Who is this NAS choice relevant to?

Designer preparing a handover

You want to be able to restore a final concept version and check that the project folder you hand over is complete. Adobe explains that linked files, such as images, can be stored separately from the InDesign document.

Small design team

You share concepts with colleagues and want to set permissions for each user. The National Cyber Security Centre emphasises that a NAS is not a substitute for a separate backup.

Manager of a growing project archive

You keep versions of several projects and weigh up usable storage capacity and internal expansion options against the drives and backup storage you’ll need.

What should you look for in a NAS for design concepts?

NAS with two drive bays

Choose this option: if your current projects, saved versions and expected growth fit within your calculated usable capacity.

Bear in mind: there’s less room for internal expansion than with a four-bay model; drive mirroring is no substitute for a separate backup.

NAS with four drive bays

Choose this option: if you want to keep several projects and versions and need more internal drive capacity.

Bear in mind: calculate the usable capacity for your chosen drives and configuration; extra bays don’t remove the need for a separate backup.

Standalone NAS hard drive

Choose this option: if you already have a NAS and want to add or replace storage media.

Bear in mind: check the exact NAS model and compatibility; a standalone drive doesn’t provide network access or a backup function by itself.

What to consider What to look for when buying Who is this important for?
Restoring the right version Check version history for your chosen configuration, whether there’s a separate backup destination, and how to carry out a test restore. If I need to retrieve an earlier design version before handover, I want to test the restore process in advance. Around 29% of consumers prioritise restoring an earlier version.
Complete handover folder Check how to copy, find and open project folders containing linked files, following the workflow for your design software. When I hand over a project, I want to keep the necessary assets as well as the visible design file. Around 24% of consumers prioritise a complete project handover.
Access permissions Check user and folder permissions and decide how files will be shared, including if you need remote access. When working with others on client projects, I want to control who can open or edit concepts. Around 18% of consumers prioritise access control.
Usable capacity Factor in projects and versions, estimate future growth, and check drive compatibility, whether drives are included, and the space available for a separate backup. If my archive needs to hold several projects and versions, I want to base capacity on my own configuration. Around 18% of consumers prioritise archive storage.
Network file transfers Compare the network ports on the NAS, computer and networking equipment; manufacturers’ measurements don’t guarantee the speed of your connection. When I transfer large project files over my existing network, I want to know whether my devices and connection can handle it. Around 12% of consumers prioritise transfer speeds.

Common pitfalls when setting up a NAS archive

  • Mistaking drive mirroring for an independent backup

    RAID can help with certain drive failures, but the National Cyber Security Centre says it is no substitute for a separate backup.

    Set up a backup destination alongside your NAS and restore a test file before handover.

    Allow for the extra storage destination and the time needed to set it up.

  • Keeping only the visible design file

    Adobe notes that linked images can be stored separately from an InDesign document. Copying a single file therefore isn’t always the same as handing over the complete project folder.

    Check which files your design software needs and open a restored copy of the handover folder.

    Allow time to track down any missing links or assets before handover.

  • Comparing only raw capacity or the enclosure

    Usable storage depends on the drives and configuration. For example, QNAP states that the TS-264 is supplied without hard drives.

    Compare the expected usable capacity, compatible drives and the complete planned setup, including a separate backup.

  • Assuming a 2.5GbE port guarantees fast transfers

    The NAS port is only one part of the connection; your computer and the rest of your network matter too. Manufacturers’ speed measurements are based on specific test conditions and configurations.

    Check the entire network path and only choose additional networking equipment if your other devices can work with it.

Relevant NAS brands to compare

Synology

The DS225+ and DS925+ are useful points of comparison for a defined archive and an archive that can grow, respectively.

  • Synology lists backup and sharing features, as well as 2.5GbE, for these models.
  • Usable capacity depends on the drives and configuration. Check the compatibility list; the quoted speeds are internal manufacturer measurements.

QNAP

The TS-264 is a two-bay option to compare if network ports, USB connections and the setup of a small team archive matter to you.

  • QNAP specifies two 2.5GbE ports and two USB 3.2 Gen 2 ports for the TS-264.
  • According to QNAP, the TS-264 is supplied without hard drives. The quoted transfer speeds apply to a specific configuration.

ASUSTOR

The AS5402T is a two-bay option to compare if you’re weighing up two 2.5GbE ports and internal M.2 options.

  • ASUSTOR lists four M.2 slots for the AS5402T.
  • According to ASUSTOR, the speeds on the product page were measured in an optimised laboratory and aren’t necessarily achievable on a typical work computer.

TerraMaster

The F4-424 is a four-bay option to compare for a growing project archive.

  • TerraMaster specifies two 2.5GbE ports and a range of RAID options.
  • The manufacturer’s test with four drives in RAID 0 doesn’t tell you what speed you’ll get with a backup or redundancy configuration.

UGREEN

The NASync DXP2800 is another two-bay option to compare if you’re looking for a diskless NAS with 2.5GbE.

  • UGREEN lists an Intel N100 and 8 GB DDR5 for the NASync DXP2800.
  • Storage drives are sold separately; check that the exact version is suitable and review the delivery terms for your situation.

Joybuy products for a design archive

This selection includes standalone Synology NAS drives for anyone who already has a compatible NAS, as well as Synology NAS enclosures for centralised storage. Before you buy, check which configuration suits your required usable capacity.

Synology SATA HDD 6TB

Synology SATA HDD 6 TB

A standalone NAS hard drive for anyone who already has a compatible Synology NAS.

6 TB of storage; this is not a NAS enclosure, and the drive doesn’t provide network access or a backup function by itself.

View at Joybuy
Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

A NAS enclosure for anyone who wants to store and share project files centrally.

Hard drives are not included; choose compatible drives for your preferred setup.

View at Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+

A Synology NAS enclosure to compare for centralised storage of project files.

Work out how much usable capacity you need in advance and check which drives are compatible with your chosen configuration.

View at Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

A four-bay NAS enclosure to consider for an archive containing several projects and versions.

Synology lists four drive bays for the DS925+; hard drives are not included.

View at Joybuy
Synology SATA HDD 16TB, 7,200 rpm

Synology SATA HDD 16 TB, 7,200 rpm

A standalone NAS hard drive for anyone who already has a compatible Synology NAS.

16 TB of storage; this is not a NAS enclosure, and the drive doesn’t provide network access or a backup function by itself.

View at Joybuy

Frequently asked questions about a NAS for design concepts

Is RAID 1 enough to archive design concepts?

No. The National Cyber Security Centre describes RAID as a way to help maintain availability in the event of certain drive failures, not as a substitute for a backup. Keep backup copies in a separate location and test whether you can restore files.

How can I check that an InDesign project is complete before handover?

Run a preflight and, where appropriate, use InDesign’s File > Package feature to gather the document and any required linked assets. Adobe explains that linked files can be stored separately from the document. Also open a restored copy; for other design software, follow its own workflow.

Can I install existing drives in a new NAS without any risk?

Don’t assume so. Synology warns that, for the DS225+, a drive containing existing data may be formatted and erased during installation. Check the manual and compatibility for the exact model, and make a separate copy first.

What should I consider alongside the NAS enclosure?

Check whether compatible drives are included, how much usable capacity the configuration provides, and what storage you need for a separate backup. Also check the warranty and service terms for the exact version.

Can I store client concepts containing personal data on a NAS?

It depends on the data and how it is processed. The Dutch Data Protection Authority says that personal data must be appropriately secured and must not be kept for longer than necessary; the GDPR does not set a general, specific retention period. If another party processes personal data on your behalf, the Dutch Data Protection Authority says you need a written agreement with them in a data processing agreement.