Who is this relevant to?

Designer working with frequent revisions

Wants to be able to retrieve a specific earlier version of a drawing or project folder. Synology and QNAP describe file versioning and snapshots as separate recovery options.

CAD team sharing files

Needs to check whether their CAD software and way of working together are suitable for network storage. Autodesk outlines considerations for network files, while SOLIDWORKS PDM includes separate revision and locking features.

Project manager with a growing archive

Needs to plan usable space for projects and revisions, as well as arrange a recoverable copy at a different destination. Synology notes that usable storage capacity depends on the drives and configuration used.

What should you look for when choosing?

What to consider What to look for when buying Who is this important for?
Finding earlier project versions Check file versioning, the version policy you can set and the snapshot requirements for the chosen volume. If I need to retrieve an earlier drawing or project state, I want to know which recovery point is available. Around 25% of consumers put version recovery first.
Suitability for your CAD workflow Check the documentation for your CAD package and test opening, saving, references and collaboration with representative projects. Autodesk highlights SMB support and network behaviour as points to consider. If I open and save files using my CAD software or work on them with others, I want to know in advance whether the network workflow is suitable. Around 25% of consumers give compatibility with their CAD workflow top priority.
Recovery if the NAS is lost Check which backup destinations and recovery procedures are available, and try restoring a project. If I want to be able to recover a project even if there is a problem with the primary NAS, I need a copy at a different destination. Around 20% of consumers prioritise this separate backup.
Usable space for projects and history Calculate the usable capacity with your chosen drives and configuration, allowing for project growth and version retention. If my project archive and saved revisions are both growing, I want to be able to plan for enough usable space. Around 15% of consumers make archive space their top priority.
Network transfer Check the network ports at both ends and test with representative project files on your own network. If I often transfer large project files, I want to know what my own network setup can handle. Around 15% of consumers put network throughput first.

Common purchasing mistakes

  • Assuming snapshots are a separate backup

    A snapshot can make an earlier state on the NAS available, but it is not the same as a copy at a different destination. A problem with the primary storage could also affect your ability to recover data from that storage.

    Plan both recovery points and a backup at a different destination, and try restoring a project.

  • Assuming central storage also manages CAD collaboration

    Saving files in a network folder is not the same as having locking and revision management features in a CAD-specific workflow. Autodesk highlights considerations around network files, while SOLIDWORKS describes features such as check-out and locking for PDM.

    Check the documentation for the specific CAD application and test references and collaboration before moving projects.

  • Taking raw capacity or manufacturer speeds as real-world performance

    Usable storage capacity depends on the drives and configuration. Manufacturer figures for network performance do not show how CAD projects will perform on your network.

    Calculate the usable space after configuring the storage, then test transfers with representative projects and your own network equipment.

Brands to consider

Synology

The DS925+ has four drive bays. Synology Drive file versioning and snapshots are separate features for version and recovery management.

  • Synology lists two 2.5GbE ports and expansion with a separate unit for the DS925+.
  • File versioning needs to be set up; snapshots depend on the volume configuration. A backup at a different destination is still needed.

QNAP

The TS-264 is a NAS with two drive bays and two 2.5GbE ports. QNAP describes snapshots as a way to recover earlier states, not as a separate backup.

  • The TS-264 has a compact design with two drive bays.
  • According to the official specifications, the TS-264 is supplied without hard drives. Check the storage configuration and arrange a separate backup.

ASUSTOR

The AS5402T has two drive bays, two 2.5GbE ports and M.2 slots. ASUSTOR lists support for Snapshot Center for the AS54 series.

  • The manufacturer lists snapshots among the supported features for this series.
  • Snapshots require a suitable volume configuration. Manufacturer test results do not show what speeds a specific CAD project will achieve on your network.

NAS models for a growing CAD archive

These NAS models offer different numbers of drive bays to help you plan storage for CAD projects and revisions. For each model, check the usable capacity, the drives you need and how well it fits your own workflow.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

An option for storing an archive of multiple projects and revisions in one central location.

The product description lists five drive bays, expansion with a unit and two 2.5GbE ports.

Hard drives are not included and must be chosen separately.

Joybuy
Synology DiskStation DS1825+ NAS

Synology DiskStation DS1825+ NAS

A model to consider when planning a larger storage setup for projects and saved revisions.

The product description lists eight drive bays, an expansion option and two 2.5GbE ports.

Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

A NAS with four drive bays for organising a growing project archive.

The product description lists expansion to nine bays with a unit and two 2.5GbE ports.

Hard drives are not included and must be chosen separately.

Joybuy

Frequently asked questions

Is a snapshot the same as a backup of my CAD project?

No. A snapshot can make an earlier state on the NAS available, but it is not a separate backup. QNAP and Synology also describe backups to a different destination; make sure you can restore a project too.

Can I work directly on Revit projects stored on a NAS without any further checks?

Check that it suits your workflow first. Autodesk highlights SMB support and Windows network behaviour as points to consider, and notes the risks of delays outside a local network when using Revit worksharing. A NAS model alone does not prove that your workflow is suitable.

How do I set up version recovery on a Synology NAS?

Enable Synology Drive versioning for the relevant team folder and set the maximum number of versions. Snapshots also have volume requirements, and you need to set up a schedule.

What additional purchases and warranty rights should I check?

Check whether hard drives are included, whether expansion units are sold separately and what storage you need for a backup at a different destination. According to ACM ConsuWijzer, consumers are entitled to a statutory guarantee alongside any manufacturer’s warranty; if you are buying for business use, you cannot automatically rely on the same consumer protection rules.

Does the GDPR set requirements for a NAS containing project files?

If an organisation processes personal data in those files, the Dutch Data Protection Authority says it must assess the risks and decide on appropriate security measures. This does not prescribe a standard NAS configuration; the measures required depend on the contents and use of the files.