Who is this choice relevant to?

Archive manager looking to prevent data loss

Looks after the permanent collection and wants to be able to recover deleted or lost projects. Synology Knowledge Center describes backups to destinations including external storage or another NAS.

Manager of a growing collection

Expects new CAD projects and versions, and compares available storage and drive bays. Synology and QNAP specifications show that the number of bays varies between models.

Coordinator of shared drawings

Manages members’ access and needs to distinguish between viewing files and editing the same drawing directly. Autodesk Support outlines points to consider around file locking when using a NAS.

What should you look for?

What to consider What should you check? Who is this for?
Recovery after data loss Check the backup destination and test whether you can restore a project; don’t treat RAID as a backup. If the primary NAS fails or projects are accidentally deleted, I want to be able to restore files from a separate copy. Around 31% of consumers say recovery after data loss is their top priority.
Room for growth and versions Calculate usable capacity based on the selected drives and storage configuration, allowing for new projects and retained versions. As the collection grows, I want to leave room for new drawings and older versions. Around 25% of consumers prioritise expandability and storage growth.
Access for members Check folder permissions and file sharing, and decide who can read, upload or edit files. If several members use the archive, I want to be able to decide who can open or edit files, based on their role. Around 19% of consumers say access management is their top priority.
Integrity when editing CAD files Test your CAD application, file locking, and opening and saving files at the same time using representative files. If members work directly on drawings, I want to prevent simultaneous saving from putting changes at risk. Around 25% of consumers prioritise safe CAD editing.

Common buying mistakes

  • Assuming RAID or snapshots are a complete backup

    An earlier version of a file on the primary NAS won’t protect you against every type of data loss affecting that storage. Synology Knowledge Center states that RAID is not a backup solution.

    Budget for a separate backup destination and decide how you’ll restore projects. Also set aside time to check your recovery process regularly.

    A separate destination requires additional storage and management alongside the primary NAS.

  • Assuming a NAS is automatically suitable as an active CAD workspace

    Autodesk Support describes issues where file locking is not correctly passed across the network. NAS specifications alone therefore don’t confirm that simultaneous editing will work with your chosen CAD software.

    Before allowing editing via the NAS, test the application, references and simultaneous saving tasks that members will actually use.

    Allow time to set up and test the workflow.

  • Confusing raw capacity with usable archive storage

    The selected storage configuration and number of installed drives both affect how much space is available for files and retained versions.

    Assess the current collection and expected growth, then calculate the usable capacity for your planned configuration.

    The QNAP TS-264 and TS-464 models reviewed are supplied without HDDs; check which drives you’ll need to buy separately for each version.

Brands to compare

Synology

According to Synology, the DiskStation DS425+ has four drive bays and a built-in 2,5GbE port.

  • Synology documents backups to destinations including external storage and another NAS.
  • Check the compatibility list for your chosen drives. These specifications don’t confirm that a CAD application can work directly from the NAS.

QNAP

The TS-264 has two drive bays and the TS-464 has four; QNAP lists two 2,5GbE ports on both models.

  • The number of internal bays gives you a clear point of comparison when planning for a growing collection.
  • QNAP specifies that the TS-264 and TS-464 models reviewed are supplied without HDDs. Check the version and operating system before attributing features to a model.

ASUSTOR

ASUSTOR lists two drive bays, SMB and Btrfs support, and two 2,5GbE ports for the AS5402T.

  • The specifications give you useful points of comparison for file sharing and connectivity with your network requirements.
  • The manufacturer also lists four M.2 slots; these don’t automatically increase HDD storage for the archive. Test file locking with your own CAD workflow.

TerraMaster

For the F2-424, TerraMaster lists two 2,5GbE connections, snapshots and various backup features.

  • These listed features can be considered when comparing backup and version management requirements.
  • These are features listed by TerraMaster, not independent performance measurements for CAD projects. Check what setup your archive requires.

UGREEN

UGREEN describes the NASync DXP4800 Plus as a NAS with four drive bays and 10GbE and 2,5GbE ports.

  • The port specifications are relevant if you want to match the NAS to a network with compatible equipment.
  • UGREEN states that drives are sold separately. Port speed alone doesn’t demonstrate a performance gain for this CAD archive; check drive compatibility too.

NAS models on Joybuy

This Joybuy selection features Synology NAS systems for network storage for a growing CAD archive. The models themselves don’t prove that direct CAD editing is supported.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

A NAS to consider for storing archive files on your network; check which drives are included with your chosen version.

Direct or simultaneous editing of CAD files has not been demonstrated. Autodesk Support highlights file locking as a point to consider, so test your own CAD application and workflow.

Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

A NAS to compare for network storage for a growing collection; choose a storage configuration and separate backup that suit your archive.

Direct or simultaneous editing of CAD files has not been demonstrated. Autodesk Support highlights file locking as a point to consider, so test your own CAD application and workflow.

Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

This version is designed for network storage and, according to the product title, is supplied without hard drives; bear this in mind when configuring your storage.

Direct or simultaneous editing of CAD files has not been demonstrated. Autodesk Support highlights file locking as a point to consider, so test your own CAD application and workflow.

Joybuy

Frequently asked questions

Is RAID enough to protect a CAD archive?

No, RAID is no substitute for a separate backup. Synology Knowledge Center states that RAID is not a backup solution; set up a separate copy as well and check that you can restore your projects.

Can several members edit the same AutoCAD drawing directly on the NAS?

Don’t assume this will work without testing. Autodesk Support describes situations where file locking isn’t correctly passed through a NAS, and doesn’t certify every NAS configuration for its software. Test the specific application and workflow before allowing simultaneous editing.

Do I need to buy hard drives separately?

It depends on the version. QNAP specifies that the TS-264 and TS-464 models reviewed are supplied without HDDs; UGREEN states that drives for the DXP4800 Plus are sold separately. Check drive compatibility for your chosen version too.

Can I share the archive’s CAD drawings publicly without restriction?

No, first check the rights to the drawings in question. Business.gov.nl lists drawings and architectural drawings among works that may be protected by copyright; a licence may grant permission for specific types of copying or distribution.

Does the GDPR apply to this archive?

It may do if files or metadata contain information about identifiable people. The Dutch Data Protection Authority states that personal data must be protected appropriately and not kept for longer than necessary; the archive’s purpose alone doesn’t determine whether files contain personal data.