Who is this NAS guide for?

Architect preparing for handover

You want to restore and open a clearly identifiable project version before handing it over to your client. For Revit, the right backup approach also depends on how you work with the model, as Autodesk explains.

Small design team

You store shared project files and want to check that your chosen storage, network connection and backup approach can handle files being used simultaneously.

Manager of a growing project archive

You’re weighing up space for multiple projects and saved versions against the drives you’ll need and a separate copy stored elsewhere. The National Cyber Security Centre advises protecting important data with backups.

What should you look for in a NAS backup?

First decide what you need to be able to recover. Then choose the complete project set and version history, and match the storage capacity and network connection to your working environment.

What to consider What should you check? Who should prioritise this?
Recoverable version Plan how long to retain versions and carry out a test restore. Open the restored project files to check that you can continue working with them. If I want to know before handover that I can actually open the right project version, I make recoverability my priority. Around 33% of consumers rank recoverability as their main consideration.
Complete project set Identify the software and collaboration method you use, and decide which model files and project folders need to be included. When I hand over a model, I want to make sure none of its associated files or folders are missing. Around 27% of consumers prioritise a complete, clearly identifiable project set.
Usable storage capacity List your projects, versions and expected growth, then calculate the usable capacity for your chosen drives and configuration. If I want to keep multiple projects and earlier versions, I factor in room to expand. Around 20% of consumers prioritise room to grow and version retention.
Data transfer Compare the connections on your NAS, computer and network equipment. Stated transfer speeds are no guarantee of the speed you’ll get for your project. If I want to transfer large project files using my existing workstation, I check that every part of the connection is compatible. Around 20% of consumers give ease of transfer top priority.

Common pitfalls

  • Mistaking mirroring for a complete backup plan

    Two mirrored drives are not the same as a separate copy stored elsewhere. If the NAS is lost or compromised, that local copy may also become inaccessible.

    As well as your NAS, plan a separate backup destination and test that you can restore files from it.

  • Copying only the visible model file

    According to Autodesk, with file-based Revit worksharing, the central model’s backup folder should stay with the model when you move or copy it.

    First establish how the model is managed, then test restoring the complete project set you intend to hand over.

  • Confusing raw drive capacity with usable storage

    Your chosen drives and configuration affect how much space remains available for projects and versions. A NAS enclosure may also be sold without hard drives.

    Compare configurations by usable capacity and allow for all the backup destinations you need.

NAS brands to compare

Synology

The DS225+ has two drive bays, while the DS925+ has four and is designed for archives that may grow.

  • Synology lists 2.5GbE and backup features for both models.
  • Usable capacity depends on the drives and configuration. Also check compatibility with your specific model and DSM version.

QNAP

The TS-264 is a two-bay model where network and connectivity options may be worth considering.

  • QNAP lists two 2.5GbE ports, M.2 slots and USB 3.2 Gen 2 ports.
  • The TS-264 is sold without hard drives. Stated transfer speeds depend on the configuration and don’t, by themselves, tell you how quickly your project can be recovered.

ASUSTOR

The AS5402T is a two-bay model for anyone considering network ports and additional M.2 storage.

  • ASUSTOR lists two 2.5GbE ports and four M.2 slots.
  • The stated throughput was measured in a laboratory under optimised conditions. Assess the backup setup for your own workstation separately.

TerraMaster

The F2-424 has two drive bays and is available with several backup applications.

  • TerraMaster lists dual 2.5GbE, RAID options, Snapshot and CloudSync.
  • The stated throughput test used two specific drives in RAID 0. This doesn’t indicate the recovery speed or redundancy of a different configuration.

UGREEN

The NASync DXP2800 is a two-bay model with 2.5GbE.

  • UGREEN lists support for third-party drives.
  • Check the compatibility list for the drive you want; drives are sold separately.

Joybuy products for project backups

These NAS models are for anyone looking for a central destination for project backups and planning for a growing project archive.

Synology DiskStation DS1525+ NAS

Synology DiskStation DS1525+ NAS

Worth comparing if you’re looking for a central NAS destination for backups, with space for a growing project archive.

Joybuy
Synology DiskStation DS925+, without hard drives

Synology DiskStation DS925+, without hard drives

A good fit if you’re looking for a NAS destination for project backups, with room for a growing archive.

Four drive bays. Supplied without hard drives, so you’ll need to plan for these separately.

Joybuy
Synology DiskStation DS1825+

Synology DiskStation DS1825+

Worth considering if you’re looking for a central destination for project backups and planning to expand your archive.

Hard drives are not included, so choose these separately.

Joybuy

Frequently asked questions

How can you check that your backup is usable before handover?

Restore files as a test and open the recovered project files. The National Cyber Security Centre advises carrying out a recovery and checking that it has succeeded.

For a shared Revit model, do you only need to include the model file?

Not before you’ve established how the model is managed. For file-based worksharing, Autodesk says the central model’s backup folder should stay with the model when you move or copy it. Other Revit workflows may have different backup options.

What should you consider alongside the NAS enclosure?

Check whether hard drives are included, how much usable space your chosen configuration provides, and how you’ll store a separate copy elsewhere. QNAP’s TS-264 is sold without hard drives; for Synology, usable capacity depends on the drives and configuration.

Which Dutch privacy rules might apply to a project backup?

If your organisation processes personal data in project files, you must protect it properly, according to the Dutch Data Protection Authority. If you appoint a processor to handle that data, your organisation and the processor must document the required arrangements in writing. Whether this applies depends on the contents of the project data and the service provider’s role.