Who is this relevant to?

Designers working on large projects

If you want to store large working files centrally and access them from a workstation, you’ll need to consider both storage capacity and the network connection.

Designers who need to be able to restore a final delivery

If you want to be able to restore an earlier version or a backup before handing over your work, plan for a separate backup as well as the NAS. The National Cyber Security Centre warns that drive redundancy alone isn’t enough.

Teams handing files over to clients

A shared workspace needs access permissions for colleagues and a considered approach to sharing with clients. The Dutch Data Protection Authority advises checking documents carefully before sharing or publishing them.

What should you look for?

Start by working out how much usable storage you need and which files you want to be able to restore. Then check that your network and access settings suit your day-to-day work and client handovers.

What to consider What to check before you buy Who is this important for?
Storage and local file transfers Calculate the usable storage you’ll need for projects and versions. Check the connections on the NAS and computer, the switch, and drive compatibility. If you want to open and transfer large active files from your workstation, storage and the entire network setup matter. This is the primary purchasing need for around 33% of consumers.
Restoring the final delivery Check the version recovery options, plan a separate backup and test that you can restore a file. If you need to be able to recover from an error or data loss just before delivery, drive redundancy alone isn’t enough. Around 27% of consumers prioritise recovery.
Sharing files with clients Decide which files the client needs and set access permissions for each user. Check documents for hidden personal data. If a client should only receive specific files, restricting access is more important than using a general shared folder. Around 20% of consumers prioritise controlled client access.
Room to grow and a complete setup Compare the number of drive bays and compatible drives. Also factor in any expansion options, networking equipment and a separate backup. If you expect to need more space for projects, weigh up expansion options against the components needed for a complete setup. Around 20% of consumers’ primary need is room to grow and the right combination of components.

Common pitfalls

  • Relying on RAID or snapshots as your only backup

    RAID can help keep your system available in the event of certain drive problems, but the National Cyber Security Centre stresses that RAID is no substitute for a backup. Snapshots are also part of a recovery plan that you need to test.

    Plan a separate backup and test that you can restore a final delivery file before handing it over.

  • Assuming raw storage capacity or port speed reflects real-world performance

    Usable capacity depends on your chosen drive configuration. A fast network connection alone won’t tell you how quickly files will open on your workstation or transfer to it.

    Compare a complete setup of drives and networking equipment, not just the figures for the NAS enclosure.

  • Giving a client direct access to your NAS

    Internet access can increase security risks, and incorrectly configured permissions could make files accessible to more people than intended.

    Choose carefully how to hand over files, restrict access to the users and files that need it, and check documents before sharing them.

Brands to compare

Synology

The models listed offer options ranging from two drive bays on the DS225+ to four on the DS925+ and five on the DS1525+.

  • Synology lists built-in 2.5GbE ports on these models.
  • For the DS1525+, Synology lists a separately sold module as an option for 10GbE.
  • Manufacturer figures for capacity and throughput depend on the configuration and test environment. Check drive compatibility for the exact model.

QNAP

The TS-464 is a four-bay model for central storage, backup and collaboration.

  • QNAP lists two built-in 2.5GbE ports, M.2 options and snapshots.
  • The advertised combined throughput assumes port trunking and isn’t the same as the speed of a single standard connection. Drives are sold separately.

ASUSTOR

The Lockerstor 4 Gen3 AS6804T is a four-bay model with connections for a compatible high-speed network.

  • ASUSTOR specifies two 10GbE ports, two 5GbE ports and M.2 slots.
  • Published throughput figures are the manufacturer’s laboratory results and may not be achievable in a typical workspace.

UGREEN

The NASync DXP4800 Plus is a four-bay model with 10GbE and 2.5GbE for central storage.

  • UGREEN lists compatibility with external drives.
  • Check the compatibility list before choosing your drives; they’re sold separately. Claims about transfer speeds and ease of use aren’t guaranteed for your particular setup.

NAS models at Joybuy

These NAS models are designed for central storage of design files. Check each model’s drive configuration, network requirements and expansion options.

Synology DiskStation DS925+ NAS without hard drives

Synology DiskStation DS925+, without hard drives

A four-bay model for storing large projects centrally. The connection to your workstation and network also affects how files are transferred.

Four drive bays and two 2.5GbE ports. Hard drives not included.

View at Joybuy
Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+

A model for managing centrally stored projects, if you’re weighing up five drive bays against your current storage needs.

Five drive bays and two 2.5GbE ports. Synology lists the 10GbE upgrade module as sold separately; hard drives not included.

View at Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+

A NAS option for anyone weighing up central storage for large projects against the drive configuration and network setup required.

10GbE is listed as optional in the product information, not as a built-in connection. Check which configuration and expansion options suit your needs.

View at Joybuy

Frequently asked questions

Is RAID enough to protect files just before delivery?

No, RAID is no substitute for a separate backup. The National Cyber Security Centre advises keeping backups and checking that you can actually restore your files.

What should I check during the initial setup?

Set appropriate permissions for each user and consider carefully whether internet access is necessary. The National Cyber Security Centre warns about the risks of a NAS being directly accessible over the internet.

What do I need to buy in addition to the NAS enclosure?

Check whether drives are included and whether the expansion options you want are sold separately. The DS925+ product listing specifies a model without hard drives; Synology lists the expansion unit for the DS925+ and the 10GbE module for the DS1525+ as sold separately.

Can I share client files containing personal data via a NAS?

Using a NAS isn’t prohibited in itself, but if your organisation processes personal data, the Dutch Data Protection Authority says you must take appropriate security measures based on the risks. Check documents before sharing them, and assess the role of any external services separately.

When do I need a data processing agreement?

According to the Dutch Data Protection Authority, a written data processing agreement is required when you engage a processor to process personal data. Buying a NAS alone doesn’t automatically mean you’re engaging an external processor; assess the actual role of any cloud or managed services.