Who is a NAS for music projects suitable for?

Producer with irreplaceable sessions

Wants to be able to recover projects before packing up if the NAS or the moving load is lost. A separate copy stored elsewhere is more important here than drive redundancy alone.

Producer who needs to reopen projects

Moving to another computer or workspace and wants to take all the audio files, samples and project references along.

Studio with a growing shared archive

Needs to weigh up drive bays, capacity and network access for files from multiple projects or users.

What should you look for in a NAS before moving?

What to consider What should you check? Who is it most important for?
Recovery if something is lost Check that you can back up to a separate destination and test recovery before packing up. Synology also recommends keeping a backup in another location. If my NAS or the moving load is lost, I want a copy elsewhere that I’ve tested in advance. Among consumers who put recoverability first, around 33% would make it their top buying priority.
Complete projects Check which audio and other assets your DAW includes, then open a recovered project folder before moving. When I open a session at my new workspace, I don’t want to find that audio files are missing. Around 27% of consumers would make project completeness their top buying priority.
Transfer over the network Check the connection between the NAS, computer and any network equipment in between. ASUSTOR notes that its performance tests were carried out under optimised conditions. If I need to transfer lots of project data before moving day, I want to know whether my network can make the most of the NAS. Transfer speed would be the top priority for around 20% of consumers.
Capacity and growth Add up the sizes of your complete project folders and estimate future growth separately. Then compare the usable capacity and number of drive bays on each model. If my project archive continues to grow after the move, I want to know how much space I can actually use. Around 20% of consumers would make room to grow their top buying priority.

Common buying mistakes

  • Assuming RAID or snapshots are a complete moving backup

    If the NAS is lost along with the moving load, the copies stored on it could be lost too.

    Keep your recovery copy physically separate from the moving load, and try restoring a project before you pack up.

    A separate backup destination requires extra storage and time to run a recovery test.

  • Moving only the DAW project file

    A project may refer to audio files stored elsewhere. Ableton also notes that plug-ins aren’t copied with the project and must be installed separately on the new computer.

    Gather the files you need according to your DAW’s instructions, then open a recovered session before clearing out your old workspace.

    Gathered audio may need extra storage space, and reinstalling plug-ins takes time.

  • Comparing a NAS enclosure as if the drives are included

    QNAP states that the TS-264 is supplied without HDDs. Check what’s included with each model and offer.

    Also check the compatibility list for the exact NAS model, and include a separate backup destination in your storage plan.

    You may need compatible drives and external backup storage in addition to the enclosure.

  • Assuming manufacturer speed claims match your own network

    ASUSTOR says its performance figures were measured using optimised network and computer settings, and may differ in other environments.

    Check the connection between your computer and NAS, and allow plenty of time for the first full copy.

NAS brands with relevant models

Synology

The DS225+ has two drive bays, while the DS925+ has four and supports expansion options. These are examples for different capacity needs, not a judgement on the entire range.

  • Synology provides guidance on backing up to other destinations.
  • Check the compatibility list for the exact model; Synology notes that support may be more limited if problems occur with unlisted drives.

QNAP

The TS-264-8G has two drive bays and two 2.5GbE ports. This connection is most relevant if the rest of your network is set up to support it.

  • QNAP lists two SATA drive bays and two 2.5GbE ports for the TS-264-8G.
  • QNAP states that the TS-264 is supplied without HDDs and emphasises that RAID is not a separate backup.

ASUSTOR

The DRIVESTOR 2 Pro Gen2 (AS3302T v2) is a two-bay model with 2.5GbE and Btrfs snapshots, according to ASUSTOR.

  • Snapshots may be useful if you want to restore earlier file versions, provided they’re configured correctly.
  • Snapshots don’t replace a copy on another destination. ASUSTOR states that its performance figures come from optimised laboratory conditions.

UGREEN

According to UGREEN, the NASync DXP2800 is a diskless two-bay model with 2.5GbE and storage and backup features.

  • The manufacturer states that third-party drives are supported.
  • Check the compatibility list and arrange a separate backup destination; snapshots or backup features on the NAS aren’t, on their own, a copy stored elsewhere.

NAS options on Joybuy

This selection features Synology NAS enclosures with multiple internal drive bays for a central project archive. Before buying, check the drive configuration you need and arrange a separate backup destination too.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+

Suited to a central archive that needs multiple internal drive bays; a separate backup is still essential.

The Joybuy product description lists five drive bays, expansion to 15 drives and two 2.5GbE ports.

Hard drives must be chosen separately.

View on Joybuy
Synology DiskStation DS925+ without hard drives

Synology DiskStation DS925+, without hard drives

Suited to a growing archive where four internal drive bays are useful; expansion doesn’t replace a backup stored elsewhere.

Synology lists four drive bays and expansion options for the DS925+; the product specifications state that it has two 2.5GbE ports.

This version is supplied without hard drives.

View on Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Suited to a project archive that needs eight internal drive bays; plan for a separate, recoverable copy as well.

The Joybuy product description lists eight drive bays, an expansion option and two 2.5GbE ports.

View on Joybuy

Frequently asked questions

Can I just copy the project files to the NAS before moving?

Not without checking where your DAW stores the audio you’ve used. Ableton recommends using ‘Collect All and Save’ and copying the entire project folder; plug-ins aren’t included in the project folder this way. Logic Pro can copy assets into the project or link to them in their existing location.

Is a NAS with two mirrored drives all I need for a moving backup?

No. RAID doesn’t, on its own, protect against losing the entire NAS or accidentally deleting files. Keep a recoverable copy in another location too, and test it before moving.

Do I need to factor hard drives into the cost of the NAS enclosure?

Check what’s included in the exact offer. QNAP states that the TS-264 is supplied without HDDs; the Joybuy product listing for the Synology DS925+ also states that it’s supplied without hard drives. Check drive compatibility and the cost of a separate backup destination too.

What privacy rules apply to client files on a studio NAS?

If an organisation processes personal data, it must protect it appropriately based on the risks. The Dutch Data Protection Authority emphasises that suitable measures depend on the data and how it’s processed; not every example applies to every studio.

Can I store or share other people’s music on the NAS?

Keeping music for your own use and sharing it with others aren’t the same thing. The Dutch Government states that you may make a private copy for your own use, but you may not distribute or make it publicly available. So owning a NAS doesn’t give you the right to share other people’s music.