Who is a NAS suitable for?

Designer managing lots of revisions

Wants to retrieve an earlier version after overwriting or deleting a shared project file. Pay close attention to how snapshots are set up and how long they are retained.

Studio with a growing archive

Stores completed and current projects, and needs to weigh up the number of drive bays, usable capacity after RAID and the option to expand later.

Team working on files at the same time

Shares large files over the network. Check not just the NAS ports, but also the connections used by workstations and the network equipment in between.

What should you look for when choosing?

First decide how you want to restore files, then calculate the space you need. Finally, check that the network between the NAS and your workstation suits the way you work.

What to consider What should you look for? Who is this important for?
Earlier project versions Check the required file system or volume type, snapshot schedule, retention period and how to restore an individual file. If I want to quickly restore an overwritten design file to a usable earlier version, I focus on snapshot settings and recovery. Around 31% of consumers put version recovery first.
Space and growth Add up current projects, version history and expected growth; compare the usable capacity for your chosen drives and RAID configuration. For a studio with current and completed projects, archive space and room to grow are key. Around 25% of consumers prioritise usable storage and expansion.
Network performance Check the ports on the NAS, workstation and any network equipment in between. Don't treat stated throughput as a guarantee for a single computer. When I share large files with colleagues, I want to know whether the whole network path can handle it. Around 25% of consumers give network workflow their highest priority.
Recovery after data loss Plan a copy to a separate destination and test whether you can restore a project file from it. If I want to be able to restore a project even if something goes wrong with the NAS, I need a recovery option outside that storage. Around 19% of consumers prioritise recovery after data loss.

Common buying mistakes

  • Mistaking RAID or local snapshots for a full backup

    Depending on the configuration, RAID can provide drive redundancy, but snapshots on the same NAS still rely on that storage. The National Cyber Security Centre advises making backups and testing that you can restore from them.

    Also make a copy to a separate destination and test restoring an actual project file.

  • Assuming the stated maximum capacity is all immediately usable

    Usable capacity depends on the drives and RAID configuration you choose. Projects and saved versions share the available space.

    Calculate the space you need for projects, version history and growth based on your planned drives and configuration. Also check which drives are compatible with each model.

    Remember to factor in the cost of drives separately. Expanding the DS925+ also requires a separately sold expansion unit.

  • Assuming manufacturers' speed claims reflect performance at a single workstation

    Throughput depends on the test and network configuration. A claim based on two connected ports doesn't automatically mean that one computer will achieve the same speed.

    Check the network path between the NAS and your workstation before opting for a faster network configuration.

NAS brands to consider

Synology

The DS925+ is a four-bay DiskStation. Synology describes Snapshot Replication for shared folders on a compatible Btrfs volume.

  • The DS925+ has two built-in 2.5GbE ports and can be expanded with a separately sold unit.
  • The stated throughput was measured internally. Check drive compatibility; the DS925+ sold at Joybuy is supplied without drives.

QNAP

The TS-464 combines four drive bays with QTS storage pools, snapshots and two built-in 2.5GbE ports.

  • QNAP describes options for expanding network hardware.
  • Snapshots require a suitable storage setup. QNAP's throughput claim for port trunking isn't a guaranteed speed for a single workstation; drives are sold separately.

ASUSTOR

The Lockerstor 4 Gen2 (AS6704T) has four drive bays and 2.5GbE. ASUSTOR describes Snapshot Center for earlier versions on supported models.

  • There is an expansion option for 10GbE network hardware.
  • Volumes must be set up as Btrfs to use volume snapshots. Network expansion requires a suitable configuration.

TerraMaster

The F4-424 Pro is a four-bay NAS with two 2.5GbE ports. The TOS documentation describes Btrfs-based snapshots.

  • TerraMaster lists 32 GB DDR5 for the version described.
  • The snapshot function depends on Btrfs and the TOS configuration. TerraMaster's performance comparisons aren't independent measurements of a design workflow.

NAS systems at Joybuy

This selection includes Synology DiskStation NAS systems for central storage of project files, with a choice of drive bay counts and network options.

Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

Suitable for project folders where you want to set up snapshots and plan for future expansion.

Four drive bays and two 2.5GbE ports; expansion to nine bays is possible. Snapshot Replication requires a compatible Btrfs volume, along with a configured schedule and retention period.

Hard drives are not included.

View at Joybuy
Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+

Suitable for a central project archive where five drive bays and 2.5GbE network connections are useful.

Five drive bays and two 2.5GbE ports. The version described supports expansion.

Hard drives are not included; check which drives are compatible with the version you choose.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Suitable for central storage of large files when eight drive bays and the option to expand the network fit your setup.

Eight drive bays and two 2.5GbE ports; an optional 10GbE expansion is listed. Check that the additional network hardware is suitable for your entire network path.

View at Joybuy

Frequently asked questions

Is a snapshot the same as a separately saved design file?

No. A snapshot records the state of your data at a particular point in time. What you can restore depends on the schedule and which snapshots have been retained. A snapshot on the same NAS isn't a separate backup if the NAS is lost.

How do I set up a NAS for version recovery?

Create a suitable storage pool and volume, enable snapshots for the project folder, and test restoring an individual file. Check the requirements for your model: Synology and ASUSTOR specify Btrfs for the snapshots mentioned; QNAP describes the storage pool and volume setup for QTS.

What ongoing costs and aftercare should I allow for?

As well as the NAS, budget for drives, a separate backup destination and any network expansion you may need. Test recovery regularly. For consumer purchases in the Netherlands, statutory warranty is separate from any additional manufacturer's warranty; according to the Dutch Government, the seller is your point of contact if a product is faulty. Check separately which terms apply to business purchases.

Does storing Dutch customers' files on a NAS have to comply with the GDPR?

If you process customers' personal data, the GDPR applies and you must decide on appropriate security measures for your situation. The Dutch Data Protection Authority doesn't require a particular NAS brand, RAID level or standard snapshot retention period. For files that don't contain personal data, using a NAS alone doesn't trigger this GDPR obligation.

Does a second NAS port automatically make a large file quicker to access?

No. QNAP's throughput claim for two ports applies when using port trunking; Synology describes its throughput figures as internal measurements. Check the entire network path and don't treat those figures as a guarantee for a single workstation.