Architect with one work computer
You want to save design files locally automatically and be able to restore an earlier, usable version. A NAS that only synchronises files won’t necessarily meet your recovery needs.
Choose a NAS that lets you create a restorable local backup from your work computer, and keep a separate copy elsewhere too. The National Cyber Security Centre recommends keeping at least three versions of important business data: the original and two backups. RAID or synchronisation alone does not provide this protection. If you use Revit worksharing, assess separately whether the NAS is suitable for storing the active central model.
You want to save design files locally automatically and be able to restore an earlier, usable version. A NAS that only synchronises files won’t necessarily meet your recovery needs.
You need to decide which files and associated backup folders to include. Autodesk treats the suitability of a NAS for storing an active Revit model as a separate question from backups.
You need to plan usable storage, copies in a second location and the drives you’ll need. The NCSC recommends keeping multiple versions of important business data.
Start with how you’ll restore files and where you’ll keep a copy outside the NAS. Then work out the usable capacity you need and check that the network connections are compatible with your equipment. The NCSC recommends keeping at least three versions of important business data: the original and two backups.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Restorable copies | Check whether the backup task can restore earlier versions, whether you have a separate copy outside the NAS and whether you can restore a project file. | If I need a usable version of my model after deletion, overwriting or a failure, the ability to restore it is my top priority. Around 36% of consumers prioritise restorable copies. |
| Storage without the cloud | Check which local backup tasks are available and whether features for online services or remote access are enabled. | If I want to keep project files local, I want to know which parts of the backup work without the cloud. Around 29% of consumers prioritise local control. |
| Usable capacity | Calculate how much space you need for project folders and the copies you want to retain. Check the usable space provided by your chosen drive configuration and whether drives are included. | If my project archive is growing, I want enough usable storage for the files and copies I want to keep. Around 21% of consumers prioritise capacity. |
| Transfer time | Check the NAS’s network connections and the other parts of your network. Test how long it takes to back up your own files. | If I transfer large models or files frequently, I want to know how the complete backup connection performs beforehand. Around 14% of consumers prioritise transfer time. |
RAID mirroring can help if a drive fails, but it isn’t a separate copy that protects you against accidental deletion, corruption, theft or fire, for example. Synchronisation also isn’t automatically the same as a backup task with restorable versions.
Keep an independent local copy in addition to the NAS, and test that you can restore an older project file.
A separate recovery copy requires extra storage space and time for management and recovery testing.
The drives you need and the space for a separate copy are part of the overall setup. The QNAP TS-264 and UGREEN NASync DXP2800 are supplied without hard drives, according to their manufacturers.
Before buying, check which drives you need, how much usable space your configuration will provide and whether the drives are compatible with your chosen model.
Remember to budget for compatible drives and a separate storage device for the extra copy.
A NAS that can store or back up files isn’t automatically suitable for hosting an active central Revit model. Autodesk sets out separate requirements and support limitations for network storage.
Assess the NAS as a backup destination first. For active worksharing, check the requirements of your BIM software and NAS model.
Compatibility research and troubleshooting may require extra management time.
The DS225+ is a two-bay NAS for local storage and backup tasks; this doesn’t represent the entire range.
The TS-264 is a two-bay NAS with connections for a local backup setup.
The AS5402T is a two-bay NAS for local storage, with the option of an external-drive workflow.
The NASync DXP2800 is a two-bay NAS for which UGREEN describes a computer-to-NAS backup workflow.
This Joybuy selection features Synology NAS models for local project backups and archives. Compare the number of drive bays and the amount of storage you actually need.
No image available
Worth considering if you want to set up local backups for a growing project archive.
Synology lists five drive bays, expansion to 15 drives with an expansion unit and two 2.5GbE ports. Hard drives are not included.
No image available
Worth comparing if you want to combine a local backup with storage for a project archive.
Joybuy Netherlands lists four drive bays and four included 12 TB HDDs (48 TB in total). The product name lists Intel Celeron J4125.
No image available
Worth considering if you want to set up local backups for an archive that can grow with you.
Synology lists eight drive bays, expansion with an expansion unit and two 2.5GbE ports.
No. RAID 1 on its own isn’t a separate backup. Mirroring can help if a drive fails, but it doesn’t protect against accidental deletion, corruption, theft or fire, for example. Keep a restorable copy outside the NAS as well.
Don’t assume every NAS is suitable. Autodesk sets out requirements for file-based worksharing on a local network, doesn’t certify every NAS, and has documented a specific issue with a Revit model on a QNAP with ZFS and compression enabled. A NAS that’s suitable as a backup destination isn’t automatically suitable as a workspace for the active model.
Include the full project structure and test the restore. For a file-based shared central model, Autodesk says the associated folder named [Centralfilename]_backup must stay with the model when you move or copy it.
Yes, test that the backup and restore work. The NCSC recommends carrying out a restore. Then open a restored project file too, to check that the data you need is usable.
Check whether hard drives are included, how much usable space your chosen configuration provides and what storage you’ll need for a separate copy. QNAP says the TS-264 is supplied without an HDD, while UGREEN says the DXP2800 is sold without drives. For the Synology DS225+, check that the exact drives you want are on Synology’s compatibility list.