If you regularly revise a manuscript, choose a NAS backup with version history that you can restore, and test the recovery process before relying on it. A single drive bay can provide an extra copy; two bays with mirroring can help you keep working if one drive fails. Mirroring is no substitute for a separate copy stored outside the NAS.
Who is this NAS setup for?
Writers who want to recover earlier versions
If you regularly edit a manuscript, you’ll want to restore an earlier version after deleting or overwriting text, rather than simply synchronising files. The National Cyber Security Centre in the Netherlands recommends carrying out an actual recovery test, too.
Writers with limited desk space
If you’re planning to keep the NAS near your workspace, compare its dimensions and check how noisy it is under relevant operating conditions. Manufacturers sometimes quote a noise level measured under specific test conditions; this doesn’t automatically indicate how noisy the device will be during a backup.
Writers weighing up the complete setup
Consider the enclosure, the drives you need and a separate backup destination as part of the same decision. The National Cyber Security Centre in the Netherlands recommends keeping data copies on more than one device.
What should you look for in a NAS for manuscripts?
First, decide how you’ll restore an earlier version of your manuscript and test the process. Then consider the number of drive bays and how much desk space you have. The National Cyber Security Centre in the Netherlands recommends testing your backup in practice.
NAS with one drive bay
A good fit if: you mainly want an automatic extra copy of your manuscript and will also arrange a separate backup.
Trade-off: there’s no second internal drive to keep your files available if the first one fails.
NAS with two drive bays
A good fit if: you want to keep working if one drive fails, using a supported mirroring configuration.
Trade-off: two drives take up extra space. Mirroring stays within the same device and isn’t a separate backup.
| What to consider |
What should you check? |
Who should prioritise this? |
| Restoring earlier versions |
Check automatic backups, version history and whether you can restore a test file. |
If I overwrite a chapter, I want to be able to restore an earlier version. Around 36% of consumers prioritise version recovery. |
| A copy in case of failure or loss |
Decide whether you need mirroring, and arrange a separate copy outside the NAS as well. |
If the NAS or its location is affected, I want another copy to recover from. Around 29% of consumers prioritise protection against device or location loss. |
| Desk space and noise |
Measure the space, including room for cables; only assess noise ratings alongside their test conditions. |
If the NAS is beside my workspace, I want to know whether it will fit and how noisy it will be in use. Around 21% of consumers prioritise desk space. |
| The complete setup |
Compare the enclosure, the drives you need and a separate backup destination; check the usable storage after mirroring. |
If I’m putting together the complete setup, I want to factor in the components and storage space I’ll need. Around 14% of consumers prioritise the total cost. |
Common pitfalls
-
Assuming mirrored drives count as two separate backups
Mirroring can keep files available if one drive fails, but both drives are in the same device. If the NAS is lost, both copies could be affected.
Arrange a separate copy in another location as well, and test that you can restore a file from it.
-
Confusing synchronisation with restoring an older version
An up-to-date copy won’t automatically include the text as it was before it was overwritten. The version history available depends on the backup or snapshot feature you’ve configured.
Check which versions are kept and restore a test version to make sure the text is readable.
-
Treating an idle noise rating as the noise level during backups
ASUSTOR lists a noise level of 18,6 dB for the AS1102T with an idle HDD. This test condition doesn’t indicate how noisy the NAS will be while writing data to your drives.
Compare the test conditions and consider how noisy your chosen drives will be in use.
Brands to consider
Synology
The DS124 has one drive bay, while the DS223 has two. Synology describes scheduled folder backups for the DS124 and Btrfs snapshots for the DS223.
- Depending on the model you choose, the features offer different options for an extra file copy or snapshots.
- These are manufacturer descriptions for specific models, not the results of independent recovery tests. Check the settings and keep a separate copy as well.
QNAP
According to QNAP, the TS-233 has two drive bays, a gigabit Ethernet port and snapshot features.
- QNAP lists the enclosure dimensions as 186 × 91,7 × 157,6 mm, excluding any optional feet.
- The manufacturer’s description of snapshots doesn’t mean a separate backup is unnecessary. Also check that the connection is compatible with your network.
ASUSTOR
According to ASUSTOR, the Drivestor 2 AS1102T has two drive bays and a 2.5-gigabit Ethernet port.
- ASUSTOR lists dimensions of 165 × 102 × 218 mm and a noise level of 18,6 dB with an idle HDD.
- The idle noise rating doesn’t predict how noisy the NAS will be during a backup. Consider the network port alongside your other equipment.
Joybuy products
Related products will be available soon.
Frequently asked questions
Is a mirrored NAS automatically a complete backup of your manuscript?
No. Mirroring can keep files available if one drive fails, but it doesn’t protect against losing the entire device. Keep a separate copy in another location as well, and test that you can restore a file from it.
How can you check after installation that you can restore a chapter?
Run the backup you’ve configured and restore a test file. Open it to check that the text is readable. The National Cyber Security Centre in the Netherlands describes carrying out a recovery test as part of testing a backup.
If your NAS breaks, should you only contact the manufacturer?
No. According to the Dutch government, the seller must provide a solution if a product is faulty. The Netherlands has no fixed statutory guarantee period; a manufacturer’s guarantee is in addition to your statutory rights.
Does the GDPR apply to information about other people in your manuscript?
That depends on how it’s used. The Dutch Data Protection Authority describes an exemption for processing carried out solely for personal or household purposes. For professional or commercial use, don’t assume that the exemption applies; the content and use of the manuscript are relevant.