CAD user with limited shelf space
You want to keep projects in one central place without having to make room for a large enclosure. Check the external dimensions, number of drive bays and space needed for ventilation and connections.
A compact two-bay NAS could be a good fit if it fits on your shelf and offers enough capacity. However, that doesn’t automatically make it suitable for working directly on CAD projects over a network. Autodesk Support says NAS and SAN storage are outside the supported storage environments for AutoCAD. For Revit, check that the solution you’re considering supports SMB and Windows networking. Measure your available space, test your own CAD workflow and, alongside RAID or version control, plan a separate backup that you can restore from.
You want to keep projects in one central place without having to make room for a large enclosure. Check the external dimensions, number of drive bays and space needed for ventilation and connections.
You’re looking for a practical way to share drawings, references or central models. Network and application support must suit the CAD workflow you choose.
You prioritise restoring project files and having enough capacity for the future. You’ll also need to make room for the NAS and a separate backup.
A good fit if: two drives provide enough capacity and the enclosure fits on your available shelf.
Bear in mind: mirroring reduces usable capacity and is no substitute for a separate backup.
A good fit if: you expect your project archive to need more capacity than a suitable two-drive configuration can provide.
Bear in mind: the larger enclosure and drives take up more space.
A good fit if: CAD files are slow to open or save over the network, or your planned shared workflow doesn’t work reliably.
Bear in mind: working locally calls for a clear approach to version control, synchronisation and recovery.
| What to consider | What to look for | Who should consider it? |
|---|---|---|
| Fit and capacity | Measure your shelf, allowing room for cables and ventilation. Calculate the usable capacity for your chosen drives and storage layout. | I want the NAS to fit on my shelf while still having enough room for my projects. Around 31% of consumers give compact placement their highest priority. |
| CAD workflow | Test representative files and external references. For Revit, check SMB support and discuss your planned workflow with the supplier. | If I use drawings with references or shared models, I want to know in advance whether they’ll work with my network setup. Around 25% of consumers put their CAD workflow first. |
| Project recovery | Check version control and backup to a separate destination. Test whether you can actually restore a project. | I want to be able to restore older project files after an error or attack, not just have a copy on the same NAS. Around 25% of consumers prioritise recovery. |
| Room to grow | Compare expected project growth with usable capacity and the number of drive bays. Also measure the external dimensions of a larger NAS. | I want to avoid outgrowing the capacity of my chosen setup as my project archive expands. Around 19% of consumers prioritise future growth. |
The port is just one part of the connection. Autodesk Support describes issues with network files in AutoCAD, including freezes with certain files that use external references.
Test representative projects, including external references, on the workstations you plan to use before basing your choice on port speed.
You may also need to change other network equipment or adjust your workflow.
A copy on the same NAS won’t protect you against every cause of data loss.
Plan a backup to a separate destination and regularly check that you can restore your projects. The Dutch Data Protection Authority advises organisations to test recovery from backups.
Allow space for a separate backup destination and time to test recovery.
The number of drive bays alone doesn’t tell you how much usable capacity your chosen configuration will provide. A model with more bays will also take up more space.
Measure the exact enclosure and calculate capacity based on the drives and storage layout you plan to use.
A larger configuration may require extra drives or a different location for the NAS, connections and backup.
The DS225+ is a two-bay model with a built-in 2.5GbE port, while the DS925+ has four drive bays. This makes them relevant to different space and capacity needs.
The TS-264 combines two SATA drive bays with two 2.5GbE ports and M.2 slots, if those connections are relevant to a two-bay enclosure.
According to ASUSTOR, the AS5402T has two 2.5GbE ports and four M.2 slots alongside its drive bays.
TerraMaster lists two 2.5GbE ports and storage and backup applications for the F2-424.
No—don’t assume you can without testing first. Autodesk Support describes slow performance with network drawings and freezes with certain drawings that use external references on NAS or SAN storage. According to the relevant Autodesk information, this storage falls outside the supported storage environments. Test your own projects, and consider working locally with a managed storage and backup process if editing over the network causes problems.
It depends on the specific storage and network configuration. Autodesk prefers a Windows file server for central models and advises checking with the supplier that any alternative storage solution fully supports SMB and Windows networking. Revit’s file-based worksharing is designed for a LAN; use over a WAN, the internet or a VPN needs a separate assessment.
Back up to a different destination and test that you can genuinely restore project files. The Dutch Data Protection Authority advises organisations to use separate copies and test recovery, among other measures, to protect against ransomware. This is security advice, not a prescribed NAS configuration.
Check whether drives are included, which drives are supported for your chosen model, and where you’ll store a separate backup. QNAP supplies the TS-264 without hard drives; Synology says support is more limited for drives that aren’t on its compatibility list.
If an organisation processes personal data, it must protect it appropriately. The Dutch Data Protection Authority describes this responsibility for organisations. Whether a CAD project contains personal data, and which measures are appropriate, depends on how it is processed. This doesn’t mean there’s a general requirement to choose a particular NAS model or RAID level.