Who is a NAS suitable for?

Student with software-specific CAD projects

You want to know whether a NAS is suitable for your active design work or mainly for exports. According to Autodesk Support, projects saved in Autodesk Fusion are normally stored in the cloud; you can create a local file by exporting them.

CAD project group

You’re looking for a central place to store project files and need to agree who can view or edit them. Shared storage doesn’t automatically mean a CAD collaboration workflow is supported, so check the workflow and set user permissions.

Student looking to prevent project loss

You want to be able to restore versions or backups before a deadline. A central storage location or RAID setup isn’t a substitute for a separate backup, as the National Cyber Security Centre points out.

What should you look for when choosing?

Start by checking how your CAD software saves files and whether it allows you to share them. Then decide whether a NAS is right for central storage or archiving. Autodesk Support says that not every NAS configuration has been tested or designated as supported for Autodesk software.

NAS for central project storage

Choose this if: your CAD software allows the network workflow you have in mind and you want to share files between devices or project members.

Consider: you’ll need to manage user permissions and administration, and arrange a separate backup.

NAS for archiving or as a backup destination

Choose this if: your CAD software manages active projects elsewhere or you mainly want to keep restorable exports.

Consider: exporting and restoring files require a consistent process. Test that you can restore a project file.

Use your CAD software’s storage

Choose this if: the existing project storage meets your needs and you don’t need a shared local file space.

Consider: still check how to make a separate, restorable copy and find out what arrangements your school has for project files.

Concern What to check before buying Who should consider this?
Will the storage work with my CAD software? Note the exact software and file types; test opening, saving and exporting. If I want to store my active design on a NAS, I first want to know whether my software allows that workflow; around 36% of consumers prioritise software compatibility.
Can I restore my work? Check that you have a separate backup destination and test restoring a project file. As a deadline approaches, I want to be able to retrieve a usable copy of my project; around 29% of consumers put data retention and recovery first.
Can project members share files? Check user and folder permissions, and agree who will edit the latest design version. If we’re working as a project group, I want to be able to manage shared files without assuming everyone can edit the same CAD file at the same time; around 21% of consumers say sharing is their main concern.
What do I need for a complete setup? Check whether drives are included, which drives are compatible and where the backup will be stored. If I’m putting together a NAS for a school project, I want to know in advance which components and additional storage I’ll need; around 14% of consumers focus mainly on the overall setup.

Pitfalls when buying a NAS for CAD

  • Assuming a NAS can replace your CAD software’s storage

    Active project storage may be part of the software workflow. Autodesk Support says Fusion projects are normally stored in the cloud, and a NAS isn’t automatically a supported storage location.

    Check the exact software and test the file workflow before using a NAS for active projects. If needed, use exports as an additional archive.

    Exporting, version control and recovery require an additional process that you’ll need to maintain.

  • Thinking RAID is a complete backup

    A central NAS or RAID won’t protect against every cause of data loss. The National Cyber Security Centre stresses that a NAS isn’t a substitute for a backup.

    Keep a separate backup and regularly test whether you can actually restore a CAD project, as the Digital Trust Center also advises.

    You’ll also need to maintain the backup destination and keep testing the recovery process.

  • Looking only at the NAS enclosure

    According to UGREEN, storage drives are sold separately for the UGREEN DH2300 and DXP2800 models mentioned here. So an enclosure doesn’t automatically give you a complete storage setup.

    Check what comes with your chosen model, which drives are suitable and where you’ll keep a separate backup.

  • Assuming a faster network port means faster CAD work

    A 2.5GbE port is only useful if your other network equipment and connection can support it. Autodesk Support doesn’t test or certify every NAS for Autodesk products.

    Check your entire network connection and test your own CAD files before treating port speed as the deciding factor.

    You may also need suitable network equipment to make use of the higher network speed.

NAS brands to consider

Synology

The DS223j is a two-bay model with Synology Drive and options for separate backups. According to Synology, the DS225+ also has a 2.5GbE port.

  • The product specifications describe options for sharing, versioning and backups.
  • Check the drive compatibility list for the DS225+. The transfer speeds published by Synology are based on in-house testing and aren’t guaranteed CAD performance.

QNAP

According to QNAP, the TS-233 is a two-bay NAS for file storage and sharing, with room for SATA hard drives or compatible SATA SSDs.

  • QNAP lists two drive bays for the TS-233.
  • QNAP lists one gigabit network port and 2 GB of non-upgradable memory, so don’t choose this model solely because you need 2.5GbE.

ASUSTOR

According to ASUSTOR, the Drivestor 2 AS1102T has two drive bays and a 2.5GbE network port.

  • ASUSTOR specifies support for 3.5-inch SATA hard drives.
  • According to ASUSTOR, the model has 1 GB of non-upgradable memory. The faster port only helps if the rest of your network is set up to support it.

UGREEN

UGREEN describes the NASync DH2300 as suitable for file storage and backups; the DXP2800 has a 2.5GbE port and supports additional applications.

  • UGREEN says that storage drives are sold separately for both models mentioned here.
  • According to UGREEN, the DH2300 doesn’t currently officially support Docker. The DXP2800 speed claims are from the manufacturer, not from independent CAD testing.

Joybuy NAS products for project files

These Synology NAS models are designed to store or share project files. Consider them as potential storage or archive destinations; their inclusion here doesn’t confirm that an active CAD workflow is supported directly on a NAS.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

Could be a good fit if you’re looking for a central place to store project files. First check whether your CAD software allows the network workflow you have in mind, and plan a separate backup.

Hard drives aren’t included; check which compatible drives are suitable for your setup.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Could be a good fit if you’re looking for a central place to store project files. First check whether your CAD software allows the network workflow you have in mind, and plan a separate backup.

Check which compatible hard drives you’ll need before using the NAS for storage.

View at Joybuy
Synology DiskStation DS925+ without hard drives

Synology DiskStation DS925+ without hard drives

Could be a good fit if you’re looking for a central place to store project files. First check whether your CAD software allows the network workflow you have in mind, and plan a separate backup.

The product title says that no hard drives are included; check which compatible drives are suitable for your setup.

View at Joybuy

Frequently asked questions

Can I store an Autodesk Fusion project directly on my NAS?

According to Autodesk Support, Fusion projects that are saved normally are stored in the cloud. Autodesk describes exporting to a .f3d or .f3z archive to create a local file that you can keep on a NAS; don’t treat this export as a replacement for your usual Fusion project storage.

Is having two drives in RAID the same as having a backup?

No, RAID isn’t a substitute for a separate backup. The National Cyber Security Centre recommends keeping a separate backup; also test that you can restore your project file.

What should I look out for during the initial setup?

Give project members only the permissions they need, change default passwords and think carefully before making your NAS accessible over the internet. These are security recommendations from the National Cyber Security Centre, not general legal requirements for installing a NAS.

Are the drives included, and what if the product develops a fault?

Check the product information: UGREEN says the NASync DH2300 and DXP2800 are sold without storage drives. If a product develops a fault, the Dutch government says you should contact the seller. The Netherlands has no fixed general statutory guarantee period, and the assessment depends on what you could reasonably expect from the product.

Can I store pupil or student data on my own NAS?

Don’t store this type of data on a personal NAS before checking your educational institution’s policies. The Dutch Data Protection Authority describes GDPR responsibilities for schools, specifically primary and secondary schools; whether your project can be stored on a personal NAS also depends on your school’s policies and the data in the project.