

You want to be able to recover sessions and recordings after mistakes, drive failure or a security incident. The Dutch Data Protection Authority recommends that organisations make backups and check that they can be restored.

Studio with a growing project collection

You store complete session folders or share files with others, and want to match capacity, drive bays and access permissions to your needs.

What should you look for?

First decide where you actively work on projects. Then choose NAS storage and a backup plan to suit your archive, file transfers and recovery needs.

What to consider What should you check? Who is this important for?
Active work Decide whether your working copy will stay local or you want to work directly from the NAS. If you choose the latter, test your DAW and the complete network connection. If I don’t want to rely on my network during an active session, I’ll keep the working copy local. Around 31% of consumers prioritise this way of working.
Recoverability Check whether you can back up to a separate destination and test that you can restore a project folder. QNAP warns that RAID is not a backup; snapshots may still depend on the same storage pool. If a project must not be lost, I want to be able to restore a separate copy. Around 31% of consumers put recoverability first.
Capacity and expansion Measure complete project folders and plan for future growth. Compare the number of drive bays and the usable capacity of your intended storage configuration. As my collection grows, I want enough usable space and suitable expansion options. Around 25% of consumers prioritise archive capacity.
Transfers and sharing Check file sharing and user permissions. Gather external audio files using your DAW’s feature, then test a copy on the other computer; you may still need to install plug-ins separately. If I transfer projects between computers or creators, I want the media used in them to remain available. Around 13% of consumers prioritise shared access.

Common pitfalls

  • Assuming RAID or snapshots are a recoverable second copy

    RAID helps guard against some of the effects of drive failure, but it does not protect against every cause of data loss. QNAP also explains that snapshots depend on the storage pool where they are kept.

    Set up a separate backup destination alongside your NAS, and try restoring a complete project folder. The Dutch Data Protection Authority recommends that organisations check they can restore backups.

  • Assuming a fast network port guarantees smooth DAW performance

    A port specification alone tells you nothing conclusive about the connection between your computer, network and music software.

    First decide what role the NAS will play. For active Ableton projects, Ableton recommends storing project and media files locally.

  • Assuming raw capacity or a diskless enclosure gives you space you can use straight away

    Usable space depends on the drives and storage configuration you choose. Some enclosures are sold without hard drives.

    Work out the intended storage configuration using suitable drives, and check which components are included with the product variant before you buy.

  • Copying only the session file

    A session may refer to audio files or samples outside the folder you copied. You may also need to install plug-ins separately.

    Gather the media used in your DAW with its relevant feature, then open a test copy on the other computer.

Brands to compare

Synology

DiskStation models range from compact two-bay enclosures to expandable models. The BeeStation BST150-4T is a different setup, with a built-in drive.

  • Synology specifies a 2.5GbE port for the DS725+ and expansion using a separately available DX525.
  • For 2025-Plus models, check drive compatibility and the DSM version. Synology explains the requirements for compatible drives; a port or drive specification is not a DAW performance test.

QNAP

The TS-264 is a two-bay model to compare if you want to look at file management and network ports in one enclosure.

  • QNAP specifies two 2.5GbE ports and two M.2 slots for the TS-264.
  • QNAP says the TS-264 is supplied without an HDD and stresses that RAID is not a backup. Port specifications do not prove how the device will perform with your music software.

ASUSTOR

The AS5402T is a two-drive model to compare if you’re looking for M.2 slots and network options alongside SATA storage.

  • ASUSTOR lists four M.2 slots and two 2.5GbE ports.
  • ASUSTOR’s published throughput figures are laboratory results under optimised conditions; don’t take them as the speed you’ll get for your own project folder.

TerraMaster

The F4-424 is a four-bay SATA model to compare for a growing project archive.

  • TerraMaster specifies two 2.5GbE ports and two M.2 slots.
  • The manufacturer states that maximum raw capacity varies depending on the RAID configuration. So plan around your intended usable storage, not just a raw maximum capacity figure.

UGREEN

The NASync DXP2800 and DH4300 Plus offer different configurations, with two and four drive bays respectively.

  • UGREEN specifies 2.5GbE for both models.
  • The manufacturer states that the DH4300 Plus is supplied without drives. A network port alone does not determine how quickly your computer can open project folders.

NAS models in an external ranking

The order below is the original ranking from BCC’s NAS buying guide. It is not a ranking of suitability for music production; assess the models based on how you work and your archive needs.

Position Model Key features What to consider for project folders Platform
1 Synology DS223j Two drive bays; the original ranking lists 0 TB. A model to consider for central storage with two drive bays. Work out separately how much usable space you need. BCC
2 Synology BeeStation BST150-4T Built-in drive with 4 TB, according to Synology. A ready-to-use storage option if its fixed capacity and way of working suit your archive. It offers a different expansion route from an enclosure with multiple drive bays. BCC
3 UGREEN NASync DXP2800 Two drive bays and 2.5GbE according to UGREEN; drives must be purchased separately. Compare this model if a two-drive setup suits your current archive and you’ve factored the cost of the drives into your plan. BCC
4 Synology DS725+ Two drive bays, 2.5GbE and optional expansion using a separately available DX525, according to Synology. The expansion option may be useful for an archive that continues to grow. Check drive compatibility for your chosen configuration. BCC
5 UGREEN NASync DH4300 Plus Four SATA drive bays and 2.5GbE according to UGREEN; drives are not included. Compare the four drive bays with your planned archive growth, and remember that you’ll need to choose the drives separately. BCC

Joybuy products for central storage

These Joybuy products are options to compare for central storage and keeping large project folders. Choose your working drive and separate backup to suit the way you work.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

An option to compare for a growing project archive and central file sharing. HDDs must be chosen separately.

Joybuy
Synology DiskStation Intel Celeron J4125 Q

Synology DiskStation Intel Celeron J4125 Q

An option to compare if you’re looking for central storage and file sharing for large project folders. Before buying, check the exact product variant and which drives are included.

Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

An option to compare if you’re looking for central access to a growing project archive.

Joybuy

Frequently asked questions

Can I edit a music project directly from the NAS?

Don’t assume you can. Ableton recommends keeping Live project and media files stored locally. Test your DAW, project and complete network connection before making direct editing your regular way of working; the NAS port alone doesn’t tell you how that setup will perform.

How do I move a session folder without missing any samples?

In Ableton Live, use ‘Collect All and Save’ to gather the media used in the project. PreSonus recommends placing external audio files in the song folder for Studio One. On the other computer, also check that any required sound sets and plug-ins are available.

Is RAID or a snapshot enough as a backup?

No, not as your only recoverable copy. QNAP explains that RAID is not a backup and that snapshots still depend on their storage pool. Make a separate copy and test that you can restore a project; the Dutch Data Protection Authority also recommends that organisations check they can restore backups.

Are hard drives included with a NAS?

It varies by model and product variant. QNAP says the TS-264 is supplied without an HDD; UGREEN says the same about the DH4300 Plus. Before buying, check what’s in the box and whether the drives you choose suit your storage plan.

What should I consider when handling customer projects containing personal data?

If you process personal data as an organisation, assess which GDPR obligations apply to that data. The Dutch Data Protection Authority states that personal data must not be kept for longer than necessary; separate conditions apply to transfers outside the EEA. This does not mean that you are generally required to store personal music projects on a NAS.