Who needs a CAD NAS before a move?

A studio looking to move files safely

Wants to be able to restore project files if a device, file or step in the move goes wrong. The NCSC stresses that a NAS is no substitute for a separate backup.

A team working together on CAD files

Needs to check that its CAD application, access permissions and file locking suit the chosen workflow. For file-based collaboration in Revit, Autodesk highlights a local network environment as an important requirement.

A studio with a growing project archive

Wants to match drive bays, usable storage and network connections to its current archive and expected growth. Synology and QNAP product specifications, for example, state the number of drive bays on each model.

What should you consider when choosing one?

First, decide whether the NAS will be used for archive storage or as an active working environment for the team too. You can then plan recovery, capacity and the transfer to your new studio.

For this purchase, each buyer has a main priority; each row describes one of them.

Consideration What to look for when buying Who this matters most to
Recoverable project copy Check whether you can keep a separate copy in another location and carry out a test restore. I want to be able to restore a project version if something goes wrong during the move. Around 33% of consumers put recoverability first.
CAD collaboration Make a note of the application and test opening, simultaneous access, saving and recovery with representative files. I want to know whether my team can work on the same files using its own CAD workflow. Around 27% of consumers put effective CAD collaboration first.
Capacity and growth Measure project folders and archived versions, then calculate the usable space for your chosen drive configuration. I want space for existing projects and future growth after the move. Around 20% of consumers put archive growth first.
Transfer to the new studio Compare the connections on the NAS, switch and workstations, and test in advance with representative project folders. I want to transfer and check the archive before moving day. Around 20% of consumers put transferring the archive before moving day first.

What pitfalls should you avoid when choosing a NAS for CAD projects?

  • Mistaking RAID for a backup for the move

    The NCSC says RAID can help keep a NAS available if a drive fails, but RAID is no substitute for a backup.

    Keep an extra copy elsewhere and, before transport, check that you can restore a representative project.

    Allow for a separate backup destination and time for a test restore.

  • Assuming every network share is suitable for collaborative CAD work

    Autodesk highlights file locking as a consideration and specifically warns that file-based collaboration in Revit can have higher latency outside a local network.

    Test the exact application and workflow with project files, especially if team members will be working from different locations during the move.

    A different collaboration environment may require extra configuration or support.

  • Comparing only the enclosure or raw capacity

    QNAP says the TS-264-8G and TS-464-8G are supplied without hard drives. For the DS1525+, Synology distinguishes between drives on and off its compatibility list.

    Make a parts list for each option and calculate the usable space for your chosen drive configuration.

    Include compatible drives, separate backup storage and any network equipment you may need in your plans.

Which NAS brands are worth comparing?

Synology

The DS225+ has two drive bays, while the DS1525+ has five and supports expansion, according to Synology.

  • Synology describes features for snapshots and off-site version backups.
  • Check drive compatibility for each model. Synology states that support is limited for drives not on its compatibility list. This is not an independent CAD test.

QNAP

The TS-264-8G has two drive bays and the TS-464-8G has four; the official specification pages list two 2.5GbE ports for both models.

  • The two models offer different numbers of drive bays to compare against your archive needs.
  • QNAP says both models are supplied without hard drives. The specifications alone do not confirm that either model is suitable for a specific CAD workflow.

ASUSTOR

According to ASUSTOR, the AS5402T has two drive bays, two 2.5GbE ports and M.2 slots.

  • The manufacturer lists SMB support and expansion options.
  • Two main drive bays limit the space available for adding drives later. SMB support alone does not guarantee smooth collaboration with a specific CAD application.

NAS models with four or more drive bays at Joybuy

These models are suited to studios looking for four or more drive bays for their project archive and potential growth. Check the capacity, drive configuration and separate backup solution you need for your own setup.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

Suitable for an archive where five drive bays and room for expansion are important.

The product description lists five drive bays, expansion to 15 drives and two 2.5GbE ports. Hard drives are not included.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Suitable for an archive where eight drive bays and expansion options are important.

The product description lists eight drive bays, expansion with an expansion unit and two 2.5GbE ports.

View at Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

Suitable for a studio looking for four drive bays and room to expand.

The product description lists four drive bays, expansion to nine, two 2.5GbE ports and M.2 NVMe cache support. Hard drives are not included.

View at Joybuy
Synology DiskStation Intel Celeron J4125 Q

Synology DiskStation Intel Celeron J4125 Q

Suitable for a studio looking to manage project versions and get four drive bays with drives included.

The product description lists four drive bays, four 12 TB SATA drives, two 1GbE ports and snapshot technology for restoring previous file versions.

View at Joybuy

Frequently asked questions about a CAD NAS before a move

Is RAID enough to keep CAD projects safe during a move?

No, RAID is no substitute for a backup. The NCSC distinguishes between redundancy in the event of drive failure and a backup copy. Keep a separate copy, and before the move, test that you can restore a representative project.

Can the team work directly from the same NAS in any CAD application?

You can’t tell from the NAS specifications alone. Autodesk highlights file locking as a consideration for AutoCAD and warns that file-based collaboration in Revit can have higher latency outside a local network. Test the exact application and workflow before using the NAS as an active project server.

Which settings should you pay attention to during installation?

Give staff only the access they need, change default passwords and decide carefully whether you need remote access. This is in line with the NCSC’s security advice; you’ll need to check the settings for your specific model yourself.

What should a studio check besides the NAS enclosure?

Check which drives are included, whether your chosen drives are compatible with the model and how you’ll provide a separate backup destination. QNAP, for example, says the TS-264-8G and TS-464-8G are supplied without hard drives.