Choose a NAS drive that’s compatible with your exact NAS model and offers enough usable space for your projects and the versions you want to keep. RAID can protect against certain drive failures, but it isn’t a separate backup, so plan an additional backup destination and test that you can restore your files. If you also use a NAS for active, shared Revit work, assess that workflow separately from your backup drive.
Who should consider this?
Architects who prioritise recovery
Want to restore an earlier usable model version after a mistake, ransomware incident or hardware failure. The National Cyber Security Centre and Synology describe backups as a way to recover data, so make sure you have more than one backup destination.
Architects with a growing model archive
Store projects and versions, and need to match the NAS’s usable capacity to their current files and expected growth. Western Digital and Toshiba offer NAS drives in a range of capacities, so first work out how much data and how many versions you want to keep.
Architects with an existing or shared NAS
Need to choose a drive that suits their specific NAS, or distinguish backups from collaboration on an active model. Autodesk makes the same distinction for file-based Revit worksharing.
What should you look for?
First, check that the drive’s full model code is compatible with your NAS. Then work out how much usable space you need and how you’ll create separate, recoverable backups.
| What to consider |
What should you check? |
Who is this for? |
| Recoverable backups |
Check version history, a copy to another destination and whether you can restore a file. |
If I need an earlier project version after overwriting or deleting a file, or following an incident, I don’t want to rely on RAID alone. Around 33% of consumers prioritise recovery. |
| Space for models and versions |
Take stock of your project files and the versions you want to keep, then calculate the NAS configuration’s usable capacity. |
As my project archive grows, I want enough room for my files and the versions I want to keep. Around 27% of consumers prioritise archive space. |
| NAS compatibility |
Compare the drive’s full model code, connection and capacity with the compatibility information for your exact NAS model. |
If I’m replacing a drive in my existing NAS, I want to know in advance whether this specific variant is supported. Around 20% of consumers prioritise compatibility. |
| Backups from different work locations |
Check when the backup task runs and distinguish it from active shared Revit work over the internet or VPN. |
When I work from different locations, I want to know whether the scheduled backup includes the files on my workstation. Around 20% of consumers prioritise a mobile workflow. |
Common buying pitfalls
-
Assuming two mirrored drives count as a complete backup
An incident affecting the NAS or its data could affect both mirrored drives. Synology explains that data loss can still happen with a RAID setup.
Keep versions and make a copy to a separate destination as well. Test that you can restore that copy, too.
A separate destination requires additional storage and management, alongside the NAS itself.
-
Choosing based on the product family name alone
Drive specifications can vary between variants, and compatibility depends on the NAS. A matching product family name doesn’t confirm that the full model code is compatible.
Check the drive’s full code against the compatibility information for your exact NAS model.
-
Expecting a faster drive to solve remote Revit worksharing issues
With file-based worksharing over a WAN, the internet or VPN, network latency and protocol support can also play a part. Autodesk warns of a higher risk of timeouts, failed operations and file corruption.
Assess the backup task and hosting an actively shared model as separate uses.
NAS drive brands to consider
Western Digital
WD Red Plus is an internal NAS drive range designed for settings including home offices and small to medium-sized businesses. Always compare the capacity and full model code.
- Western Digital lists CMR recording technology for WD Red Plus, along with a rating for NAS systems with up to eight bays and a workload of 180 TB per year.
- The WD Red name without ‘Plus’ doesn’t confirm the same recording technology. Check the exact variant and its compatibility with your NAS.
Seagate
IronWolf is a NAS drive range that Seagate positions for small business and multi-bay NAS environments, among others.
- Seagate’s data sheet lists CMR and a workload of 180 TB per year for the models included.
- The availability and terms of the health and recovery services described vary by model, NAS and country. These services don’t replace a separate backup.
Toshiba
Toshiba positions N300 as an internal SATA drive range for NAS use; capacities and specifications vary by model.
- Toshiba’s data sheet for model MN11ACA22TS lists CMR and specifies the 22 TB variant.
- The specifications for this 22 TB variant don’t automatically apply to every N300 capacity. Match your chosen capacity to your archive and check the model code.
Joybuy product picks
These options are intended for storing project files and backup versions on a NAS. Check the connection type and compatibility with your NAS for each model.
No image available
Synology SATA hard drive, 16 TB, 7,200 rpm
Worth considering if you’re looking for storage for project files in a Synology NAS.
16 TB capacity and 7,200 rpm according to the product name; the description lists SATA 6 Gb/s, CMR and 512 MB cache.
View at Joybuy
No image available
WD Red Plus, 6 TB, 256 MB cache
Worth comparing if you’re looking for an internal drive to store projects and versions on a NAS.
The product information lists SATA III, 3.5-inch, 5,400 rpm and a workload rating of up to 180 TB per year. Check that your NAS supports the full variant.
View at Joybuy
No image available
Western Digital WD Red Plus, 8 TB
Worth comparing if you’re looking for a WD Red Plus drive for NAS backups of projects and versions.
The product name lists 5,640 rpm, SATA 6 Gb/s, CMR and 256 MB cache. Check the full model code and NAS compatibility before choosing.
View at Joybuy
Frequently asked questions
Does RAID replace a backup to a separate destination?
No, RAID doesn’t replace a separate backup. Synology warns that data loss can still happen when storage is on the same NAS, so keep a copy in another location and test that you can restore it.
Can I connect an internal NAS drive directly to my mobile workstation?
The NAS drives discussed here are internal drives, not ready-to-use portable USB drives. For network backups, you’ll need a suitable NAS and a configured backup task.
How can I check that I can really restore a project file?
Check the status of the backup task and test restoring a project file or version. The National Cyber Security Centre recommends testing backups so you know recovery will work when you need it.
Can a NAS also host the active central Revit model?
That’s a different consideration from storing a backup. Autodesk warns that file-based Revit worksharing over a WAN, the internet or VPN can increase the risk of errors and file corruption. Also check support for SMB and Windows network protocols.
What NAS drive capacity do I need for architectural models?
Choose a capacity based on your current project files, other projects and the number of versions you want to keep. Then work out how much space is usable in your chosen NAS configuration; the nominal capacity of each drive alone won’t tell you the total.