Who should consider a NAS for CAD projects?

Designer with a growing CAD archive

If you’re storing more and more completed and ongoing projects, consider the usable capacity and options for adding storage later. For example, Synology describes expansion options for the DS925+ and DS1525+.

Designer who needs to preserve project files

If you need to be able to restore files after mistakes or incidents, you’ll need a separate backup plan as well as central NAS storage. The National Cyber Security Centre stresses that a NAS is not a substitute for a backup.

Team sharing CAD files

Teams should check that file permissions, locking and their CAD software are compatible with the chosen storage method. Autodesk sets out specific network requirements for Revit worksharing and potential issues with AutoCAD file locking.

What should you consider when choosing a NAS?

First compare usable capacity and expansion options. Then check that the NAS fits your backup plan and the way your team works together. A network port or RAID configuration alone won’t tell you whether a particular CAD workflow is suitable.

What to consider What should you check? Who should take this into account?
Room to grow Compare the current size of your projects and their expected growth with the usable capacity. Check the number of free drive bays, compatibility and the model’s expansion rules. If I want to keep my growing project archive, I’ll look at usable capacity and a practical way to expand it; around 29% of consumers prioritise room to grow.
File recovery Decide which projects and versions you need to be able to restore, and where you’ll keep a separate backup. If I want to be able to restore project files after mistakes or loss, I’ll plan a separate backup alongside the NAS; around 29% of consumers prioritise recoverability.
Collaborating on files Check the CAD software’s requirements, user permissions and file locking for your specific workflow. Autodesk describes file-based Revit worksharing as being designed for a local network. If my team shares the same CAD files, I’ll want to know whether our software supports simultaneous work and file locking properly; around 24% of consumers prioritise collaboration.
Network connection Check the connections on the NAS, workstations and other network equipment. Manufacturer specifications don’t measure performance for your own CAD workflow. If I regularly open or move project files, I’ll want the whole network connection to be suitable for the task; around 18% of consumers prioritise network transfer speeds.

Common mistakes when using NAS storage for CAD

  • Counting raw terabytes as immediately usable project space

    Usable capacity depends in part on the drives and the RAID configuration you choose. Synology explains that expanding a storage pool depends on adding or replacing drives.

    Plan the capacity you’ll need for your chosen drives and configuration, and check how pool expansion works in advance.

    An expansion unit and additional drives may need to be purchased separately.

  • Assuming RAID is a backup

    RAID can help maintain availability if a drive fails, but it isn’t a separate backup. The National Cyber Security Centre recommends keeping important data in multiple places.

    Decide which files and versions you need to be able to restore, and choose a backup destination outside your primary storage.

    A separate storage destination or service requires additional setup and management.

  • Assuming a shared NAS folder supports every CAD feature

    Autodesk describes network requirements for Revit worksharing and potential problems with AutoCAD file locking on network storage. A shared folder alone doesn’t confirm that your intended workflow will work.

    Check your specific CAD workflow and ask your storage provider whether it supports the required protocols and file locking.

    Depending on your workflow, you may need additional setup or a different collaboration solution.

  • Assuming a fast NAS port means fast CAD performance

    The NAS connection is just one part of the link to your workstation. Manufacturer speed claims don’t measure your complete CAD workflow.

    Consider the connection as a whole and don’t treat quoted throughput as a CAD benchmark.

    A network upgrade may require additional equipment or a separate network card.

Brands to consider for a growing CAD archive

Synology

The DS925+ has four drive bays, while the DS1525+ has five. According to Synology, both models offer expansion options.

  • The DS925+ can be expanded with a separately sold DX525; according to Synology, the DS1525+ supports two DX525 units.
  • Check drive compatibility and configuration. An expansion unit and the required drives are sold separately.

QNAP

The TS-464 has four drive bays and two built-in 2.5GbE ports.

  • QNAP lists an optional PCIe network card for a 10GbE upgrade.
  • The network card is sold separately. Quoted transfer speeds depend on the configuration and don’t measure CAD performance.

TerraMaster

According to the manufacturer, the F4-424 has four drive bays, two 2.5GbE ports and M.2 slots.

  • TerraMaster lists several RAID options for this model.
  • The transfer test quoted by TerraMaster is based on four specific drives in RAID 0 and doesn’t describe a redundant CAD storage configuration.

ASUSTOR

The Lockerstor 10 Gen3 (AS6810T) is a model with ten drive bays and built-in 10GbE connections.

  • ASUSTOR specifies two 10GbE ports and four M.2 slots.
  • The throughput figures shown by ASUSTOR are laboratory results; the manufacturer warns that standard computers may not reproduce them.

UGREEN

According to UGREEN, the NASync DXP4800 Plus has four drive bays and built-in 10GbE and 2.5GbE connections.

  • The connections listed offer different networking options to match with the rest of your equipment.
  • The manufacturer states that drives are sold separately.

NAS models on Joybuy for growing project archives

These NAS models are suited to storing a growing project archive. If you plan to collaborate on CAD files, separately check that your chosen configuration works with your software and network.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

An option for storing a growing project archive centrally, with room to expand later.

Starts with five drive bays and, according to Synology, supports expansion to a maximum of 15 drives with two separately sold DX525 units. Check drive compatibility; drives are not included.

Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+ NAS

A NAS option if you’re considering central storage for a growing project archive.

Before buying, check the usable capacity, expansion options and compatibility of your chosen drives. Also plan a separate backup.

Joybuy
Synology DiskStation DS925+ NAS without hard drives

Synology DiskStation DS925+ NAS, without hard drives

An option if you want to start with four internal drive bays and keep the option to expand.

Synology states that it supports expansion to a maximum of nine drives with a separately sold DX525. Hard drives are not included; check compatibility.

Joybuy

Frequently asked questions about NAS storage for CAD

Is a four-drive NAS enough as your project collection grows?

It depends on your current data, expected growth, drive sizes and RAID configuration. Compare the usable capacity with your needs and check in advance whether you can expand the storage pool with additional or larger drives.

Can you collaborate on Revit projects remotely through a NAS?

Don’t assume that you can. Autodesk describes file-based Revit worksharing as being designed for a local network and warns of higher latency. Before using it over a WAN, the internet or a VPN, check the other collaboration solutions recommended by Autodesk.

Are RAID and snapshots enough as a backup?

No, RAID is not a substitute for a separate backup. The National Cyber Security Centre recommends keeping backups of important data. Decide which project files you need to be able to restore, and keep copies outside your primary storage too.

Will a shared NAS folder automatically work well for AutoCAD files?

Not necessarily. Autodesk explains that file locking can cause problems with some network storage configurations. Test your specific workflow with your team and check that the NAS and network support the required file locking.

What should you set up first after installing the NAS?

Set access permissions carefully, change the default management and password settings, and decide whether you need internet access. These are security recommendations from the National Cyber Security Centre; they don’t mean that a NAS model is automatically secure.