Designer with a small desk
You want to store large project files centrally without giving up too much workspace. Remember to allow room for cables and ventilation when checking whether the NAS will fit.
Start by considering how much space you can spare, how much usable storage you need, and whether you’ll actively edit files over the network or mainly archive them. A two-bay NAS usually takes up less space; four bays give you room for more drives but require a larger enclosure. Before you decide, also check the network connection, drive compatibility and provision for a separate backup.
You want to store large project files centrally without giving up too much workspace. Remember to allow room for cables and ventilation when checking whether the NAS will fit.
You want enough usable storage and are thinking about expanding later. Compare the number of drive bays and factor in the capacity left for files with your chosen RAID configuration.
You regularly open or move large files, so you’ll want to check the network connections on the NAS and computer, as well as the rest of your network.
Choose this if: desk space is limited and the usable capacity of two compatible drives is enough.
Trade-off: with RAID 1, usable capacity is equal to that of the smallest drive, according to the Synology Knowledge Centre.
Choose this if: you expect your archive to need more drives and have room for a larger enclosure.
Trade-off: more bays don’t automatically mean higher speeds or better data protection, and the enclosure takes up more space.
| What to consider | What to look for when buying | Who should pay particular attention? |
|---|---|---|
| Desk space | Compare the height, width and depth of the exact model, and allow room for cables and ventilation. | If space is limited, I want to know in advance whether the NAS will fit with its connections and enough clearance around the enclosure for airflow. Around 28% of consumers prioritise the desk space required. |
| Usable storage and expansion | Add up your current files and expected growth; check the number of drive bays, compatibility and the capacity available with your chosen RAID configuration. | For a growing design archive, I want to leave enough room for projects, even if the drives are mirrored. Around 28% of consumers prioritise usable archive space. |
| Network for large files | Check the connections on the NAS and computer, as well as the switch and cabling; work out whether you’ll edit files directly or mainly copy them. | If I regularly open or move large files, I want my whole network setup to suit the way I work. Around 22% of consumers prioritise working over a network. |
| File retention and security | Plan a separate backup and check that files can be restored; check for software updates and secure access. Organisations that process personal data have security obligations. | For important project files, I want to know how to restore them and who can access them. Around 22% of consumers prioritise file retention and security. |
With RAID 1, usable capacity is equal to that of the smallest drive, not the combined capacity of two drives. The Synology Knowledge Centre describes this mirroring as a configuration that provides data redundancy.
Before choosing a model, calculate how much space will be left for files with your chosen drives and RAID configuration.
If mirroring leaves you with less space than you need, you may need an additional or larger compatible drive.
RAID features and a separate recovery copy serve different purposes. Mirroring is no substitute for a backup stored in a separate location.
Plan for a separate backup in addition to the NAS, and regularly check that you can restore files from it.
Also allow time to carry out recovery checks.
Speed depends on your entire network setup. A 2023 real-world test by Hardware Info measured around 250 MB/s using a specific hard drive and a computer with a multi-gig network card; that result won’t necessarily apply to other configurations.
Check the connections on the NAS and computer, as well as the switch and cabling. Only compare test or manufacturer figures with your own setup if the stated test conditions match.
You may also need other network equipment to support a suitable connection.
The DS225+ is a two-bay model with one 2.5GbE port and features for file management and backup.
The TS-464 has four drive bays, offering more room for physical expansion to weigh up against its larger enclosure.
The NIMBUSTOR 2 Gen2 (AS5402T) combines two drive bays with two 2.5GbE ports and M.2 options.
The F2-424 has two drive bays; the stated width of the enclosure is 119 mm.
Not with RAID 1: according to the Synology Knowledge Centre, usable capacity is then equal to that of the smallest drive. First work out how much storage you need and what level of protection against drive failure you want.
First check whether drives are included and compatible. The QNAP TS-464 is supplied without hard drives, according to its model specifications; the DS225+ manual explains how to connect the power and network cables and install drives.
Check for updates through the management interface or with the manufacturer, and enable automatic updates where possible. Secure the administrator account too, and test whether you can restore a separate backup.
For a distance purchase from a business as a consumer, the Netherlands Authority for Consumers and Markets (Rijksoverheid) generally provides a 14-day cooling-off period. The Netherlands has no fixed statutory warranty period, but you are entitled to a product that works properly, and the seller is your point of contact if something goes wrong. If you’re buying for business, don’t assume the same consumer rights apply.
If your organisation processes personal data, the Dutch Data Protection Authority (Autoriteit Persoonsgegevens) requires you to protect it appropriately, based on the risks. This doesn’t prove that a particular NAS model on its own is GDPR-compliant.