Who is this guide for?

Studios with linked project files

After the move, you want to be able to open not just the main model but also the files it references. Autodesk sets out different transfer steps for Revit, depending on how you collaborate.

Studios with growing project archives

You want to leave room for project archives and backup versions. Compare the usable storage available with your chosen drive configuration, and check the number of drive bays and expansion options for the exact model.

Studios that want to test recovery in advance

You want to know the backup works before moving day. The National Cyber Security Centre advises restoring a backup and checking that it is usable.

What should you consider when choosing?

What to consider What should you look for? Who is this important for?
Full project recovery List linked files and project folders, then test restoring and opening them. If I want to open the entire project after the move, I’ll include linked files and relevant folders too. Around 36% of consumers give full project recovery top priority.
Copy stored off-site Plan a separate destination and check your backup schedule. I don’t want the NAS and its extra copy to be affected by the same location-related problems, so I’ll also arrange storage elsewhere. Around 29% of consumers put an off-site copy first.
Usable storage space Compare the drive bays, drive configuration and compatible drives. As project archives and versions grow, I want enough usable space after choosing a drive configuration. Around 21% of consumers give storage growth top priority.
Transfer and testing Check the NAS network ports as well as the rest of your network. I want to complete the copy and recovery test before moving day, so I’ll set aside time for both. Around 14% of consumers prioritise completing the transfer and test in good time.

Buying pitfalls

  • Copying only the main model

    A project copy may be incomplete if linked models or other essential project files are missing. Autodesk explains that the right approach for Revit depends on the workflow you use.

    Make an inventory of the project and open a restored copy with the required links before removing the old storage. For a Revit file-based model, you must also include the associated central backup folder.

    Missing project components can mean extra recovery work.

  • Treating RAID or snapshots as a separate backup

    RAID and snapshots can serve different purposes from a copy that remains available if the NAS or studio is lost. QNAP emphasises that RAID is not a backup.

    As well as the NAS, plan a separate copy at another location and test restoring it too. The National Cyber Security Centre advises keeping multiple versions of important business data.

    An additional storage destination or backup service also needs to be set up and managed.

  • Comparing a NAS enclosure as if drives were included

    A product version without hard drives means choosing suitable drives separately. Also, the maximum raw capacity is not the same as the usable space available after configuration.

    Check which drives are compatible with the exact NAS model and calculate the space based on your intended drive configuration. Synology advises checking compatibility for your chosen model and software version.

    Drives and any expansion unit are separate parts of your storage plan.

Brands to compare

The features listed apply to the specific models and product ranges below. Compare them with your storage plan and check the terms for the exact model.

Synology

The DS225+ and DS925+ offer a compact two-bay option and a four-bay model to compare side by side.

  • Synology lists a built-in 2.5GbE port and version recovery for the DS225+. The DS925+ has four drive bays and two 2.5GbE ports.
  • Check the current drive compatibility policy for the exact model and DSM version. Synology Knowledge Center explains that certain 2025 DiskStation Plus models running DSM 7.3 and later offer greater support for some third-party drives.

QNAP

The TS-264 is a two-bay NAS to compare if network ports, USB connections and storage configuration are important to you.

  • QNAP specifies two built-in 2.5GbE ports and two USB 3.2 Gen 2 ports for the TS-264.
  • QNAP states that RAID is not a backup. You still need a separate copy to protect against the loss of your NAS or its location.

TerraMaster

The F4-424 Pro is a four-bay model to compare if you want to factor in multiple drives and room for local expansion.

  • According to TerraMaster, this model has four drive bays, two 2.5GbE ports and two M.2 slots.
  • The drives you need and a separate off-site copy are separate parts of the plan.

ASUSTOR

The Lockerstor 4 Gen2 (AS6704T) is an option to compare if you need four drive bays.

  • ASUSTOR lists four drive bays and two 2.5GbE ports for the AS6704T.
  • These model specifications alone don’t determine how quickly your project copy will transfer or how recovery will work in your studio.

NAS systems at Joybuy

This selection focuses on Synology NAS systems for project files and growing studio archives. Also plan a separate off-site copy and check which drives are compatible with your chosen model.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

Suited to a studio looking to manage project files on network storage and make room for growing archives.

Five drive bays; expandable to fifteen drives; two 2.5GbE ports.

Hard drives are not included and must be chosen separately.

Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Suited to a studio comparing backup options for multiple endpoints and file sharing.

Eight drive bays; expandable with an expansion unit; two 2.5GbE ports.

Joybuy
Synology DiskStation DS925+ without hard drives

Synology DiskStation DS925+ without hard drives

Suited to a studio looking to combine network storage with space for project archives.

Four drive bays; expandable with an expansion unit; two 2.5GbE ports.

Hard drives are not included and must be purchased separately.

Joybuy

Frequently asked questions

Is RAID enough to back up my files for the move?

No. RAID is not a substitute for a separate backup. QNAP emphasises that RAID doesn’t protect against every type of data loss, while the National Cyber Security Centre advises keeping multiple versions of important business data. Plan a copy at another location too.

What should I check in a Revit project before removing the old storage?

First check how the project is shared and which linked files and backup folders you need. Autodesk sets out different steps for Revit depending on the workflow. For a file-based project, eTransmit, the folder structure and the associated central backup folder may all matter. Test that the transferred files open before removing the old location.

How can I tell whether my backup is usable?

Restore a copy and open the relevant files. The National Cyber Security Centre advises not to rely solely on a successful backup task, but to carry out a restore as well.

Should I choose a NAS with two or four drive bays for my studio?

Choose based on the usable storage and expansion capacity your project archives and versions require. Compare the exact models, drive configuration and compatible drives; the number of bays alone won’t tell you how much storage will be available after configuration.

What GDPR considerations apply to this backup?

If your studio processes personal data, the Dutch Data Protection Authority says you must choose appropriate security measures based on the risks. If you use an external party to process that personal data on your behalf, you need a data processing agreement. The use of an architectural model alone does not mean it contains personal data or that a specific NAS configuration is legally required.