Who is this for?

Videographer with a growing archive

You keep source footage, exports and project versions, and want to plan enough usable space for future backups.

Creator who prioritises recovery

After a long editing session, you want to be able to restore an earlier file version rather than relying only on the drives in a single NAS.

Owner of an existing NAS

You’re adding or replacing a drive and need to check the full model code for compatibility with your NAS series and software version.

What should you look for in a NAS drive for video backups?

Start with the usable capacity your archive and saved versions require. Then check compatibility with your NAS and decide how you’ll restore files and keep a copy in another location.

What to consider What should you check? Who is this important for?
Usable capacity Allow for existing files, expected growth and saved versions. Check how much space your NAS configuration actually makes available. If I want to keep source footage and project versions, the usable space on my NAS needs to suit my archive. Around 29% of consumers put capacity first.
Recovery beyond a single NAS Decide where versions will be kept, where the separate copy will be stored and whether you can restore a file. If I need an earlier version after a mistake or a problem with my NAS, I also want a copy in another location. Around 29% of consumers put recovery protection first.
Backup workflow Check the connections and settings on your computer and NAS, schedule when the copy runs and test restoring a representative project. If I copy large project files after editing, I want the transfer to fit into my workflow. Around 24% of consumers prioritise the transfer workflow.
NAS compatibility Check your exact NAS model, software version and the drive’s full model code. If I’m expanding an existing NAS or replacing a drive, I want to know whether the chosen model is suitable for my system. Around 18% of consumers put NAS compatibility first.

Common pitfalls with NAS backups

  • Assuming a second drive or local version counts as a copy outside your NAS

    A problem with the same NAS or storage system could affect a local copy too. That’s why Synology Knowledge Centre recommends backing up to another location as well as keeping versions on your NAS.

    Plan a separate destination, test restoring a file and allow for the storage space and management needed for versions.

    A separate backup destination and space for versions require extra storage and setup.

  • Assuming all WD Red drives use the same recording technology

    Western Digital distinguishes between WD Red models with SMR and WD Red Plus and Red Pro models with CMR. The exact model matters when comparing drives for write and recovery tasks.

    Check the full model code and specified recording technology, not just the product line name.

  • Applying one Synology compatibility rule to every NAS model

    Compatibility policies vary by NAS series and software version. For certain 2025 DiskStation Plus models running DSM 7.3, Synology describes greater flexibility when using drives from other brands.

    Check your exact NAS model and installed DSM version before choosing a drive.

NAS brands to compare

Western Digital

According to Western Digital, the WD Red Plus range is designed for NAS systems and small to medium-sized environments.

  • Western Digital specifies that WD Red Plus uses CMR, supports up to eight bays and has a rated workload of 180 TB per year.
  • According to Western Digital, the WD Red range without Plus also includes SMR models. Check the exact model code; the stated workload does not predict the speed of your full backup.

Seagate

Seagate offers the IronWolf and IronWolf Pro ranges for NAS use.

  • Seagate rates IronWolf for up to 180 TB per year and IronWolf Pro for up to 550 TB per year. The manufacturer describes IronWolf as suitable for NAS systems with one to eight bays.
  • IronWolf Pro is a separate range for more demanding multi-user environments. These workload figures are specifications for the product range, not a measure of how long your backup will take.

Toshiba

In the EMEA market, Toshiba positions the N300 range for NAS, multimedia storage and archiving.

  • Toshiba lists capacities of up to 22 TB and speeds of 7,200 rpm for the N300 range.
  • The range includes several models. Check the capacity and supported number of bays for each one.

Synology

According to Synology, the Plus Series HDD is designed for Synology systems and offers firmware management through DSM.

  • Firmware management through DSM may be useful if you have a compatible Synology system.
  • Compatibility varies by NAS series and DSM version. Check the requirements for your model; a claim about a product range is not an independent performance comparison.

NAS drives at Joybuy

These models are internal NAS drives for storing video files; the list includes Synology drives and WD Red Plus models.

Synology SATA HDD 6 TB

Synology SATA HDD 6 TB

An option if you’re looking for 6 TB of internal storage for a Synology NAS. Check compatibility with your exact NAS model and DSM version.

Capacity: 6 TB. Connection: SATA.

A drive in your NAS is not a copy in another location, so plan a separate destination for that.

View at Joybuy
Synology SATA HDD 16 TB, 7,200 rpm

Synology SATA HDD 16 TB, 7,200 rpm

For anyone looking for more space for a growing video library in a Synology NAS. Check compatibility with your exact NAS model and DSM version.

Capacity: 16 TB. Rotational speed: 7,200 rpm. Connection: SATA.

A drive in your NAS is not a copy in another location, so plan a separate destination for that.

View at Joybuy
WD Red Plus 6 TB with 256 MB cache

WD Red Plus 6 TB (256 MB cache)

An option if you’re looking for a 6 TB WD Red Plus NAS drive. Check that the exact model is suitable for your NAS and intended use.

Capacity: 6 TB. Cache: 256 MB.

A drive in your NAS is not a copy in another location, so plan a separate destination for that.

View at Joybuy
Western Digital WD Red Plus 8 TB, CMR, SATA 6 Gb/s

Western Digital WD Red Plus 8 TB

For anyone looking for an 8 TB WD Red Plus model for a NAS. Check the full model code and compatibility with your NAS.

Capacity: 8 TB. Recording technology: CMR. Rotational speed: 5,640 rpm. SATA: 6 Gb/s. Cache: 256 MB.

A drive in your NAS is not a copy in another location, so plan a separate destination for that.

View at Joybuy

Frequently asked questions

Is RAID in your NAS enough to back up your editing files?

No. Don’t rely solely on storage in the same NAS. Synology Knowledge Centre warns that a RAID problem or drive failure can also lead to data loss, and recommends keeping a backup in another location too.

How can you make a recoverable backup after an editing session?

First decide which project files and versions you want to be able to restore. On compatible Synology systems, options include Hyper Backup and, on certain models, Snapshot Replication; availability depends on the model and destination. Once you’ve set it up, test that you can actually restore a file.

Will any NAS drive work in a Synology NAS from 2025 or later?

No, the policy isn’t the same for every series. Synology sets out which drives are suitable for each product series and software version. With DSM 7.3, 2025 DiskStation Plus models gained greater flexibility for using drives from other brands when creating storage pools. So check your exact NAS model and DSM version.

Are you always entitled to exactly two years’ legal guarantee on a NAS drive in the Netherlands?

No. According to the Dutch government, the Netherlands has no fixed statutory guarantee period. What you can expect from a product depends, among other things, on the product and the sales information. Check any manufacturer’s guarantee separately.