Who is this guide for?

Small CAD team sharing files

You want to access projects from one central location, but need to agree who can edit each file and how all workstations will use the same paths. Autodesk Support outlines these considerations for shared Inventor files.

Team that needs to restore earlier versions

You want to be able to retrieve changed or deleted project files, as well as keep a separate copy for long-term recovery or storage at another location. Synology distinguishes between snapshots and backups.

Team with heavy network traffic

Compare the network connections on your NAS, switch and workstations before considering extra network ports or an SSD cache. The connections throughout the network determine what you can make use of.

What should you look for?

First, check whether your CAD software supports a shared folder managed through manual agreements, or whether you need managed check-in/check-out. Then consider recovery, the complete network connection and what else you’ll need alongside the NAS enclosure.

NAS as a shared network folder

Suitable when: a small team can agree among themselves who can edit project files. Autodesk specifically lists this as an option for Inventor teams with 1–2 users.

Keep in mind: users must prevent conflicts themselves and set the same paths and access permissions on every workstation.

NAS alongside a separate PDM setup

Suitable when: you need version management, controlled access or check-in/check-out. First, check the requirements of the CAD and PDM software you use.

Keep in mind: don’t assume any NAS can act as a PDM server; the software may require separate server components.

What to consider What to look for when buying Who is this important for?
Access and file conflicts Check how your CAD software works, as well as your project paths and user permissions. When I share project files with colleagues, I want to know who can edit a file and how we can prevent conflicts. Around 31% of consumers put collaboration at the top of their list.
Project recovery Check for snapshot support and also set up a backup to a separate destination. If a project version is changed or deleted, I want to be able to return to an earlier file and consider how to recover it if the primary storage fails. Around 25% of consumers put recovery first.
Network performance Compare the connections on the NAS, switch and workstation; don’t treat port speeds as measured CAD performance. When I open large projects over the network, I want to know whether the connection between my workstation and the storage is compatible throughout. Around 25% of consumers put network connectivity first.
Overall setup Check what’s included in the offer and allow for drives, network equipment and a backup destination. When I’m weighing up the storage and recovery options I need, I want to know in advance what else is required for the NAS setup. Around 19% of consumers prioritise the overall setup.

Common buying mistakes

  • Assuming a NAS manages simultaneous CAD edits

    According to Autodesk, users working from a shared Inventor network folder need to prevent conflicting changes themselves. Simply storing files in the same place won’t manage this for you.

    Decide in advance whether manual agreements are enough or whether you need a PDM workflow with check-in/check-out.

    A separate PDM setup requires its own planning and configuration.

  • Relying on snapshots as your only recovery option

    Restoring an earlier storage point and keeping a backup for when the primary storage is unavailable are two different things. Synology describes snapshots and Hyper Backup as separate features.

    Decide which files you need to be able to recover, then set up suitable backups to a separate destination.

  • Assuming port speed guarantees CAD performance

    The connection between the workstation, switch and storage also matters; a NAS port on its own doesn’t measure performance for your CAD workload.

    Check the entire connection and test with representative projects if transfer speed is a deciding factor.

    You may need suitable network equipment or adapters to ensure the components throughout the connection work together.

  • Comparing NAS enclosures as if drives are included

    QNAP states that the TS-464 is sold without HDDs; what’s included may vary between offers.

    Before buying, check which drives and other components are actually included in the offer you’ve chosen.

    You’ll need to choose suitable hard drives separately if they aren’t included.

Brands to compare

Synology

The manufacturer describes the DS925+ as a four-bay storage model with two built-in 2.5GbE ports and M.2 slots. Synology also documents separate applications for snapshots and backups.

  • The documented features give you a starting point for assessing storage and recovery separately.
  • These specifications aren’t an independent CAD performance test; check drive support and recovery options for your chosen configuration.

QNAP

The official TS-464 specifications list four bays, two 2.5GbE ports, M.2 slots and a PCIe expansion slot.

  • The expansion options may be useful if you’re looking to review your network and storage setup further.
  • QNAP states that the TS-464 is sold without HDDs. An optional network card also requires compatible network components; the specifications don’t predict CAD performance.

ASUSTOR

According to ASUSTOR, the LOCKERSTOR 4 Gen2 (AS6704T) has four bays, two 2.5GbE ports and four M.2 slots.

  • The manufacturer says you can use a 10GbE expansion card.
  • This information applies to the AS6704T and not automatically to the differently configured v2. Also check that the rest of your network is compatible with the expansion card.

TerraMaster

TerraMaster describes the F4-424 as having four bays, two 2.5GbE ports and M.2 slots for SSD cache.

  • You can compare the listed connections and expansion options with the needs of your own network.
  • TerraMaster’s transfer speed measurement uses a specific RAID 0 test setup and isn’t an expected speed for CAD projects.

UGREEN

UGREEN describes the NASync DXP4800 Plus as a four-bay model with 2.5GbE and 10GbE connections.

  • The different network ports may be useful if your other network components are set up to support them too.
  • The product specifications aren’t an independent comparison of CAD use; a 10GbE connection alone doesn’t tell you how quickly your projects will run.

Joybuy products

These Joybuy NAS models are designed to store and share CAD project files from one central location.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

An option for managing and sharing project files centrally. The product information lists expandable storage; check whether the expansion options suit your planned setup.

HDDs aren’t included and must be chosen separately.

View at Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+ NAS

An option for teams that want to share project files centrally and expand storage when needed. Check that your planned expansion and backup setup fit the way you work.

View at Joybuy
Synology DiskStation DS423+ NAS

Synology DiskStation DS423+ NAS

An option if you want to make project files available centrally through shared folders. The product information lists snapshots for restoring earlier file versions.

Check that the network connection is suitable for your workstations and switch; the product description lists 1GbE connections.

View at Joybuy

Frequently asked questions

Can I use Inventor projects directly from a shared NAS folder?

Autodesk Support describes a shared network drive as an option for a small team of 1–2 Inventor users, provided they coordinate access to individual files themselves. Set the same project paths and suitable permissions on every workstation. For managed check-in/check-out, Autodesk describes Vault.

Are snapshots the same as a separate backup?

No. Synology describes snapshots as a way to restore an earlier storage point, and Hyper Backup as a tool for versioned backups and protection at another location. Check that your chosen models and file systems support the features you need.

How do I set up shared Inventor project paths?

According to Autodesk, users must be able to access the same network reference and path, with suitable access permissions. Test from every workstation that project files and references can be found correctly.

What should I consider when it comes to the warranty and overall setup?

Check whether hard drives are included in the specific offer; QNAP, for example, states that the TS-464 is sold without HDDs. The Netherlands Authority for Consumers and Markets explains the statutory warranty that applies to consumer sales. For a business purchase, don’t assume the same consumer rights apply; check the terms and conditions relevant to your purchase.

Which Dutch privacy rules are relevant to CAD projects stored on a NAS?

If an organisation processes personal data in CAD projects, it must protect that data appropriately and prevent unauthorised access, according to the Dutch Data Protection Authority. The appropriate measures depend on the processing and context; a NAS model alone doesn’t demonstrate compliance with the GDPR.