Who is a NAS for CAD projects for?

Administrator of a growing CAD project archive

You want to store large project folders centrally and leave room for future projects. Compare usable capacity after drive configuration, expansion options and which drives are compatible with the model. Synology and QNAP publish model-specific information about bays and drive configurations.

CAD team opening files at the same time

You want to prevent changes from conflicting with one another. So check file locking, user permissions and how your CAD software behaves when using a network share. Autodesk explains how file locking in AutoCAD is handled by the operating system or the file access method in use.

Project manager who wants to restore files

You want to be able to restore project documents after an error or incident. Assess the NAS alongside a separate backup strategy, and test that recovery works. The National Cyber Security Centre advises keeping multiple copies of important business data.

What should you look for in a NAS for large CAD folders?

First decide whether the NAS is mainly for archive storage or whether it also needs to support active collaboration. Then consider capacity, networking and recovery separately.

What to consider What should you check? Which shoppers is this relevant to?
Usable capacity Map out your current project folders and expected growth. Calculate the usable space based on the planned drives and RAID configuration; also check whether drives are included. If I want to keep large project folders in one place now and in the future, I need to know how much space will actually be left after choosing a configuration. Shoppers who prioritise capacity and room to grow make up around 31%.
File locking Test with multiple users to make sure permissions and file locking work with your CAD application. Assess Revit central models separately. If colleagues work on the same project files at the same time, I want to prevent changes from overwriting one another. Shoppers who prioritise simultaneous CAD editing make up around 25%.
Recovery after incidents Check which project folders are backed up, where a separate copy is stored and whether you can restore files. If a project file is deleted or damaged, I want to be able to restore a usable copy. Shoppers who prioritise recoverability make up around 25%.
Network throughput Compare the NAS network ports with those on your switch and workstations. Test your own workload; advertised port speeds don’t guarantee CAD performance. If I transfer large project folders over the local network, I want to know whether the entire network connection is up to the task. Shoppers who prioritise transfer speed make up around 19%.

Common mistakes when choosing and using a NAS

  • Assuming a fast network port means collaboration will work well

    A network port doesn’t tell you whether the CAD application handles file conflicts correctly. Autodesk says that file locking in AutoCAD is handled by the operating system or the file access method in use.

    Test your specific CAD workflow with multiple users, permissions and simultaneous file access before treating network speed as the deciding factor.

    Allow time for setup and compatibility testing. Depending on your workflow, you may also need a different file server or worksharing solution.

  • Treating RAID or snapshots as your only backup

    A central storage location is no substitute for a separate copy that lets you restore lost or damaged project documents. The National Cyber Security Centre advises keeping multiple copies of important business data, including one in a different location.

    Include your project folders in a separate backup plan and practise restoring files.

    A separate backup location requires its own storage, setup and regular recovery checks.

  • Confusing a NAS enclosure with a complete storage setup

    The QNAP TS-464 is supplied without hard drives. With Synology models, usable capacity depends on the drives and RAID configuration you choose.

    Before buying, check which drives are compatible with the exact model, whether they’re included and which configuration suits your storage needs.

    Factor suitable drives and any separate backup storage into the setup you need.

  • Moving a project folder without checking external references

    Autodesk explains that AutoCAD references using absolute paths may become inaccessible after being moved to a network location.

    Before a full migration, test a representative project folder with its associated reference files and restore the references if needed.

    Allow time to find and reset any missing references.

Brands to compare for CAD storage

Synology

The DiskStation DS925+ is a four-bay option for central storage, with two built-in 2.5GbE ports.

  • Synology lists expansion options for additional drives, as well as greater flexibility for certain HDDs and 2.5-inch SATA SSDs in 2025 DiskStation Plus models running DSM 7.3.
  • Usable capacity depends on your chosen drives and configuration. Check compatibility for the exact model; advertised throughput isn’t a real-world CAD performance test.

QNAP

The TS-464 combines four SATA bays with networking and M.2 options.

  • QNAP’s specifications list four SATA drive bays, M.2 slots and optional PCIe network expansion.
  • The TS-464 is supplied without an HDD. These hardware features alone don’t guarantee support for your CAD workflow.

ASUSTOR

The LOCKERSTOR 4 Gen2+ AS6704T v2 is a four-bay option with networking and M.2 capabilities.

  • ASUSTOR lists two 5GbE ports and four M.2 slots; 10GbE expansion is optional.
  • ASUSTOR’s stated transfer speeds were measured in its own lab under optimised conditions. Check that your network and CAD workflow are comparable.

UGREEN

The NASync DXP4800 Plus is a four-bay model whose networking options can be compared for use with a connected workstation.

  • European product information lists a combination of 10GbE and 2.5GbE.
  • The stated network combination isn’t an independent CAD performance measurement. Check software behaviour and support for your workflow separately.

NAS models on Joybuy for project archives

This selection focuses on Synology NAS models for growing project archives and shared files. Check separately whether your chosen NAS and software support your active CAD workflow.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

The five drive bays and expansion option are worth considering if you’re setting up a growing project archive.

Five bays; two built-in 2.5GbE ports. Expanding to fifteen drives requires expansion units. HDDs aren’t included. Also plan a separate backup and test recovery.

Shop at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

The eight bays offer a way to house a large project archive in an expandable storage setup.

Eight bays; two built-in 2.5GbE ports. The stated maximum capacity of 360 TB depends on an expansion unit; optional 10GbE expansion is listed. Also plan a separate backup and test recovery.

Shop at Joybuy
Synology DiskStation Intel Celeron J4125 Q

Synology DiskStation Intel Celeron J4125 Q

The described configuration with included drives may suit you if you’re comparing project archive setups with this amount of storage.

Four bays with four included 12 TB drives; the description states a total capacity of 48 TB. The network ports are 1GbE. Btrfs with snapshot technology is listed; also plan a separate backup and test recovery.

Shop at Joybuy

Frequently asked questions about NAS storage for CAD

Can I simply put a Revit central model on a NAS?

No. Check your worksharing setup and network conditions first. Autodesk recommends a Windows file server for Revit central models and describes file-based worksharing as being designed for a local area network. So don’t assess a NAS solely on the basis of its network protocols.

How can I check whether multiple AutoCAD users can open the same files?

Test the intended share with multiple users, including permissions and simultaneous access. Autodesk states that AutoCAD doesn’t manage file locking itself; this is handled by the operating system or the file access method in use.

What should I check after moving a CAD project folder?

Open a representative project and check the external references. Autodesk explains that references using absolute paths may become inaccessible after being moved to a network location and may need to be reset.

Are snapshots or RAID enough as a backup?

You should also plan a separate backup copy and test that recovery works. For important business data, the National Cyber Security Centre advises keeping multiple copies, including one in a different location. Snapshots can offer an additional recovery option, but they don’t replace that separate copy.

What privacy measures are relevant if CAD files contain personal data?

If your organisation processes personal data, security measures must be appropriate to the circumstances. The Dutch Data Protection Authority gives access control, updates and recoverable backups as examples; this doesn’t automatically make any particular NAS model or RAID level mandatory.