Who is a NAS for CAD projects suited to?

Mobile CAD designer

Works between the office and other locations, and wants to know which project files are available locally and when changes are synchronised. Autodesk outlines considerations around synchronisation in AutoCAD, so check how your own application works.

Designer with a critical project archive

Wants to store CAD files centrally and be able to recover them after a mistake, failure or incident. The National Cyber Security Centre stresses that NAS storage or RAID is no substitute for a separate backup.

CAD team sharing files

Needs to manage access permissions, file references and simultaneous changes. SOLIDWORKS describes features in PDM such as checking out and locking files; find out whether this approach is needed for the CAD software you use.

What should you look for in a NAS for CAD?

First, decide how you’ll access projects away from the office and how team members will manage changes. Then choose the capacity, drive configuration and network connection to suit the way you work.

Consideration What to look for Best suited to
Offline working and synchronisation Check local synchronisation and test whether external references work on a second computer using a complete project. If I want to work on a project while travelling, I need to know which files are available locally and how changes will be synchronised again. Around 31% of consumers give offline project access their highest priority.
File recovery Plan a backup to a separate destination and test whether you can restore earlier project files. I want to be able to restore a usable project version after a mistake or incident; storage or mirroring alone isn’t enough. Around 25% of consumers prioritise recovering CAD files.
Collaborating on CAD files Check whether your software requires check-out, file locking or other arrangements for simultaneous changes. If several designers work on the same files, I want clear management of access and changes. Around 25% of consumers make controlled collaboration their top buying priority.
Capacity and expansion Allow space for projects, versions and backups; check the drive configuration and compatibility for the exact model. I want to leave room for a growing project archive and account for the drives and configuration I choose. Around 19% of consumers prioritise expandability.

Common pitfalls when choosing a NAS

  • Mistaking RAID or synchronisation for a complete backup

    A mirror or central storage won’t protect against every cause of loss or unwanted changes. That’s why the National Cyber Security Centre advises backing up important data separately as well.

    Plan a backup to a different location and test recovery with a project file. Allow for extra storage and management of these copies.

    A separate backup destination requires additional storage and its own recovery process alongside the NAS.

  • Assuming a shared folder manages CAD revisions

    Access to central files doesn’t automatically control who can edit a model or which revision is the current one.

    Find out whether designers edit the same files at the same time, and check what collaboration process your CAD software requires.

    CAD-specific data management may require additional software and setup.

  • Comparing only the advertised NAS network port

    A stated port speed or laboratory figure doesn’t guarantee the same transfer rate across your workstation and network.

    Check the connection from your workstation to the NAS. Treat manufacturer measurements as figures achieved under specific conditions, not as guaranteed CAD performance.

    You may need additional network equipment to take advantage of a faster connection.

  • Considering a diskless enclosure a complete storage solution

    Some models are supplied without hard drives. Synology makes full functionality, reliability and performance dependent on using compatible drives.

    Check drive compatibility for the exact model and confirm which components are included with the version you choose.

    Allow for choosing and buying compatible drives, as well as a separate destination for backups.

Brands to compare

Synology

The DS225+ has two SATA bays and the DS425+ has four. The product specifications for both models list a 2.5GbE port.

  • The models offer different numbers of drive bays to compare against your storage needs.
  • Synology makes full functionality, reliability and performance dependent on compatible drives; check the list for the exact model.

QNAP

The TS-264-8G is a two-bay NAS to consider if two 2.5GbE ports and M.2 slots are important to you.

  • QNAP lists 8 GB of memory and two M.2 slots for this model.
  • The TS-264 is supplied without hard drives. The hardware specifications alone don’t demonstrate CAD performance.

ASUSTOR

According to ASUSTOR, the AS5402T has two drive bays, two 2.5GbE ports and four M.2 slots.

  • The listed ports and slots make this model an option to compare with other configurations.
  • ASUSTOR’s published transfer rates are laboratory results achieved under optimised conditions; they aren’t a guarantee of performance for CAD use.

TerraMaster

The F2-424 is a two-bay NAS with two 2.5GbE ports and two M.2 slots.

  • TerraMaster lists 8 GB of pre-installed memory for this model.
  • The listed hardware specifications don’t prove CAD compatibility. TerraMaster lists a two-year limited warranty for the F2-424.

UGREEN

The NASync DXP2800 is a two-bay NAS with 2.5GbE to consider when choosing drives separately.

  • The product specification reviewed describes a diskless version.
  • Check the exact European version before buying; the product specifications aren’t an independent assessment of CAD workflows.

NAS systems at Joybuy for growing project archives

These product choices are aimed at central CAD project storage, with room for a growing archive in mind. Check the exact version, drive configuration and backup process for each model.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

Suitable for storing CAD projects centrally when you’re also allowing for archive growth.

Choose compatible drives for the exact model; the required drives need to be selected and installed separately.

View at Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Suitable for central CAD project storage when the ability to manage a growing archive is important.

This version is supplied without hard drives; also allow for a separate backup destination.

View at Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

Suitable for central CAD project storage when you’re allowing for possible archive growth.

Hard drives aren’t included. Check which drives are compatible with this model and plan a separate backup.

View at Joybuy

Frequently asked questions

Can you edit CAD projects directly from any NAS?

No. First, check the CAD application and workflow you use. Autodesk doesn’t test and certify every NAS or SAN device as supported or recommended. SOLIDWORKS PDM offers features for checking out and locking files when making design changes, but check whether this approach suits your software and project.

Is RAID enough for a backup?

No. According to the Dutch National Cyber Security Centre, RAID is no substitute for a backup. Keep backup copies in another location too, and test whether you can actually restore a project.

How can you access your files securely while travelling?

Don’t expose SMB directly to the internet. The National Cyber Security Centre advises considering a VPN if remote access is necessary, and allowing SMB only over that connection. For offline work, also decide how local changes will be synchronised in a controlled way.

What should you check during setup and your first CAD project?

Check drive compatibility for the exact NAS model, and make a copy of any data on drives you plan to reuse beforehand. Synology’s guide warns that setup may format an existing drive and erase its data. Then test whether linked files in a complete project are accessible from your workstation.

Which Dutch privacy rules apply to CAD storage?

If an organisation processes personal data in project files, it must protect that data appropriately under the GDPR. The Dutch Data Protection Authority doesn’t prescribe a universal NAS model, RAID level or fixed setting; tailor security to the risks of the processing.